The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Metal Content in Textile and (Nano)Textile Products
Open accessAbstract
Metals, metallic compounds, and, recently, metallic nanoparticles appear in textiles due to impurities from raw materials, contamination during the manufacturing process, and/or their deliberate addition. However, the presence of lead, cadmium, chromium (VI), arsenic, mercury, and dioctyltin in textile products is regulated in Europe (Regulation 1907/2006). Metal determination in fabrics was performed by inductively coupled plasma-mass spectrometry (ICP-MS) after microwave-assisted acid digestion. The ICP-MS procedure has been successfully validated; relative standard deviations were up to 3% and analytical recoveries were within the 90–107% range. The developed method was applied to several commercial textiles, and special attention has been focused on textiles with nanofinishing (fabrics prepared with metallic nanoparticles for providing certain functionalities). Arsenic content (in textile T4) and lead content (in subsamples T1-1, T1-2, and T3-3) were found to exceed the maximum limits established by the European Regulation 1907/2006. Although impregnation of yarns with mercury compounds is not allowed, mercury was quantified in fabrics T1-2, T5, and T6. Further speciation studies for determining hexavalent chromium species in sample T9 are necessary (hexavalent chromium is the only species of chromium regulated). Some textile products commercialised in Europe included in this study do not comply with European regulation 1907/2006.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“The mulberry plant accumulated high levels of Cd, and the Cd was transferred into silkworm.”
From Sustainable management of post-phytoremediation biomass (2025) · cites this paper as Rujido-Santos et al. 2022
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silver nanoparticles as a new generation of antimicrobials
Rai, M., Yadav, A., & Gade, A. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2008.09.002 · Cited by 6,173 · cited 1×
“Finally, several manufacturers of the studied textiles have specified the presence of silver ions or AgNPs in the garments since silver compounds offer biocide properties to the textiles [60].”
BackgroundNanoparticle Silver Released into Water from Commercially Available Sock Fabrics
Benn, T. M., & Westerhoff, P. (2008) · Environmental Science & Technology · doi:10.1021/es7032718 · Cited by 1,710
Dastjerdi, R., & Montazer, M. (2010) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2010.03.029 · Cited by 1,355 · cited 8×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialRecent advancements in natural dye applications: a review
Shahid, M., Shahid-ul-Islam, & Mohammad, F. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.03.031 · Cited by 991 · cited 1×
“As example, approximately 80% of leathers are chrome-tanned [1,2], while vanadium, chromium, barium, lead, copper, cobalt, and nickel are used in textile dyeing [3,4], and iron and manganese are used in bleaching processes [5,6].”
BackgroundSynthesis and characterization of zinc oxide nanoparticles: application to textiles as UV-absorbers
Becheri, A., Dürr, M., Lo Nostro, P., & Baglioni, P. (2008) · Journal of Nanoparticle Research · doi:10.1007/s11051-007-9318-3 · Cited by 975 · cited 1×
“Regarding zinc, textiles coded as T1, T2, and T3 were purchased from the same manufacturer who specified that these garments contained ZnONPs (Table 1) to provide UV protection [59].”
BackgroundYetisen, A. K., Qu, H., Manbachi, A., Butt, H., Dokmeci, M. R., Hinestroza, J. P., Skorobogatiy, M., Khademhosseini, A., & Yun, S. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b08176 · Cited by 752 · cited 10×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialThe Behavior of Silver Nanotextiles during Washing
Geranio, L., Heuberger, M., & Nowack, B. (2009) · Environmental Science & Technology · doi:10.1021/es9018332 · Cited by 631
Chemical Finishing of Textiles
Schindler, W., Hauser, P., & Hauser, P. (2004) · CRC Press eBooks · doi:10.1201/9781439823477 · Cited by 591
Human skin penetration of silver nanoparticles through intact and damaged skin
Larese, F. F., D’Agostin, F., Crosera, M., Adami, G., Renzi, N., Bovenzi, M., & Maina, G. (2009) · Toxicology · doi:10.1016/j.tox.2008.09.025 · Cited by 439 · cited 1×
“Moreover, recent studies reported possible penetration of metallic NPs through skin, which may pose a risk to human health [27,28].”
BackgroundBozzi, A., Yuranova, T., & Kiwi, J. (2005) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2004.11.010 · Cited by 370
Nanomaterials for Functional Textiles and Fibers
Rivero, P. J., Urrutia, A., Goicoechea, J., & Arregui, F. J. (2015) · Nanoscale Research Letters · doi:10.1186/s11671-015-1195-6 · Cited by 326 · cited 3×
“Regarding zinc, textiles coded as T1, T2, and T3 were purchased from the same manufacturer who specified that these garments contained ZnONPs (Table 1) to provide UV protection [59].”
BackgroundSelf-cleaning of modified cotton textiles by TiO2 at low temperatures under daylight irradiation
Bozzi, A., Yuranova, T., Guasaquillo, I., Laub, D., & Kiwi, J. (2005) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2005.03.019 · Cited by 298
Presence of Nanoparticles in Wash Water from Conventional Silver and Nano-silver Textiles
Mitrano, D. M., Rimmele, E., Wichser, A., Erni, R., Height, M., & Nowack, B. (2014) · ACS Nano · doi:10.1021/nn502228w · Cited by 274
Characterization of silver release from commercially available functional (nano)textiles
Lorenz, C., Windler, L., von Goetz, N., Lehmann, R. P., Schuppler, M., Hungerbühler, K., Heuberger, M., & Nowack, B. (2012) · Chemosphere · doi:10.1016/j.chemosphere.2012.04.063 · Cited by 264
Mcintyre, J. E. (2005) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845690427 · Cited by 196
Recent advances in TiO2-functionalized textile surfaces
Rashid, M. M., Simončič, B., & Tomšič, B. (2021) · Surfaces and Interfaces · doi:10.1016/j.surfin.2020.100890 · Cited by 194 · cited 1×
“Besides, TiO2NPs provide self-cleaning [16,53–56], ultraviolet protection [56,57], and antibacterial activity [56–58] to fabrics.”
BackgroundSelf-cleaning fibers via nanotechnology: a virtual reality
Tung, W. S., & Daoud, W. A. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03856c · Cited by 186 · cited 8×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialFactors determining percutaneous metal absorption
Hostynek, J. J. (2002) · Food and Chemical Toxicology · doi:10.1016/s0278-6915(02)00257-0 · Cited by 181 · cited 1×
“Counter ion, bond type, valence, pH [25], and dermal health [26] affect the percutaneous absorption of metals.”
BackgroundEl-Naggar, M. E., Shaheen, T. I., Zaghloul, S., El-Rafie, M. H., & Hebeish, A. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04315 · Cited by 164 · cited 1×
“Besides, TiO2NPs provide self-cleaning [16,53–56], ultraviolet protection [56,57], and antibacterial activity [56–58] to fabrics.”
BackgroundFunctional textiles for improved performance, protection and health
Pan, N., & Sun, G. N. (2011) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857092878 · Cited by 148
Durable antimicrobial cotton textiles modified with inorganic nanoparticles
Zhang, Y., Xu, Q., Fu, F., & Liu, X. (2016) · Cellulose · doi:10.1007/s10570-016-1012-0 · Cited by 146 · cited 8×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialIn situ sonosynthesis of nano TiO2 on cotton fabric
Sadr, F. A., & Montazer, M. (2013) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2013.09.018 · Cited by 143
In vitro absorption of metal powders through intact and damaged human skin
Filon, F. L., D’Agostin, F., Crosera, M., Adami, G., Bovenzi, M., & Maina, G. (2009) · Toxicology in Vitro · doi:10.1016/j.tiv.2009.01.015 · Cited by 116 · cited 1×
“Counter ion, bond type, valence, pH [25], and dermal health [26] affect the percutaneous absorption of metals.”
BackgroundBednar, A. J., Garbarino, J. R., Ranville, J. F., & Wildeman, T. R. (2002) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf025672i · Cited by 112 · cited 1×
“Arsenic compounds are effective insecticides and herbicides and the use of organoarsenicals is a common practice to control weeds in cotton fields and as defoliants of cotton plants [62].”
BackgroundICP-OES determination of metals present in textile materials
Rezić, I., & Steffan, I. (2006) · Microchemical Journal · doi:10.1016/j.microc.2006.06.010 · Cited by 99 · cited 4×
“[38] whose found Mo concentrations between 0.”
BackgroundMethodInfluentialThe mordant dyeing of wool using tannic acid and FeSO4, Part 1: Initial findings
Burkinshaw, S. M., & Kumar, N. (2008) · Dyes and Pigments · doi:10.1016/j.dyepig.2008.05.008 · Cited by 97 · cited 1×
“Iron can be used to form metal-complex dyes [3,46,48] but it is also used as a catalyst in the bleaching process [5,6] (hydrophobic components removal guarantees an optimum further dyeing).”
BackgroundZhu, C., Shi, J. Y., Xu, S., Ishimori, M., Sui, J., & Morikawa, H. (2017) · Cellulose · doi:10.1007/s10570-017-1289-7 · Cited by 96 · cited 8×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialCheng, X.-W., Guan, J.-P., Yang, X., & Tang, R. (2017) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2017.06.025 · Cited by 86 · cited 8×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialIn vitro percutaneous penetration of silver nanoparticles in pig and human skin
Kraeling, M. E. K., Topping, V. D., Keltner, Z., Belgrave, K. R., Bailey, K. D., Gao, X., & Yourick, J. J. (2018) · Regulatory Toxicology and Pharmacology · doi:10.1016/j.yrtph.2018.04.006 · Cited by 75 · cited 1×
“Moreover, recent studies reported possible penetration of metallic NPs through skin, which may pose a risk to human health [27,28].”
Backgroundvan der Goes, T. I. F., Lemus, M. R., Rodríguez-Lara, V., González-Villalva, A. E., Ustarroz-Cano, M., Cano-Gutiérrez, G., Gonzalez-Rendon, S. E., Montaño, L. F., & Altamirano-Lozano, M. A. (2013) · Journal of Immunotoxicology · doi:10.3109/1547691x.2013.789940 · Cited by 67
Gallo, J. M., & Almirall, J. R. (2009) · Forensic Science International · doi:10.1016/j.forsciint.2009.05.011 · Cited by 59 · cited 3×
“Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and total reflection X-ray fluorescence spectrometry (TXRF) [35,36] allow for fabric analysis without sample decomposition.”
MethodMitrano, D. M., Lombi, E., Dasilva, Y. A. R., & Nowack, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b01478 · Cited by 54
Biocidal effect and durability of nano-TiO2 coated textiles to combat hospital acquired infections
Kowal, K., Cronin, P., Dworniczek, E., Żegliński, J., Tiernan, P., Wawrzyńska, M., Podbielska, H., & Tofail, S. A. M. (2014) · RSC Advances · doi:10.1039/c4ra02759k · Cited by 45
Mitrano, D. M., Dasilva, Y. A. R., & Nowack, B. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02262 · Cited by 44
Rezić, I., Zeiner, M., & Steffan, I. (2010) · Talanta · doi:10.1016/j.talanta.2010.10.031 · Cited by 38 · cited 2×
“Since nitric acid has been found adequate to decompose textiles based on cotton, wool, polyester, flax, and hemp [35,38,39,41], a mixture of 69% nitric acid 33% hydrogen peroxide was firstly used for microwave-assisted acid digestion of (nano)textiles (Table 1).”
MethodFeiz, M., & Norouzi, H. A. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-2504-x · Cited by 35 · cited 3×
“This is the case of cobalt and nickel chlorides, as well as copper (I, II) sulphates [46].”
Background(2018) · Springer eBooks · doi:10.1007/978-3-319-58503-1 · Cited by 35
Determination of inorganic contaminants in polyamide textiles used for manufacturing sport T-shirts
Matoso, É., & Cadore, S. (2011) · Talanta · doi:10.1016/j.talanta.2011.11.022 · Cited by 34
Biver, M., Turner, A., & Filella, M. (2020) · Regulatory Toxicology and Pharmacology · doi:10.1016/j.yrtph.2020.104824 · Cited by 33 · cited 2×
“common type of polyester used in garments) [10].”
BackgroundManganese and Iron Bleaching and Oxidation Catalysts
Ronald Hage, B., de Boer, J. W., Gaulard, F., & Maaijen, K. (2013) · Advances in inorganic chemistry · doi:10.1016/b978-0-12-404582-8.00003-1 · Cited by 29 · cited 3×
“Furthermore, the presence of manganese in textiles is also related to the bleaching stage since several manganese complexes are used as catalysts to enhance this process [6].”
BackgroundExposure of women to trace elements through the skin by direct contact with underwear clothing
Nguyen, T., & Saleh, M. A. (2016) · Journal of Environmental Science and Health Part A · doi:10.1080/10934529.2016.1221212 · Cited by 25 · cited 3×
“Nitric acid has been commonly used in the decomposition of fabrics by microwave-assisted acid digestion [35,37–40] and convective (heating block) digestion [41].”
MethodApplication of Total Reflection X-Ray Fluorescence Spectrometry in the Textile Industry
Doğan, M., Soylak, M., Elçı, L., & von Bohlen, A. (2002) · Microchimica Acta · doi:10.1007/s006040200012 · Cited by 21 · cited 1×
“Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and total reflection X-ray fluorescence spectrometry (TXRF) [35,36] allow for fabric analysis without sample decomposition.”
MethodMenezes, E. A., Carapelli, R., Bianchi, S. R., Souza, S. N. D. P. E., Matos, W. O., Pereira‐Filho, E. R., & Nogueira, A. R. A. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.06.033 · Cited by 21 · cited 1×
“[37] in textile samples produced in Brazil and China.”
BackgroundIntroduction: Textile finishing
Montazer, M., & Harifi, T. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101214-7.00001-7 · Cited by 20
Yu, D., Wu, M., & Lin, J. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-7023-0 · Cited by 17 · cited 2×
“Iron can be used to form metal-complex dyes [3,46,48] but it is also used as a catalyst in the bleaching process [5,6] (hydrophobic components removal guarantees an optimum further dyeing).”
BackgroundA faster and more effective chrome tanning process assisted by microwave
Zhang, J., & Chen, W. (2020) · RSC Advances · doi:10.1039/d0ra04189k · Cited by 17 · cited 1×
“As example, approximately 80% of leathers are chrome-tanned [1,2], while vanadium, chromium, barium, lead, copper, cobalt, and nickel are used in textile dyeing [3,4], and iron and manganese are used in bleaching processes [5,6].”
BackgroundImproving the flame retardancy of natural fibres
Kozlowski, R. M., & Muzyczek, M. (2012) · Elsevier eBooks · doi:10.1533/9780857095510.1.30 · Cited by 16 · cited 2×
“Similarly, titanium can be present in some textile products after the Zirpro process with hexafluorotitanate salts for achieving fire-resistant textiles [8,9].”
BackgroundNanofinishes for protective textiles
Montazer, M., & Harifi, T. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101214-7.00018-2 · Cited by 10 · cited 1×
“New functionalities in textiles which incorporate metallic NPs include self-cleaning characteristics (ZnONPs and TiO2NPs) [15,16], hydrophobicity (SiO2NPs and ZnONPs) [11,17,18], antibacterial properties (AgNPs, CuONPs, ZnONPs, and TiO2NPs) [11,19,20], UV blocking activity (TiO2NPs, ZnONPs, CeO2NPs, and Al2O3NPs) [11,…”
BackgroundChemical modification of natural and synthetic textile fibres to improve flame retardancy
Joseph, P. F., & Tretsiakova‐McNally, S. (2013) · Elsevier eBooks · doi:10.1533/9780857098931.1.37 · Cited by 9 · cited 1×
“Furthermore, hexafluorotitanate salts [8,9,50] and TiO2NPs [51,52] can be used to achieve anti-flammable textiles.”
BackgroundRowe, T. (2009) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845696870 · Cited by 9
Water-repellent textile nanofinishes
Montazer, M., & Harifi, T. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101214-7.00012-1 · Cited by 4 · cited 3×
“Regarding zinc, textiles coded as T1, T2, and T3 were purchased from the same manufacturer who specified that these garments contained ZnONPs (Table 1) to provide UV protection [59].”
BackgroundFlame-retardant textile nanofinishes
Montazer, M., & Harifi, T. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101214-7.00011-x · Cited by 3 · cited 8×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialMontazer, M., & Harifi, T. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101214-7.00003-0 · Cited by 2
Montazer, M., & Harifi, T. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101214-7.00004-2 · Cited by 1
Chakraborty, J. N. (2010) · Elsevier eBooks · doi:10.1533/9780857092823.151 · Cited by 1
Research works printed but not linked: 2
- Clark, 2011, Metal-complex dyes, Handbook of Textile and Industrial Dyeing: Principles, Processes and Types of Dyes, Volume 1, 446
- Sharma, S.K. (2021). Chapter 5—Removal of dyes and pigments from industrial effluents. Green Chemistry and Water Remediation: Research and Applications, Elsevier.
Cited by
Highly Specialized Textiles with Antimicrobial Functionality—Advances and Challenges
Tanasă, F., Teacă, C., Nechifor, M., Ignat, M.-E., Duceac, I. A., & Ignat, L. (2023) · Textiles · doi:10.3390/textiles3020015 · Cited by 66
“It must be mentioned that a high number of heavy metal species, including copper, zinc, and titanium salts and complexes, could be present in traces to sizeable amounts within the unmodified textile materials, originating from raw materials and processing, but especially from the dyeing steps, which may interfere with…”
BackgroundSustainable management of post-phytoremediation biomass
Mukherjee, S., Leri, A. C., Bandaranayaka, C., Vázquez-Núñez, E., Barros, R., Khan, A. H. A., Zhou, P., Zhang, T., Bernal, M. P., Clemente, R., et al. (2025) · Energy, Ecology and Environment · doi:10.1007/s40974-025-00364-w · Cited by 45
“It sets the permissible limit for As, Cd, Cr (VI), and Pb (and their compounds) in fabric material to not exceed 1 mg metal(loid) kg - 1 fabric (Rujido-Santos et al. 2022).”
Desai, A. S., Singh, A., Edis, Z., Bloukh, S. H., Shah, P., Pandey, B., Agrawal, N., & Bhagat, N. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13020054 · Cited by 44
Zuo, C., Li, Y., Chen, Y., Jiang, J., Qiu, W., & Chen, Q. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132639 · Cited by 42
Tampons as a source of exposure to metal(loid)s
Shearston, J. A., Upson, K., Gordon, M., Do, V., Balac, O., Nguyen, K. N., Yan, B., Kioumourtzoglou, M., & Schilling, K. (2024) · Environment International · doi:10.1016/j.envint.2024.108849 · Cited by 38
Metadata
- Authors
- Rujido-Santos, I., Herbello-Hermelo, P., Barciela-Alonso, M. C., Bermejo-Barrera, P., & Moreda-Piñeiro, A.
- Affiliations
- Universidade de Santiago de Compostela (ES)
- The Group of Trace Element, Spectroscopy, and Speciation (GETEE), Institute of Materials iMATUS, Department of Analytical Chemistry, Nutrition, and Bromatology, Faculty of Chemistry, Universidade de Santiago de Compostela, Avenida das Ciencias, s/n, 15782 Santiago de Compostela, Spain
- Venue
- International Journal of Environmental Research and Public Health
- Publisher
- MDPI AG
- Published
- 2022-01-15
- Volume
- 19
- Issue
- 2
- Pages
- 944
- ISSN
- 1660-4601 (ISSN-L)
- PMC
- PMC8775849
- OpenAlex
- W4206000274
- Cited by
- 53
- References
- 55
- Citations by year
- 2026: 11 · 2025: 12 · 2024: 17 · 2023: 9 · 2022: 4
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- International Journal of Environmental Research and Public Health (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Consellería de Eduación e Ordenación Universitaria, Xunta de Galicia (ED431C2018/19)
- Ministerio de Economia y Competitividad, Gobierno de España (INNOVANANO RT2018-099222-B-100)
- Topics
- Physical Sciences › Chemistry › Analytical Chemistry › Analytical chemistry methods development
- Physical Sciences › Environmental Science › Water Science and Technology › Environmental and Analytical Chemistry Studies
- Physical Sciences › Environmental Science › Pollution › Heavy metals in environment
- Keywords
- metal nanoparticles, heavy metals, lead, cadmium, hexavalent chromium, arsenic, mercury, regulatory compliance
- MeSH terms
- Arsenic, Cadmium, Mercury, Metals, Textiles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.