CoChat

Ammonia Synthesis over Transition Metal Catalysts: Reaction Mechanisms, Rate-Determining Steps, and Challenges

Open access
Varadwaj, Pradeep R., Marques, Helder M., Grabowski, Ireneusz · 2025 · International Journal of Molecular Sciences

The DOI matches its Crossref record; 286 of the 286 references it cites were found in a registry or an index; none of the 49 sources its claims cite is checked for support yet.

Abstract

Ammonia synthesis remains a cornerstone of global chemical manufacturing, essential for fertilizer production, energy storage, and emerging carbon capture technologies. This overview examines recent developments in the understanding of elementary reaction mechanisms in heterogeneous catalysis, with emphasis on transition metal thermocatalysts operating under the Haber–Bosch process. Traditionally, the dissociative adsorption of nitrogen (N2) has been considered the rate-determining step. However, recent studies challenge this view, revealing possible shifts in rate-determining steps and suggesting that alternative mechanistic pathways may be operative. The discussion critiques studies that adhere strictly to the classic dissociative mechanism—often inferred from the reaction order of N2—while overlooking alternative pathways that could offer more efficient catalytic routes and deeper mechanistic insight into ammonia synthesis. These insights offer a pathway toward more rational catalyst design and improved process efficiency in ammonia synthesis.

Overview

CoChat Summary

TL;DR

This review surveys mechanisms, rate-determining steps, and challenges in ammonia synthesis over transition-metal catalysts, emphasizing that the classic N₂ dissociative RDS can shift with catalyst composition, promoters, and reaction conditions. It compiles reported activation energies and mechanistic pathways—dissociative LH, associative LR/ER, MvK, alternating, distal, and enzymatic analogues—and calls for more comprehensive, catalyst-specific mechanistic studies.

Key findings

  • The traditional N₂ → 2N rate-determining step is challenged: for many Ru-based catalysts N₂ dissociation remains rate-limiting with near-unity α, but in Ru-loaded electrides the RDS shifts to hydrogenation, lowering apparent activation energy to 0.45–0.65 eV and giving α(N₂) values such as 0.46 for Ru/C12A7:e⁻ and 0.53 for Ru/Ca(NH₂)₂.
  • Table 1 reports apparent activation energies across catalysts, including Ru 0.881–1.254 eV, commercial Fe 0.725 eV, Co₃Mo₃N 0.58 eV, Ru/CaFH 0.207 eV, and Ru/Ba–Ca(NH₂)₂ 0.425–0.611 eV.
  • Active-site geometry matters: B5 sites occur on Ru/Co step edges and C7 sites on Fe surfaces; for eight Fe surfaces, C7-exposing facets (111), (221), (311), and (211) showed activation energies of −0.35 to −0.45 eV, while (210) and (310) showed −0.16 to −0.14 eV and (100)/(110) showed 0.10 and 0.26 eV.
  • Promoters can strongly enhance rates: anchoring Ba and/or Ce onto Ru atomic cluster catalysts boosted NH₃ synthesis to 56.2 mmol NH₃ g_at⁻¹ h⁻¹ at 400 °C and 1 MPa, 7.5 times higher than Ru ACC alone; RuCo dual single-atom catalysts gave NH₃ synthesis rates 8.2× and 7.5× higher than Co SAC and Ru SAC, respectively, at 400 °C.
  • The associative mechanism is said to predominate over the dissociative one when molecular N₂ adsorption strength exceeds a critical threshold around −1.0 eV, with hybrid associative–dissociative pathways likely in vacancy-assisted systems.

Methods

  • Design: narrative overview/review of recent developments in heterogeneous catalysis mechanisms for Haber–Bosch ammonia synthesis over transition-metal thermocatalysts.
  • Data/sample: published experimental and theoretical studies on Fe, Co, Mo, Ru, transition-metal alloys, nitrides, hydrides, and electrides; no new primary sample or dataset is reported.
  • Main analysis: comparative synthesis of elementary reaction mechanisms, rate-determining steps, reaction orders, and activation energies; Table 1 compiles catalysts, RDS, mechanism type, and apparent activation energies, and the text discusses DFT, NEB, and CI-NEB approaches.

Limitations

  • The paper states that a complete mechanistic understanding of activation profiles and their relationship to the RDS remains elusive; that there is no singular, universally applicable rule for identifying active sites; that the relationship between RDS and reaction order remains incompletely understood; and that mechanistic exploration remains confined to a limited set of catalyst systems.
  • Evident from the text: as a review, it presents no new experimental data; Table 1 contains many blank entries for RDS, mechanism, or activation energy; and several mechanistic assignments are inferred from reaction orders or DFT, with some cited conclusions described as based on assumptions rather than thorough examination.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/ijms26104670

Cites

286 of 286 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 11 The Lowe–Thorneley mechanism of nitrogenase (adapted from [262,263,272]), emphasizing the coupled transfer of electrons and protons across eight steps. While the complete model indicates that N2 binds at either the E3 or E4 stages, this representation focuses less on the pathway through E3. Additionally, the model includes protons that are associated with the FeMo cofactor.
Figure 11 The Lowe–Thorneley mechanism of nitrogenase (adapted from [262,263,272]), emphasizing the coupled transfer of electrons and protons across eight steps. While the complete model indicates that N2 binds at either the E3 or E4 stages, this representation focuses less on the pathway through E3. Additionally, the model includes protons that are associated with the FeMo cofactor.CC BY · PubMed Central
Figure 1 (a,b) Illustration (top view) of common adsorption sites on the flat/step HCP(0001) surface of Ru (space group: P63/mmc), including on-top (directly above a surface atom), bridge (between two adjacent atoms), face-centered cubic (fcc) hollow, and hexagonal close-packed (hcp) hollow sites. The fcc site is a threefold hollow site where the adsorbate sits above a triangle of atoms stacked in an fcc-like sequence, typically found on (111) surfaces of fcc metals. The hcp site is also a threefold hollow, but lies above atoms following an hcp stacking, characteristic of hcp metals like Ru. (b) Manual construction of a monoatomic step surface on Ru(0001) by selectively removing two rows of atoms from the top layer; this approach does not involve the use of a Wulff construction. (b,c) The B5 site is a step-edge site on a stepped Ru surface, composed of five metal atoms—two from the step and three from the terrace—within an hcp lattice. This site is well-known for its catalytic role in ammonia synthesis. (c) Marking of the B5 and B6 sites on a step surface of HCP Ru; the slab is shown from two different perspectives. (d) Schematic illustrations of different adsorption modes of molecular N2 on various surface sites of Ru. Illustrations of the B5, C7, and B6 adsorption sites on the (311), (111), and (210) surfaces of FCC Co and BCC Fe are shown in panels (e), (f), and (g), respectively. Atom colors: Ru—pink; Co—deep cyan; Fe—deep orange; N—light blue.
Figure 1 (a,b) Illustration (top view) of common adsorption sites on the flat/step HCP(0001) surface of Ru (space group: P63/mmc), including on-top (directly above a surface atom), bridge (between two adjacent atoms), face-centered cubic (fcc) hollow, and hexagonal close-packed (hcp) hollow sites. The fcc site is a threefold hollow site where the adsorbate sits above a triangle of atoms stacked in an fcc-like sequence, typically found on (111) surfaces of fcc metals. The hcp site is also a threefold hollow, but lies above atoms following an hcp stacking, characteristic of hcp metals like Ru. (b) Manual construction of a monoatomic step surface on Ru(0001) by selectively removing two rows of atoms from the top layer; this approach does not involve the use of a Wulff construction. (b,c) The B5 site is a step-edge site on a stepped Ru surface, composed of five metal atoms—two from the step and three from the terrace—within an hcp lattice. This site is well-known for its catalytic role in ammonia synthesis. (c) Marking of the B5 and B6 sites on a step surface of HCP Ru; the slab is shown from two different perspectives. (d) Schematic illustrations of different adsorption modes of molecular N2 on various surface sites of Ru. Illustrations of the B5, C7, and B6 adsorption sites on the (311), (111), and (210) surfaces of FCC Co and BCC Fe are shown in panels (e), (f), and (g), respectively. Atom colors: Ru—pink; Co—deep cyan; Fe—deep orange; N—light blue.CC BY · PubMed Central
Figure 2 (a–f) Schematic representation of the energy of activation as a function of reaction coordinate. TS and TS1 are transition states, ΔH is the reaction enthalpy, and Ea and Ea’ are the activation energies. The label at ‘0’ energy corresponds to the reference point. The peaks representing Ea correspond to the actual transition states.
Figure 2 (a–f) Schematic representation of the energy of activation as a function of reaction coordinate. TS and TS1 are transition states, ΔH is the reaction enthalpy, and Ea and Ea’ are the activation energies. The label at ‘0’ energy corresponds to the reference point. The peaks representing Ea correspond to the actual transition states.CC BY · PubMed Central
Figure 3 A schematic illustration of the possible dissociative pairs likely involved in the entire nitrogen reduction reaction (NRR) pathway on heterogeneous transition metal catalysts. These intermediates are central to NRR for Haber–Bosch catalysts and are likely to be relevant for photocatalytic and electrocatalytic processes [171].
Figure 3 A schematic illustration of the possible dissociative pairs likely involved in the entire nitrogen reduction reaction (NRR) pathway on heterogeneous transition metal catalysts. These intermediates are central to NRR for Haber–Bosch catalysts and are likely to be relevant for photocatalytic and electrocatalytic processes [171].CC BY · PubMed Central
Figure 4 (a) Schematic representation of the widely used volcano plot illustrating the limitations of transition metal catalysts in ammonia synthesis. ΔG refers to the Gibbs free energy. Shown in (b) is the representation of the Brønsted–Evans–Polanyi (BEP) relationship (see text for description).
Figure 4 (a) Schematic representation of the widely used volcano plot illustrating the limitations of transition metal catalysts in ammonia synthesis. ΔG refers to the Gibbs free energy. Shown in (b) is the representation of the Brønsted–Evans–Polanyi (BEP) relationship (see text for description).CC BY · PubMed Central
Figure 5 (a–n) Schematic representation of the Langmuir–Hinshelwood (LH) (dissociative) mechanism for ammonia synthesis. The elementary reaction is [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), where M in [M] represents the active site on the clean catalyst [] and (g) denotes the gas phase species.
Figure 5 (a–n) Schematic representation of the Langmuir–Hinshelwood (LH) (dissociative) mechanism for ammonia synthesis. The elementary reaction is [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), where M in [M] represents the active site on the clean catalyst [] and (g) denotes the gas phase species.CC BY · PubMed Central
Figure 6 Schematic representation of the (a–k) (associative) Eley–Rideal (ER) (left) and (a’–k’) Langmuir–Rideal (LR) (right) mechanisms for ammonia synthesis. The elementary reaction, [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), is shown, where M in [M] represents the active site on the clean catalyst []. Two possible adsorption modes of molecular N2 on the catalyst are depicted, facilitating direct chemical reactions between chemisorbed N2 and physisorbed (or gas-phase) H2 molecules via a non-dissociative mechanism, leading to the formation of intermediate and product species along the ER and LR pathways, respectively. In both cases, the N2 molecule may be adsorbed in either an end-on or side-on orientation. Interaction modes between the reactants are illustrated in (f′,g′), each showing the varied nature of plausible intermediate species.
Figure 6 Schematic representation of the (a–k) (associative) Eley–Rideal (ER) (left) and (a’–k’) Langmuir–Rideal (LR) (right) mechanisms for ammonia synthesis. The elementary reaction, [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), is shown, where M in [M] represents the active site on the clean catalyst []. Two possible adsorption modes of molecular N2 on the catalyst are depicted, facilitating direct chemical reactions between chemisorbed N2 and physisorbed (or gas-phase) H2 molecules via a non-dissociative mechanism, leading to the formation of intermediate and product species along the ER and LR pathways, respectively. In both cases, the N2 molecule may be adsorbed in either an end-on or side-on orientation. Interaction modes between the reactants are illustrated in (f′,g′), each showing the varied nature of plausible intermediate species.CC BY · PubMed Central
Figure 7 (a–m) Schematic representation of the associative Mars–van Krevelen (MvK) mechanism for ammonia synthesis, following a (distal-type) consecutive pathway for hydrogenation. The elementary reaction is as follows: [•] + N2(g) + 3H2(g) → [•] + 2NH3(g), where [•] represents the vacancy site on the clean catalyst. Two possible modes of adsorption of N2 are shown: (left) end-on; (right) (side-on tilted).
Figure 7 (a–m) Schematic representation of the associative Mars–van Krevelen (MvK) mechanism for ammonia synthesis, following a (distal-type) consecutive pathway for hydrogenation. The elementary reaction is as follows: [•] + N2(g) + 3H2(g) → [•] + 2NH3(g), where [•] represents the vacancy site on the clean catalyst. Two possible modes of adsorption of N2 are shown: (left) end-on; (right) (side-on tilted).CC BY · PubMed Central
Figure 8 (a–m) Schematic representation of the associative alternating (symmetric) pathway for ammonia synthesis. The elementary reaction is as follows: [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), where M in [M] represents the active site on the clean catalyst [] (e.g., Ca3CrN3H [108]).
Figure 8 (a–m) Schematic representation of the associative alternating (symmetric) pathway for ammonia synthesis. The elementary reaction is as follows: [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), where M in [M] represents the active site on the clean catalyst [] (e.g., Ca3CrN3H [108]).CC BY · PubMed Central
Figure 9 (a–m) Schematic representation of the associative (asymmetric) distal pathway (ADP) mechanism for ammonia synthesis. The elementary reaction is as follows: [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), where M in [M] represents the active site in the clean catalyst [] and (g) denotes the gas phase species. Shown in (a′–j′) is the distal pathway similar to that utilized in the study of Qui et al. [107], including the following reactant, intermediate and product steps: (a′) [M] + N2(g) + 3H2(g); (b′) [M-N2] + 3H2(g); (c′) [M-N2 H2] + 2H2(g); (d′) [M-N-NH2] + 2H2(g); (e′) [M-N-NH2 H2] + H2(g); (f′) [M-NH∙∙∙NH3] + H2(g); (g′) [M-NH] + NH3(g) + H2(g); (h′) [M-NH H2] + NH3(g); (i′) [M-NH3] + NH3(g); (j′) [M] + 2NH3(g). In each step of the reaction, (a′–j′), the total number of hydrogen and nitrogen moieties is conserved, although this stoichiometric balance is not explicitly depicted in the schematic.
Figure 9 (a–m) Schematic representation of the associative (asymmetric) distal pathway (ADP) mechanism for ammonia synthesis. The elementary reaction is as follows: [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), where M in [M] represents the active site in the clean catalyst [] and (g) denotes the gas phase species. Shown in (a′–j′) is the distal pathway similar to that utilized in the study of Qui et al. [107], including the following reactant, intermediate and product steps: (a′) [M] + N2(g) + 3H2(g); (b′) [M-N2] + 3H2(g); (c′) [M-N2 H2] + 2H2(g); (d′) [M-N-NH2] + 2H2(g); (e′) [M-N-NH2 H2] + H2(g); (f′) [M-NH∙∙∙NH3] + H2(g); (g′) [M-NH] + NH3(g) + H2(g); (h′) [M-NH H2] + NH3(g); (i′) [M-NH3] + NH3(g); (j′) [M] + 2NH3(g). In each step of the reaction, (a′–j′), the total number of hydrogen and nitrogen moieties is conserved, although this stoichiometric balance is not explicitly depicted in the schematic.CC BY · PubMed Central
Figure 10 (a–m) Schematic representation of the enzymatic reaction pathway (AERP) for ammonia synthesis. The elementary reaction is as follows: [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), where [M] represents the clean catalyst and (g) denotes the gas phase species.
Figure 10 (a–m) Schematic representation of the enzymatic reaction pathway (AERP) for ammonia synthesis. The elementary reaction is as follows: [M] + N2(g) + 3H2(g) → [M] + 2NH3(g), where [M] represents the clean catalyst and (g) denotes the gas phase species.CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 0 Not valid · 24 Not checked · 4 Own results and interpretations

    49 references still to check

    A free account verifies the references that are still open.

    Verify all 49 references — free account
    • It may state two separate claims as one. 27
    • The quote only partly states this claim. 2
    • Probably not a substantial claim. 3

    Create a free account to see these claims.

    Self-check

    Percentages, sums and reported differences re-computed from the paper’s own numbers.

    Each contradiction between two passages listed here was confirmed by an independent check.

    5 of 7 · the rest aren’t loaded

    2 more findings

    Create a free account to see every finding of this check.

    See all findings — free account

    Citations

    Cites

    Research works printed but not linked: 4

    1. Appl, M. (1997, January 25–26). The Haber-Bosch Heritage: The Ammonia Production Technology. Proceedings of the 50th Anniversary of the IFA Technical Conference, Seville, Spain.
    2. Hinshelwood, S.C.N. (1926). The Kinetics of Chemical Change in Gaseous Systems, Clarendon Press.
    3. Bligaard, 2011, A Theoretical Evaluation of Possible Transition Metal Electro-Catalysts for N2 Reduction, Phys. Chem. Chem. Phys., 14, 1235
    4. Spiro, 1985, Kinetics and Mechanism of the Nitrogenase Enzyme System, Metal Ions in Biology: Molybdenum Enzymes, Volume 7, 221

    Cited by

    See all 24

    Metadata

    Authors
    Varadwaj, P. R., Marques, H. M., & Grabowski, I.
    Affiliations
    • University of the Witwatersrand (ZA)
    • Nicolaus Copernicus University (PL)
    Corresponding author
    Varadwaj, Pradeep R.
    Venue
    International Journal of Molecular Sciences
    Publisher
    MDPI AG
    Published
    2025-05-13
    Volume
    26
    Issue
    10
    Pages
    4670
    ISSN
    1422-0067 (ISSN-L)
    OpenAlex
    W4410346046
    Cited by
    24
    References
    282
    Citations by year
    2026: 17 · 2025: 7
    FWCI
    1.13
    Type
    journal article
    Language
    en
    Open access
    Locations
    • International Journal of Molecular Sciences (publishedVersion, cc-by)
    • PubMed Central (publishedVersion, cc-by)
    • Europe PMC (PubMed Central) (publishedVersion, cc-by)
    • PubMed (publishedVersion)
    Topics
    • Physical Sciences › Chemical Engineering › Catalysis › Ammonia Synthesis and Nitrogen Reduction
    • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
    • Physical Sciences › Chemistry › Organic Chemistry › Organometallic Complex Synthesis and Catalysis
    Keywords
    ammonia synthesis, Haber-Bosch process, transition metal catalysts, heterogeneous catalysis, reaction mechanism, rate-determining step, reaction order, catalyst design
    MeSH terms
    Ammonia, Catalysis, Nitrogen, Transition Elements

    About these checks

    Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

    A language model drew the claims from the paper on 2026-11-20, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

    A second model labelled each claim on 2026-11-20 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

    Statistics and arithmetic are recomputed, not judged.

    Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

    What counts as a claim ›How we measure confidence ›How we check this ›

    Are you an author, or do you see a problem with this page? Request a review

    Data sources

    Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

    Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

    Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.