The DOI matches its Crossref record; 65 of the 73 references it cites were found in a registry or an index, and 1 are not checked yet; 25 of the 77 sources its claims cite were checked for support.
A Survey and Tutorial on Image Quality Assessment with a Contrast-Weighted Structural Similarity Framework
Open accessAbstract
Objective IQA has advanced significantly through full-reference metrics designed to approximate human judgment. Standard measures such as PSNR, SSIM, and RMSE provide established benchmarks.
Verified 2026-10-06 · 1 reference not checked yet
Overview
CoChat Summary
TL;DR
This survey/tutorial reviews full-reference and no-reference image quality assessment and introduces ACSSIM, a lightweight contrast-weighted extension of classical FR-IQA using local Weber-law contrast and entropy weighting. On TID2013 and KADID-10k, ACSSIM improves correlation with MOS over SSIM but remains below stronger learned and multi-scale FR-IQA methods.
Key findings
- ACSSIM improves over SSIM on TID2013 (PLCC 0.6995 vs 0.6558; SRCC 0.6709 vs 0.6269) and KADID-10k (PLCC 0.5984 vs 0.5755; SRCC 0.6778 vs 0.6188).
- Distortion-wise SRCC on TID2013 shows strongest gains for contrast change (+0.1044 SRCC over SSIM) and quantization noise (+0.0850 SRCC), with positive gains for sparse sampling/reconstruction, JPEG/JPEG2000-related distortions, and multiplicative Gaussian noise; decreases occur for local block-wise distortions, impulse noise, additive noise in color components, and mean shift.
- In a controlled cat-image experiment with approximately equal MSE distortions, MSE and PSNR produced nearly identical values across distortions, SSIM’s lowest score was for the noisy image, while ACSSIM gave a more consistent ordering; ACSSIM distortion scores increased from 0.0281 to 0.4312 across the five distorted versions.
- Preliminary contrast-measure examples report, for thermal panel “dji-0769.jpg,” EME values of 2.98 (original), 9.00 (histogram equalization), 11.48 (0.80-rooting), and 11.66 (0.75-rooting), with the 0.75-rooting image highest across all eight listed measurements.
Methods
- Design: a survey and tutorial providing self-contained mathematical derivations of classical error-sensitivity measures (MSE, RMSE, MAE, Euclidean distance, RMSLE, Huber loss) and ANN approaches, plus a taxonomy of pixel-based, histogram-based, feature-based, and deep-learning similarity methods.
- ACSSIM: decomposes reference and distorted images into non-overlapping blocks of L1×L2 pixels (L1, L2 = 3, 5, 8, or 16); computes local contrast terms using AC = AC5 or AMEE; computes local similarity via SSIM or MSE; and averages local similarity responses with normalized contrast-adaptive weights.
- Evaluation: TID2013 (25 reference images, 3000 distorted images, 24 distortion types) and KADID-10k (81 reference images, 10,125 distorted images, 25 distortion types, five degradation levels), using PLCC and SRCC via the pyiqa toolbox; a controlled experiment used synthetically generated distortions on a single reference image with approximately equal MSE.
Limitations
- Stated in paper: parameter sensitivity (weighting constants for contrast and entropy; sub-optimal tuning may cause over-masking in high-texture regions); block-size dependency (too small makes entropy statistically insignificant, too large loses local HVS masking); and sensitivity to uniform global luminance shifts.
- Stated in paper: ACSSIM does not outperform stronger FR-IQA methods such as MS-SSIM, FSIM, GMSD, PieAPP, and TOPIQ-FR; its value is simplicity and interpretability. Distortion-wise improvement is not uniform, with decreases for local block-wise distortions, impulse noise, additive noise in color components, and mean shift; the current grayscale formulation is less effective for highly localized, color-component-dependent, or globally uniform distortions.
- Evident from text: the survey notes that entropy ignores spatial relationships between pixels, and that EMEE focuses only on local features and may miss broader image characteristics, though ACSSIM uses local entropy/contrast weighting.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
10 Valid · 9 Not valid · 13 Not checked · 100 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Diagnostic Imaging : EMEE components detect subtle tissue variations and small anatomical structures; GIA ensures that contrast and brightness levels remain clinically relevant; combined metrics assist in the early detection of pathological changes; and applications include mammography, CT scan analysis, and MRI quality assessment.”
What the sources say
- Partly supportedcites [51] Beghdadi, 2020, A critical analysis on perceptual contrast and its use in visual information analysis and processing, IEEE Access sourceExperimental — accuracy not yet measured
The Image Quality Assessment section discusses contrast-based MRI quality assessment, and the image-enhancement discussion mentions a contrast-based method for mammography. Neither passage identifies these as combined EMEE and GIA metrics; the copy also does not establish their claimed diagnostic roles, early detection benefit, or use in CT analysis (no page numbers provided). (LLM, conf=0.82)
- Could not verifycites [52] Zhuang, 2022, An effective WSSENet-based similarity retrieval method of large lung CT image databases, KSII Trans. Internet Inf. Syst. (TIIS) sourceExperimental — accuracy not yet measured
The Introduction and §5.4 discuss lung CT similarity retrieval and its possible diagnostic use, not EMEE or GIA. Searches for those metrics and for contrast, brightness, mammography, and MRI quality assessment found no passage evaluating the claimed combination or its applications. (LLM, conf=0.76)
- Not checked — no full text of the sourcecites [53] Agaian, 2025, A new method for judging thermal image quality with applications, Signal Process. source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Traditional full-reference metrics often rely on pixel-wise or structural differences that do not always align with human visual perception, particularly when images contain multiple distortion types, local contrast changes, or domain-specific degradation patterns.”
What the sources say
- Could not verifycites [54] Pinson, 2023, Why no-reference metrics for image and video quality lack accuracy and reproducibility, IEEE Trans. Broadcast. sourceExperimental — accuracy not yet measured
The paper's “Ideal Dataset for NR Metric Research” section says transmission errors are challenging for full-reference metrics, but it does not connect that difficulty to pixel-wise or structural comparisons failing to match human perception. Searches for those terms and for the specified distortion types found discussion chiefly of no-reference metrics, not the claimed limitations of traditional full-reference metrics. Page numbers were unavailable in our copy. (LLM, conf=0.73)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Our results confirm that ACSSIM maintains low computational overhead, bridging the gap between efficiency and accuracy for practical deployment.”
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Extensive numerical experiments on the TID2013 and KADID-10k benchmark show that ACSSIM improves correlation with human subjective judgments compared with the baseline PSNR and SSIM.”
- Also stated in: § B. The ACSSIM Framework: A Conceptual Preview · boosted
“Empirical Validation: Rigorous testing on the TID2013 and KADID-10k benchmarks shows that ACSSIM greatly surpasses standard SSIM in matching human subjective scores.”
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § B. The ACSSIM Framework: A Conceptual Preview · boosted
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“and EME ( X 3 ) = 11.66”
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
52 more claims
Create a free account to see all 132 claims and every source verdict.
- It may state two separate claims as one. 36
- Probably not a substantial claim. 54
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.2. Root Mean Squared Error
“The images of 0.70- and 0.76-rooting are given in parts (c) and (d), respectively.”
§ 2.2. Root Mean Squared Error
“According to these metrics, the greatest similarity is observed between two images which are processed by using the 0.70-rooting and the histogram equalization method, that is, X 3 and X 1 .”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 5.1. Preliminary Experimental Results
“The image of the 0.89-rooting enhancement is shown in part (c). The method of 0.79-rooting on the negative image is shown in part (d);”
§ 5.1. Preliminary Experimental Results
“Figure 16. ( a ) The original image 'Goldhill512.bmp' 512 × 512, ( b ) the histogram equalization, and the images enhanced by ( c ) the 0.85-rooting and ( d ) the negative 0.85-rooting.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3. The Euclidean and Chebyshev Distances
“This function does not satisfy the triangle inequality in Definition 7 and is, therefore, not a distance.”
§ 3. The Euclidean and Chebyshev Distances
“Definition 8. A metric space is a set X and a single-valued non-negative function d ( x , y ) which is called a distance and satisfies the following conditions:”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.2. Root Mean Squared Error
“Figure 6 shows the original grayscale image of the flower, X , of size 3024 × 2268 pixels in part (a).”
§ 2.2. Root Mean Squared Error
“Figure 6. ( a ) The original 'pirate' image, ( b ) the smooth image, ( c ) and ( d ) two threshold images, and ( e ) the binary image.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Agaian and Panetta Contrast Measures, AMEE
“The histogram equalization of the image is shown in part (b).”
§ Agaian and Panetta Contrast Measures, AMEE
“Figure 20. ( a ) The original image 750 × 440, ( b ) the smooth image, ( c ) the histogram equalization, and the images enhanced by ( c ) 0.74-rooting and ( d ) 0.84-rooting.”
1 more finding
Create a free account to see every finding of this check.
Citations
Cites
A Mathematical Theory of Communication
Shannon, C. E. (1948) · Bell System Technical Journal · doi:10.1002/j.1538-7305.1948.tb01338.x · Cited by 88,486
Image quality assessment: from error visibility to structural similarity
Wang, Z., Bovik, A. C., Sheikh, H. R., & Simoncelli, E. P. (2004) · IEEE Transactions on Image Processing · doi:10.1109/tip.2003.819861 · Cited by 57,892
Distinctive Image Features from Scale-Invariant Keypoints
Lowe, D. G. (2004) · International Journal of Computer Vision · doi:10.1023/b:visi.0000029664.99615.94 · Cited by 55,589
Histograms of Oriented Gradients for Human Detection
Dalal, N., & Triggs, B. (2005) · 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05) · doi:10.1109/cvpr.2005.177 · Cited by 33,584
The Unreasonable Effectiveness of Deep Features as a Perceptual Metric
Zhang, R., Isola, P., Efros, A. A., Shechtman, E., & Wang, O. (2018) · 2018 IEEE/CVF Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2018.00068 · Cited by 14,623
Speeded-Up Robust Features (SURF)
Bay, H., Ess, A., Tuytelaars, T., & Van Gool, L. (2008) · Computer Vision and Image Understanding · doi:10.1016/j.cviu.2007.09.014 · Cited by 13,557
Modeling the Shape of the Scene: A Holistic Representation of the Spatial Envelope
Oliva, A., & Torralba, A. (2001) · International Journal of Computer Vision · doi:10.1023/a:1011139631724 · Cited by 6,319
Multiscale structural similarity for image quality assessment
Wang, Z., Simoncelli, E. P., & Bovik, A. C. (2004) · The Thrity-Seventh Asilomar Conference on Signals, Systems & Computers, 2003 · doi:10.1109/acssc.2003.1292216 · Cited by 6,253
A universal image quality index
Wang, Z., & Bovik, A. C. (2002) · IEEE Signal Processing Letters · doi:10.1109/97.995823 · Cited by 5,757
FSIM: A Feature Similarity Index for Image Quality Assessment
Zhang, L., Zhang, L., Mou, X., & Zhang, D. (2011) · IEEE Transactions on Image Processing · doi:10.1109/tip.2011.2109730 · Cited by 5,203
Metadata
- Authors
- Agaian, S. S., Grigoryan, A. M., & Ayunts, H.
- Affiliations
- Department of Computer Science, School of Engineering, City University of New York (CUNY), New York, NY 10031, USA
- The University of Texas at San Antonio (US)
- Yerevan State University (AM)
- Corresponding author
- Grigoryan, Artyom M.
- Venue
- Information
- Publisher
- MDPI AG
- Published
- 2026-06-27
- Volume
- 17
- Issue
- 7
- Pages
- 632
- ISSN
- 2078-2489 (ISSN-L)
- OpenAlex
- W7166583081
- Cited by
- 0
- References
- 72
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Information (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Image and Video Quality Assessment
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Image Retrieval and Classification Techniques
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Digital Media Forensic Detection
- Keywords
- image quality assessment, full-reference quality metrics, structural similarity index, human visual system, Weber's law, entropy weight method, perceptual image quality, TID2013, PSNR, LPIPS
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-06, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-06 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Survey and Tutorial on Image Quality Assessment with a Contrast-Weighted Structural Similarity Framework. https://app.cochat.ai/papers/10.3390/info17070632
- The paper
- Agaian, S. S., Grigoryan, A. M., & Ayunts, H. (2026). A Survey and Tutorial on Image Quality Assessment with a Contrast-Weighted Structural Similarity Framework. Information. https://doi.org/10.3390/info17070632
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.