The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Natural Fibre Composites and Their Applications: A Review
Open accessAbstract
There is significant work published in recent years about natural fibres polymeric composites. Most of the studies are about the characterization of natural fibres and their comparison with conventional composites regarding mechanical behaviour and application performance. There are dozens of types of natural fibres with different properties influencing their use, or not, in specific industrial applications. The natural origin of these materials causes, in general, a wide range of variations in properties depending mainly on the harvesting location and conditions, making it difficult to select the appropriate fibre for a specific application. In this paper, a comprehensive review about the properties of natural fibres used as composite materials reinforcement is presented, aiming to map where each type of fibre is positioned in several properties. Recent published work on emergent types of fibres is also reviewed. A bibliometric study regarding applications of natural fibres composites is presented. A prospective analysis about the future trends of natural fibres applications and the required developments to broaden their applications is also presented and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Fiber-Reinforced Composites: Materials, Manufacturing, and Design, Third Edition
Mallick, P. K. (2007) · CRC Press eBooks · doi:10.1201/9781420005981 · Cited by 1,634
Natural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Flax fibre and its composites – A review
Yan, L., Chouw, N., & Jayaraman, K. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.08.014 · Cited by 1,454
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
Sisal fibre and its composites: a review of recent developments
Li, Y., Mai, Y.-W., & Ye, L. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00101-9 · Cited by 1,212
Green composites: A review of adequate materials for automotive applications
Koronis, G., Silva, A., & Fontul, M. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.004 · Cited by 1,198
Green composites: A brief review
La Mantia, F. P., & Morreale, M. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.01.017 · Cited by 1,125
Bamboo fibre reinforced biocomposites: A review
Abdul Khalil, H. P. S., Bhat, I. U. H., Jawaid, M., Zaidon, A., Hermawan, D., & Hadi, Y. S. (2012) · Materials & Design · doi:10.1016/j.matdes.2012.06.015 · Cited by 835
AL-Oqla, F. M., & Sapuan, S. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.050 · Cited by 782
Natural fibre-reinforced composites for bioengineering and environmental engineering applications
Cheung, H.-Y., Ho, M.-P., Lau, K.-T., Cardona, F., & Hui, D. (2009) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.04.014 · Cited by 769
Plant fibre based bio-composites: Sustainable and renewable green materials
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.094 · Cited by 764
Satyanarayana, K. G., Guimarães, J. L., & Wypych, F. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.02.006 · Cited by 693
Critical factors on manufacturing processes of natural fibre composites
Ho, M.-P., Wang, H., Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J., & Hui, D. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.10.001 · Cited by 663
Green composites: a review of material attributes and complementary applications
Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
A review on new bio-based constituents for natural fiber-polymer composites
Väisänen, T., Das, O., & Tomppo, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.132 · Cited by 560
Biagiotti, J., Puglia, D., & Kenny, J. M. (2004) · Journal of Natural Fibers · doi:10.1300/j395v01n02_04 · Cited by 412
Puglia, D., Biagiotti, J., & Kenny, J. M. (2005) · Journal of Natural Fibers · doi:10.1300/j395v01n03_03 · Cited by 390
Effect of fiber treatment on flexural properties of natural fiber reinforced composites: A review
Sood, M., & Dwivedi, G. (2018) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2017.11.005 · Cited by 384
A review of bast fibres and their composites. Part 2 – Composites
Summerscales, J., Dissanayake, N., Virk, A., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.020 · Cited by 274
Applications of biocomposite materials based on natural fibers from renewable resources: a review
Bharath, K. N., & Basavarajappa, S. (2015) · Science and Engineering of Composite Materials · doi:10.1515/secm-2014-0088 · Cited by 237
Franck, R. R. (2005) · doi:10.1533/9781845690618 · Cited by 220
Environment Friendly Composite Materials: Biocomposites and Green Composites
Mitra, B. (2014) · Defence Science Journal · doi:10.14429/dsj.64.7323 · Cited by 205
Biotechnology of Lignocellulose: Theory and Practice
Chen, H. (2014) · Thammasat University Digital Collections · doi:10.1007/978-94-007-6898-7 · Cited by 172
Natural-fiber composites in the automotive sector
HUDA, M. S., DRZAL, L. T., RAY, D., MOHANTY, A. K., & MISHRA, M. (2008) · Properties and Performance of Natural-Fibre Composites · doi:10.1533/9781845694593.2.221 · Cited by 160
Treatment of banana fiber for use in the reinforcement of polymeric matrices
Benítez, A. N., Monzón, M., Angulo, I., Ortega, Z., Hernández-Castellano, P. M., & Marrero-Alemán, M. D. (2012) · Measurement · doi:10.1016/j.measurement.2012.11.021 · Cited by 91
Fabrication and Characterization ofH. sabdariffaFiber-Reinforced Green Polymer Composites
Singha, A. S., & Thakur, V. K. (2009) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550902725498 · Cited by 86
Natural Fibers for Sustainable Bio-Composites
Ngo, T.-D. (2018) · InTech eBooks · doi:10.5772/intechopen.71012 · Cited by 86
Carus, M., Eder, A., Dammer, L., Korte, H. E., Scholz, L., Essel, R., Breitmayer, E., & Barth, M. (2015) · doi:10.52548/thsz9515 · Cited by 78
Saccaharum Cilliare Fiber Reinforced Polymer Composites
Singha, A. S., & Thakur, V. K. (2008) · Journal of Chemistry · doi:10.1155/2008/941627 · Cited by 77
EFFECTS OF NATURAL FIBRE SURFACE ON COMPOSITE PROPERTIES: A REVIEW
Kabir, M. M., Wang, H., Aravinthan, T., Cardona, F., & Lau, K.-T. (2011) · University of Southern Queensland ePrints (University of Southern Queensland) · Cited by 73
Shah, D. U., Sharma, B., & Ramage, M. H. (2018) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2018.05.009 · Cited by 70
Review of natural fiber composites
Rohan, T., Tushar, B., & Mahesha, G. T. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/314/1/012020 · Cited by 60
Extraction and refinement of agricultural plant fibers for composites manufacturing
Bousfield, G., Morin, S., Jacquet, N., & Richel, A. (2018) · Comptes Rendus Chimie · doi:10.1016/j.crci.2018.07.001 · Cited by 57
Cotton Fiber Nonwovens for Automotive Composites
Kamath, M. G., Bhat, G. S., Parikh, D. V., & Mueller, D. H. (2005) · International Nonwovens Journal · doi:10.1177/1558925005os-1400105 · Cited by 49
Todor, M. P., Bulei, C., Hepuţ, T., & Kiss, I. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/294/1/012021 · Cited by 44
Biodegradation of Coir and Sisal Applied in the Automotive Industry
Salazar, V. L. P., Leão, A. L., Rosa, D. D. S., Gomez, J. G. C., & Alli, R. C. P. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0315-3 · Cited by 42
Carvalho, H., Raposo, A., Ribeiro, I., Kaufmann, J., Götze, U., Peças, P., & Henriques, E. M. P. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.03.144 · Cited by 26
Self-citationBiodegradability of Biobased Polymeric Materials in Natural Environments
Muniyasamy, S., Muniyasamy, S., John, M. J., & John, M. J. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch104 · Cited by 21
Naldony, P., Flores‐Sahagun, T. H. S., & Satyanarayana, K. G. (2015) · Journal of Composite Materials · doi:10.1177/0021998315570141 · Cited by 20
Cited by
Elfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101271 · Cited by 1,034
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Kamarudin, S. H., Mohd Basri, M. S., Rayung, M., Abu, F., Ahmad, S., Norizan, M. N., Osman, S., Sarifuddin, N., Desa, M. S. Z. M., Abdullah, U. H., et al. (2022) · Polymers · doi:10.3390/polym14173698 · Cited by 459
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Metadata
- Authors
- Peças, P., Carvalho, H., Salman, H., & Leite, M.
- Venue
- Journal of Composites Science
- Publisher
- MDPI AG
- Published
- 2018-11-17
- Volume
- 2
- Issue
- 4
- Pages
- 66
- ISSN
- 2504-477X (ISSN-L)
- OpenAlex
- W2901062302
- Cited by
- 750
- References
- 48
- FWCI
- 24.45
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.