Ultrafast Laser Additive Manufacturing: A Review
Open accessThe DOI matches its Crossref record; 280 of the 296 references it cites were found in a registry or an index.
Abstract
Ultrafast lasers are proven and continually evolving manufacturing tools. Concurrently, additive manufacturing (AM) has emerged as a key area of interest for 3D fabrication of objects with arbitrary geometries.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Items 201–280 of 280
Nano- and Microdot Array Formation of FeSi2by Nanosecond Excimer Laser-Induced Forward Transfer
Narazaki, A., Sato, T., Kurosaki, R., et al. (2008) · Applied Physics Express · doi:10.1143/apex.1.057001 · Cited by 48
Studies on perovskite film ablation and scribing with ns-, ps- and fs-laser pulses
Bayer, L., Ye, X., Lorenz, P., & Zimmer, K. (2017) · Applied Physics A · doi:10.1007/s00339-017-1234-5 · Cited by 48 · cited 1×
“Virtually any material can be ablated by ultrafast lasers, with applications in, but not limited to, metal [52], semiconductor [53], dielectric [54], and bone [55] micromachining, thin film machining [56], microfluidic structure fabrication [57], microelectromechanical systems (MEMS) device manufacturing [58], laser-i…”
BackgroundBiver, É., Rapp, L., Alloncle, A., et al. (2014) · Optics Express · doi:10.1364/oe.22.017122 · Cited by 47
Ballistic laser-assisted solid transfer (BLAST) from a thin film precursor
Banks, D. P., Grivas, C., Zergioti, I., et al. (2008) · Optics Express · doi:10.1364/oe.16.003249 · Cited by 47
Jonušauskas, L., Rekštytė, S., Buividas, R., Butkus, S., Gadonas, R. A., Juodkazis, S., & Malinauskas, M. (2017) · Optical Engineering · doi:10.1117/1.oe.56.9.094108 · Cited by 47
Origin and avoidance of droplets during laser ablation of metals
Fähler, S., Störmer, M., & Krebs, H. (1997) · Applied Surface Science · doi:10.1016/s0169-4332(96)00782-9 · Cited by 46
Ultrashort pulsed fiber laser welding and sealing of transparent materials
Huang, H., Yang, L.-M., & Liu, J. (2012) · Applied Optics · doi:10.1364/ao.51.002979 · Cited by 46
Murakami, M., Liu, B., Hu, Z., et al. (2009) · Applied Physics Express · doi:10.1143/apex.2.042501 · Cited by 45
From photoinduced electron transfer to 3D metal microstructures via direct laser writing
Waller, E. H., & von Freymann, G. (2018) · Nanophotonics · doi:10.1515/nanoph-2017-0134 · Cited by 44
3D printed fiber sockets for plug and play micro-optics
Parvathi Nair, S., Trisno, J., Wang, H., & Yang, J. K. W. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/abc674 · Cited by 44
Short-pulse laser deposition of diamond-like carbon thin films
Banks, P. S., Dinh, L. N., Stuart, B. C., et al. (1999) · Applied Physics A · doi:10.1007/s003390051415 · Cited by 43
Baldacchini, T., & Zadoyan, R. (2010) · Optics Express · doi:10.1364/oe.18.019219 · Cited by 43
Welding of 304 stainless steel and glass using high-repetition-frequency femtosecond laser
Wang, Y., Li, Y., Ao, S., et al. (2021) · Materials Research Express · doi:10.1088/2053-1591/ac30b1 · Cited by 43
Fabrication of 3D metal/polymer microstructures by site-selective metal coating
Takeyasu, N., Tanaka, T., & Kawata, S. (2007) · Applied Physics A · doi:10.1007/s00339-007-4298-9 · Cited by 42
Fermann, M. E., Höfer, M., Haberl, F., et al. (1990) · Electronics Letters · doi:10.1049/el:19901109 · Cited by 42 · cited 1×
“Parallel to the emergence of Ti:Sapphire lasers, mode-locked Nd-doped fiber lasers generating ultrashort pulses were developed [17,18].”
BackgroundRichter, S., Zimmermann, F., Döring, S., Tünnermann, A., & Nolte, S. (2012) · Applied Physics A · doi:10.1007/s00339-012-7478-1 · Cited by 42
Nava, M. M., Maggio, N. D., Zandrini, T., Cerullo, G., Osellame, R., Martín, I., & Raimondi, M. T. (2016) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2187 · Cited by 41
3D Multi-Microchannel Helical Mixer Fabricated by Femtosecond Laser inside Fused Silica
Shan, C., Chen, F., Yang, Q., et al. (2018) · Micromachines · doi:10.3390/mi9010029 · Cited by 41
Fabrication of arbitrary polymer patterns for cell study by two‐photon polymerization process
Jeon, H., Hidai, H., Hwang, D. J., & Grigoropoulos, C. P. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32517 · Cited by 40
Bera, S. K., Sabbah, A. J., Yarbrough, J. M., et al. (2007) · Applied Optics · doi:10.1364/ao.46.004650 · Cited by 39
Femtosecond laser post-processing of metal parts produced by laser additive manufacturing
Mingareev, I., Bonhoff, T., El-Sherif, A. F., Meiners, W., Kelbassa, I., Biermann, T., & Richardson, M. C. (2013) · Journal of Laser Applications · doi:10.2351/1.4824146 · Cited by 39
Molecular dynamics study of femtosecond laser interactions with Cr targets
Karim, E. T., Lin, Z., & Zhigilei, L. V. (2012) · AIP conference proceedings · doi:10.1063/1.4739881 · Cited by 39
3D Sub‐Diffraction Printing by Multicolor Photoinhibition Lithography: From Optics to Chemistry
He, M., Zhang, Z., Cao, C., Zhou, G., Kuang, C., & Liu, X. (2021) · Laser & Photonics Review · doi:10.1002/lpor.202100229 · Cited by 39
Perna, G., Capozzi, V., Pagliara, S., et al. (2001) · Thin Solid Films · doi:10.1016/s0040-6090(01)00793-3 · Cited by 38
Femtosecond laser melting and resolidifying of high-temperature powder materials
Nie, B. S., Huang, H., Bai, S., & Liu, J. (2014) · Applied Physics A · doi:10.1007/s00339-014-8897-y · Cited by 37 · cited 2×
“Rhenium, Hafnium diboride, Zirconium diboride [98] High melting temperatures (5596 C, 3250 C, 3246 C, respectively).”
BackgroundGrowth of ZnO nanoparticles and nanorods with ultrafast pulsed laser deposition
Liu, B., Hu, Z., Che, Y., et al. (2008) · Applied Physics A · doi:10.1007/s00339-008-4754-1 · Cited by 36
Heath, D. J., Feinaeugle, M., Grant‐Jacob, J. A., et al. (2015) · Optical Materials Express · doi:10.1364/ome.5.001129 · Cited by 36
Terakawa, M., Torres‐Mapa, M. L., Takami, A., Heinemann, D., Nedyalkov, N., Nakajima, Y., Hoerdt, A., Ripken, T., & Heisterkamp, A. (2016) · Optics Letters · doi:10.1364/ol.41.001392 · Cited by 36
Single-pulse multiphoton polymerization of complex structures using a digital multimirror device
Mills, B., Grant‐Jacob, J. A., Feinaeugle, M., & Eason, R. W. (2013) · Optics Express · doi:10.1364/oe.21.014853 · Cited by 35
Single step high-speed printing of continuous silver lines by laser-induced forward transfer
Puerto, D., Biver, É., Alloncle, A., et al. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.017 · Cited by 33
Femtosecond fiber laser additive manufacturing of tungsten
Bai, S., Liu, J., Yang, P., et al. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2217551 · Cited by 31 · cited 4×
“in s aller grains, which is correlated to superior strength [92].”
BackgroundInfluentialFunctional Metallic Microcomponents via Liquid-Phase Multiphoton Direct Laser Writing: A Review
Waller, E. H., Dix, S., Gutsche, J., Widera, A., & von Freymann, G. (2019) · Micromachines · doi:10.3390/mi10120827 · Cited by 31
Nakata, Y., Hayashi, E., Tsubakimoto, K., et al. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab88bf · Cited by 30
Assembling an endcap to optical fibers by femtosecond laser welding and milling
Hélie, D., Gouin, S., & Vallée, R. (2013) · Optical Materials Express · doi:10.1364/ome.3.001742 · Cited by 29
Mikšys, J., Arutinov, G., & Römer, G. R. B. E. (2019) · Applied Physics A · doi:10.1007/s00339-019-3085-8 · Cited by 29
Mizoshiri, M., & Yoshidomi, K. (2021) · Materials · doi:10.3390/ma14123285 · Cited by 29 · cited 2×
“average power compared to CW and nanosecond lasers; but is hampered by higher oxide concentrations in the patterns [84].”
BackgroundMicrostructural aspects of additive manufacturing of AlLi alloys with high Li content
Liu, D., Yürekli, B., Ullsperger, T., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109323 · Cited by 28 · cited 3×
“Ultrashort pulse laser powder-bed fusion of borosilicate glass [93], aluminum alloys [94,95], ultra-high molecular weight polyethylene (UHMWPE) [96], bimetallics [97], rhenium, and diboride ceramics [98] has been demonstrated.”
BackgroundInfluentialAbsorption mechanism of the second pulse in double-pulse femtosecond laser glass microwelding
Wu, S., Wu, D. J., Xu, J., et al. (2013) · Optics Express · doi:10.1364/oe.21.024049 · Cited by 27
Direct patterning of Cu microstructures using femtosecond laser-induced CuO nanoparticle reduction
Arakane, S., Mizoshiri, M., & Hata, S. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.06fp07 · Cited by 27
Characterization of Shear Strength and Bonding Energy of Laser Pro-duced Welding Seams in Glass
Alexeev, I. V. (2012) · Journal of Laser Micro/Nanoengineering · doi:10.2961/jlmn.2012.03.0009 · Cited by 27
Customization of direct laser lithography-based 3D scaffolds for optimized in vivo outcome
Mačiulaitis, J., Rekštytė, S., Bratchikov, M., Gudas, R., Malinauskas, M., Pockevičius, A., Ūsas, A., Rimkūnas, A., Jankauskaitė, V., Grigaliunas, V., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.05.065 · Cited by 27
Maddi, C., Aswin, J. R., Scott, A. J., et al. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900753 · Cited by 27
Cationic two-photon induced polymerization with high dynamic range
Boiko, Y. B., Costa, J. M., Wang, M. M., et al. (2001) · Optics Express · doi:10.1364/oe.8.000571 · Cited by 26
Sub-micron parallel laser direct-write
Othon, C. M., Laracuente, A. R., Ladouceur, H. D., et al. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.09.058 · Cited by 26
Sacrificial-layer free transfer of mammalian cells using near infrared femtosecond laser pulses
Zhang, J., Hartmann, B., Siegel, J., Marchi, G., Clausen‐Schaumann, H., Sudhop, S., & Huber, H. P. (2018) · PLoS ONE · doi:10.1371/journal.pone.0195479 · Cited by 26
Franz, D., Häfner, T., Kunz, T., Roth, G., Rung, S., Esen, C., & Hellmann, R. (2022) · Applied Physics B · doi:10.1007/s00340-022-07782-2 · Cited by 26
Ultra-fast laser ablation and deposition of TiO2
Sanz, M., Castillejo, M., Amoruso, S., et al. (2010) · Applied Physics A · doi:10.1007/s00339-010-5916-5 · Cited by 25
Holographic Femtosecond Laser Parallel Processing Method Based on the Fractional Fourier Transform
Wang, J., Sun, S., Zhang, H., Hasegawa, S., Wang, P., & Hayasaki, Y. (2021) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2021.106704 · Cited by 24
Orthopedics-Related Applications of Ultrafast Laser and Its Recent Advances
Li, L., Fisher, C., Burke, R., et al. (2022) · Applied Sciences · doi:10.3390/app12083957 · Cited by 24 · cited 2×
“(LIBS) [59], and implant modification [60].”
BackgroundSelective laser melting of hypereutectic Al-Si40-powder using ultra-short laser pulses
Ullsperger, T., Matthäus, G., Kaden, L., Engelhardt, H., Rettenmayr, M., Risse, S., Tünnermann, A., & Nolte, S. (2017) · Applied Physics A · doi:10.1007/s00339-017-1337-z · Cited by 22
Influence of environmental conditions in bovine bone ablation by ultrafast laser
Aljekhedab, F., Zhang, W., Haugen, H. K., Wohl, G. R., El‐Desouki, M. M., & Fang, Q. (2019) · Journal of Biophotonics · doi:10.1002/jbio.201800293 · Cited by 22 · cited 1×
“Virtually any material can be ablated by ultrafast lasers, with applications in, but not limited to, metal [52], semiconductor [53], dielectric [54], and bone [55] micromachining, thin film machining [56], microfluidic structure fabrication [57], microelectromechanical systems (MEMS) device manufacturing [58], laser-i…”
BackgroundSelf-citationZacharatos, F., Makrygianni, M., & Zergioti, I. (2021) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2021.3084443 · Cited by 22
Dynamics of double-pulse laser printing of copper microstructures
Li, Q., Grojo, D., Alloncle, A., et al. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.052 · Cited by 20
Selective laser melting of copper using ultrashort laser pulses at different wavelengths
Kaden, L., Seyfarth, B., Ullsperger, T., Matthäus, G., & Nolte, S. (2018) · Laser 3D Manufacturing · doi:10.1117/12.2289959 · Cited by 19 · cited 5×
“high thermal conductivity of copper which results in incomplete melting [78].”
BackgroundMethodInfluentialUllsperger, T., Wencke, Y. L., Yürekli, B., Matthäus, G., Rettenmayr, M., Luinstra, G. A., & Nolte, S. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110048 · Cited by 18 · cited 4×
“In-situ video monitoring is relevant for process observation of femtosecond PBF [96].”
BackgroundInfluentialYulianto, E., Chatterjee, S., Purlys, V., & Mizeikis, V. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.02.033 · Cited by 17
Amoruso, S., Tuzi, S., Pallotti, D. K., et al. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.01.021 · Cited by 16
Short-pulse actively Q-switched Er:YAG lasers
Ottaway, D. J., Harris, L., & Veitch, P. J. (2016) · Optics Express · doi:10.1364/oe.24.015341 · Cited by 16
Laser fabrication of fully printed graphene oxide microsensor
Wang, X., Zhang, J., Mei, X., Xu, B., & Miao, J. (2020) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2020.106520 · Cited by 16
Chen, Z., Zong, X., Shi, J., et al. (2018) · Applied Sciences · doi:10.3390/app8122383 · Cited by 15
Additive manufacturing of pure copper using ultrashort laser pulses
Kaden, L., Matthäus, G., Ramm, R., Ullsperger, T., Seyfarth, B., & Nolte, S. (2019) · Laser 3D Manufacturing · doi:10.1117/12.2507401 · Cited by 15 · cited 4×
“wheel, (ii) thin-wall sample with >100 μm wall thickness [79]; (b) (i) cuboid samples produced by”
BackgroundMethodInfluentialJetting regimes of double-pulse laser-induced forward transfer
Li, Q., Grojo, D., Alloncle, A., et al. (2019) · Optical Materials Express · doi:10.1364/ome.9.003476 · Cited by 15
Overlapping Limitations for ps-Pulsed LIFT Printing of High Viscosity Metallic Pastes
Munoz-Martin, D., Chen, Y., Morales, M., et al. (2020) · Metals · doi:10.3390/met10020168 · Cited by 15
Ultrafast pulsed laser deposition of carbon nanostructures: Structural and optical characterization
Pervolaraki, M., Komninou, P., Kioseoglou, J., et al. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.03.015 · Cited by 14
Shadowgraphic imaging of laser transfer driven by metal film blistering
Kononenko, T. V., Alloncle, A., Конов, В. И., et al. (2010) · Applied Physics A · doi:10.1007/s00339-010-6083-4 · Cited by 14
Ultrashort pulse laser welding of glasses without optical contacting
Richter, S., Zimmermann, F., Sutter, D. H., et al. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2250389 · Cited by 14
Additive manufacturing of bimetallic structures
Bai, S., & Liu, J. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-2918-6 · Cited by 14 · cited 2×
“Ultrashort pulse laser powder-bed fusion of borosilicate glass [93], aluminum alloys [94,95], ultra-high molecular weight polyethylene (UHMWPE) [96], bimetallics [97], rhenium, and diboride ceramics [98] has been demonstrated.”
BackgroundCharacteristics of a neodymium-doped fiber laser mode-locked with a linear external cavity
Sargsjan, G., Stamm, U., Unger, C., et al. (1991) · Optics Communications · doi:10.1016/0030-4018(91)90149-8 · Cited by 12 · cited 1×
“Parallel to the emergence of Ti:Sapphire lasers, mode-locked Nd-doped fiber lasers generating ultrashort pulses were developed [17,18].”
BackgroundHybrid additive-subtractive femtosecond 3D manufacturing of nanofilter-based microfluidic separator
Andrijec, D., Andriukaitis, D., Vargalis, R., et al. (2021) · Applied Physics A · doi:10.1007/s00339-021-04872-4 · Cited by 11
Third-harmonic generation microscopy of undeveloped photopolymerized structures
Kallioniemi, L., Annurakshita, S., & Bautista, G. (2020) · OSA Continuum · doi:10.1364/osac.405126 · Cited by 10
Selective laser melting of copper alloy
Polozov, I. A., Borisov, E. V., Sufiiarov, V. S., et al. (2020) · Materials Physics and Mechanics · doi:10.18720/mpm.4312020_8 · Cited by 10 · cited 1×
“Pure copper is a relatively stable and ductile material with excellent thermal and electrical conductivity [71].”
BackgroundParameters Affecting the Welding of Transparent Materials Using Femtosecond Laser Pulses
Shanshool, H. M., Naser, H., Alsabti, N. M. H., Flaih, H. A., Abbas, F. M., Hussin, M. J., & Hindal, S. S. (2019) · Lasers in Manufacturing and Materials Processing · doi:10.1007/s40516-019-00108-9 · Cited by 9
Patterning of phase change films with microlens arrays
Lin, Y., Hong, M. H., Chen, G. X., et al. (2007) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2006.02.111 · Cited by 7
Picosecond laser welding of optical to metal components
Carter, R., Troughton, M., Chen, J., et al. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2213227 · Cited by 6
Inoue, Y., Muramatsu, S., ITOIGAWA, F., et al. (2017) · Journal of Applied Physics · doi:10.1063/1.4996626 · Cited by 5
Mizoshiri, M., & Hata, S. (2016) · Research & Reviews Journal of Material Sciences · doi:10.4172/2321-6212.1000155 · Cited by 4 · cited 3×
“A similar process that instead reduces CuO by laser irradiation can produce microstructures on glass and flexible polydimethylsiloxane (PDMS) [82,83].”
BackgroundInfluentialLaser induced forward transfer of 40nm Chromium film using ultrashort laser pulses
Alloncle, A., Bouffaron, R., Hermann, J., et al. (2005) · HAL (Le Centre pour la Communication Scientifique Directe) · Cited by 2
The dynamics and deposition results of femtosecond laser-induced liquid film forward transfer
Guo, Q., Wang, M., & Zhang, Z. (2021) · International Conference on Laser, Optics and Optoelectronic Technology (LOPET) · doi:10.1117/12.2602410 · Cited by 2
Selective laser melting of glass using ultrashort laser pulses
Seyfarth, B., Matthäus, G., Ullsperger, T., Nolte, S., Schade, L., & Tunnermann, A. (2018) · Laser 3D Manufacturing V · doi:10.1117/12.2289614
Laser-induced forward transfer of 40 nm Chromium film using ultrashort laser pulses
Alloncle, A.-P., Bouffaron, R., Hermann, J., & Sentis, M. (2006) · SPIE Proceedings · doi:10.1117/12.677445
Research works printed but not linked: 5
- Rullière, C. (2013). Femtosecond Laser Pulses: Principles and Experiments, Springer.
- Haglund, R.F.J. (2006). 3D Laser Microfabrication, Wiley-VCH.
- Piqué, A., and Charipar, K.M. (2021). Handbook of Laser Micro- and Nano-Engineering, Springer International Publishing.
- Gamaly, E.G., Rode, A.v., and Luther-Davies, B. (2006). Pulsed Laser Deposition of Thin Films: Applications-Led Growth of Functional Materials, John Wiley & Sons, Ltd.
- Juodkazis, 2018, Synchronization of Linear Stages and Galvo-Scanners for Efficient Direct Laser Fabrication of Polymeric 3D Meso-Scale Structures, Proc. SPIE, 10523, 132
Cited by
Alontseva, D. L., Azamatov, B. N., Safarova, Y., et al. (2023) · Coatings · doi:10.3390/coatings13071175 · Cited by 37
Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers
Han, J., Liu, C., Bradford-Vialva, R. L., Klosterman, D., & Cao, L. (2023) · Materials · doi:10.3390/ma16134636 · Cited by 44
“This surge in growth can be attributed to the rapid development of advanced technologies [23,24].”
BackgroundAdditive manufacturing processing with ultra-short-pulse lasers
Soleimani, M., Nankali, M., Duley, W. W., Zhou, Y., & Peng, P. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.10.006 · Cited by 33
Dynamic spatial beam shaping for ultrafast laser processing: a review
Mauclair, C., Najih, B., Comte, V., Bourquard, F., & Delaigue, M. (2025) · Opto-Electronic Science · doi:10.29026/oes.2025.250002 · Cited by 39
Current status and potential strategies for crack-free tungsten by laser powder bed fusion: A review
Ji, L., Wei, S., Wang, Z., Zhang, Y., Radhamani, A. V., & Ramakrishna, S. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.10.020 · Cited by 19
Metadata
- Authors
- Saunders, J., Elbestawi, M., & Fang, Q.
- Affiliations
- McMaster University (CA)
- Department of Mechanical Engineering, McMaster University, Hamilton, ON L8S 4L8, Canada
- Corresponding author
- Fang, Qiyin
- ORCID
- Fang, Qiyin
- Venue
- Journal of Manufacturing and Materials Processing
- Publisher
- MDPI AG
- Published
- 2023-05-05
- Volume
- 7
- Issue
- 3
- Pages
- 89
- ISSN
- 2504-4494 (ISSN-L)
- OpenAlex
- W4372285931
- Semantic Scholar
- a820bcde57fd446865a304fe1bf7b032435342ab
- Cited by
- 35
- References
- 296
- Citations by year
- 2026: 12 · 2025: 9 · 2024: 10 · 2023: 3
- FWCI
- 3.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Journal of Manufacturing and Materials Processing (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Natural Science and Engineering Research Council of Canada (RGPIN-2019-07127, 2018IT100212)
- Foshan Science and Technology Innovation Project (RGPIN-2019-07127, 2018IT100212)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- ultrafast lasers, laser additive manufacturing, laser powder bed fusion, selective laser sintering, multiphoton lithography, laser-induced forward transfer, pulsed laser deposition, laser welding, process monitoring and control, hybrid production systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.