The DOI matches its Crossref record; 280 of the 296 references it cites were found in a registry or an index.
Ultrafast Laser Additive Manufacturing: A Review
Open accessAbstract
Ultrafast lasers are proven and continually evolving manufacturing tools. Concurrently, additive manufacturing (AM) has emerged as a key area of interest for 3D fabrication of objects with arbitrary geometries.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and Applications
Chen, X., & Mao, S. S. (2007) · Chemical Reviews · doi:10.1021/cr0500535 · Cited by 10,688
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805 · cited 2×
“Optimal part orientation, laser parameter optimization and consistency, high residual stresses, and surface quality are just so e of the challenges within powder-bed fusion processes [69,70].”
BackgroundAdditive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Hell, S. W., & Wichmann, J. (1994) · Optics Letters · doi:10.1364/ol.19.000780 · Cited by 6,065
Stimulated Optical Radiation in Ruby
MAIMAN, T. H. (1960) · Nature · doi:10.1038/187493a0 · Cited by 5,121 · cited 1×
“Since the first report of laser action in 1960, lasers have undergone significant advancement and played a crucial role in many seminal discoveries and publications [6].”
BackgroundAdditive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Compression of amplified chirped optical pulses
Strickland, D., & Mourou, G. (1985) · Optics Communications · doi:10.1016/0030-4018(85)90120-8 · Cited by 3,937 · cited 1×
“[23] introduced a method of amplification, referred to as chirped pulse amplification, in which the pulses are stretched to reduce the peak intensity, amplified in a gain medium while remaining below the damage threshold, and then compressed in the opposite manner of the stretching so that the ultrashort pulse is reco…”
MethodFemtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Gold Helix Photonic Metamaterial as Broadband Circular Polarizer
Gansel, J. K., Thiel, M., Rill, M. S., Decker, M., Bade, K., Saile, V., von Freymann, G., Linden, S., & Wegener, M. (2009) · Science · doi:10.1126/science.1177031 · Cited by 2,694
Keller, U., Weingarten, K. J., Kartner, F. X., Kopf, D., Braun, B., Jung, I. D., Fluck, R., Honninger, C., Matuschek, N., & Aus der Au, J. (1996) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/2944.571743 · Cited by 1,978
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
60-fsec pulse generation from a self-mode-locked Ti:sapphire laser
Spence, D. E., Kean, P. N., & Sibbett, W. (1991) · Optics Letters · doi:10.1364/ol.16.000042 · Cited by 1,558 · cited 1×
“[14] discovered self-mode-locking in a Ti:Sapphire laser due to the Kerr-lens mode-locking (KLM) effect.”
BackgroundNanosecond-to-femtosecond laser-induced breakdown in dielectrics
Stuart, B. C., Feit, M. D., Herman, S., Rubenchik, A. M., Shore, B. W., & Perry, M. D. (1996) · Physical Review B · doi:10.1103/physrevb.53.1749 · Cited by 1,553 · cited 2×
“Multiphoton and tunneling ionization produce the seed electrons for the avalanche process [41].”
BackgroundUltrafast laser processing of materials: from science to industry
Malinauskas, M., Žukauskas, A., Hasegawa, S., Hayasaki, Y., Mizeikis, V., Buividas, R., & Juodkazis, S. (2016) · Light: Science & Applications · doi:10.1038/lsa.2016.133 · Cited by 1,364
Spectroscopic and laser characteristics of Ti:Al_2O_3
Moulton, P. F. (1986) · Journal of the Optical Society of America B · doi:10.1364/josab.3.000125 · Cited by 1,325 · cited 1×
“In 1986, a new high-gain cross section, broad absorption and emission linewidths, solid-state lasing medium came onto the scene: titanium-doped sapphire (Ti:Al2O3) [13].”
BackgroundA review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Ionization in the field of a strong electromagnetic wave
Keldysh, L. V. (2023) · Selected Papers of Leonid V Keldysh · doi:10.1142/9789811279461_0008 · Cited by 1,287
High Power Fiber Lasers: A Review
Zervas, M. N., & Codemard, C. A. (2014) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2014.2321279 · Cited by 1,194
Fermann, M. E., & Hartl, I. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.280 · Cited by 1,160 · cited 1×
“03 μm) lasers are now prevalent, and are more adaptable, compact, and require less alignment than their rod-shaped counterparts [19].”
BackgroundInducing and probing non-thermal transitions in semiconductors using femtosecond laser pulses
Sundaram, S. K., & Mazur, E. (2002) · Nature Materials · doi:10.1038/nmat767 · Cited by 1,023 · cited 1×
“If the electrons are further excited by the equivalent of an additional bandgap energy, they can knock other electrons from the valence band to the conduction band, generating additional free carriers [48].”
BackgroundTerawatt to Petawatt Subpicosecond Lasers
Perry, M. D., & Mourou, G. (1994) · Science · doi:10.1126/science.264.5161.917 · Cited by 952 · cited 1×
“Amplification of ultrashort pulses is a challenge due to the high peak power and the nonlinear optical effects it can produce in air and gain media, leading to plasma formation and damage [22].”
BackgroundTwo-photon direct laser writing of ultracompact multi-lens objectives
Gissibl, T., Thiele, S., Herkommer, A., & Giessen, H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.121 · Cited by 916
Laser-Induced Periodic Surface Structures— A Scientific Evergreen
Bonse, J., Hohm, S., Kirner, S. V., Rosenfeld, A., & Kruger, J. (2017) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2016.2614183 · Cited by 907
(1974) · Journal of Experimental and Theoretical Physics · Cited by 905
Additive manufacturing: Challenges, trends, and applications
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814018822880 · Cited by 861 · cited 2×
“Optimal part orientation, laser parameter optimization and consistency, high residual stresses, and surface quality are just so e of the challenges within powder-bed fusion processes [69,70].”
BackgroundPulsed laser vaporization and deposition
Willmott, P. R., & Huber, J. R. (2000) · Reviews of Modern Physics · doi:10.1103/revmodphys.72.315 · Cited by 790
Non-thermal melting in semiconductors measured at femtosecond resolution
Rousse, A., Rischel, C., Fourmaux, S., Uschmann, I., Sebban, S., Grillon, G., Balcou, P., Förster, E., Geindre, J. P., Audebert, P., et al. (2001) · Nature · doi:10.1038/35065045 · Cited by 729 · cited 1×
“The electronic excitation by high-intensity ultrashort pulses that promotes a significant portion of electrons from the valence band (about 10%) may affect the interatomic bonding, such that melting or other phase transformations occur [42,43].”
BackgroundThree‐dimensional optical laser lithography beyond the diffraction limit
Fischer, J., & Wegener, M. (2013) · Laser & Photonics Reviews · doi:10.1002/lpor.201100046 · Cited by 709
Laser-induced electric breakdown in solids
Bloembergen, N. (1974) · IEEE Journal of Quantum Electronics · doi:10.1109/jqe.1974.1068132 · Cited by 676 · cited 1×
“In the presence of sufficient and sustained electromagnetic field strength, newly promoted free carriers undergo the same impact ionization process, giving rise to an ionization “avalanche” [49].”
BackgroundAdditive manufacturing of 3D nano-architected metals
Vyatskikh, A., Delalande, S., Kudo, A., Zhang, X., Portela, C. M., & Greer, J. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03071-9 · Cited by 593
LaFratta, C. N., Fourkas, J. T., Baldacchini, T., & Farrer, R. A. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603995 · Cited by 589
Modelling ultrafast laser ablation
Rethfeld, B., Ivanov, D. S., Garcia, M. E., & Anisimov, S. I. (2017) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/50/19/193001 · Cited by 545
Achieving λ/20 Resolution by One-Color Initiation and Deactivation of Polymerization
Li, L., Gattass, R. R., Gershgoren, E., Hwang, H., & Fourkas, J. T. (2009) · Science · doi:10.1126/science.1168996 · Cited by 524
Scalable submicrometer additive manufacturing
Saha, S. K., Wang, D., Nguyen, V. H., Chang, Y., Oakdale, J. S., & Chen, S.-C. (2019) · Science · doi:10.1126/science.aax8760 · Cited by 513
Laser Deposition of Polymer and Biomaterial Films
Chrisey, D. B., Piqué, A., McGill, R. A., Horwitz, J. S., Ringeisen, B. R., Bubb, D. M., & Wu, P. K. (2003) · Chemical Reviews · doi:10.1021/cr010428w · Cited by 495
Femtosecond laser three-dimensional micro- and nanofabrication
Sugioka, K., & Cheng, Y. (2014) · Applied Physics Reviews · doi:10.1063/1.4904320 · Cited by 490
LOCKING OF He–Ne LASER MODES INDUCED BY SYNCHRONOUS INTRACAVITY MODULATION
Hargrove, L. E., Fork, R. L., & Pollack, M. A. (1964) · Applied Physics Letters · doi:10.1063/1.1754025 · Cited by 489 · cited 1×
“First observed in a HeNe laser in 1964 [12], mode locking was achieved in dye and rare-earth doped solid-state lasers (e.”
BackgroundDynamics of femtosecond laser interactions with dielectrics
Mao, S. S., Quéré, F., Guizard, S., Mao, X., Russo, R. E., Petite, G., & Martin, P. (2004) · Applied Physics A · doi:10.1007/s00339-004-2684-0 · Cited by 485 · cited 2×
“Some of the excited electrons ultimately relax to create intrinsic defects, and some relax by transferring energy to lattice vibrations and heating within tens of picoseconds [46,204].”
BackgroundLasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449 · cited 1×
“Continuous mode or nanosecond pulse laser-based AM enables direct transfer of energy to a material in a small focal region and leads to curing, sintering, or melting with a better resolution compared to extrusion-based methods [67].”
MethodUltrafast laser nanostructuring of photopolymers: a decade of advances
Malinauskas, M., Farsari, M., Piskarskas, A., & Juodkazis, S. (2013) · Physics Reports · doi:10.1016/j.physrep.2013.07.005 · Cited by 431
A review on the processing accuracy of two-photon polymerization
Zhou, X., Hou, Y., & Lin, J. (2015) · AIP Advances · doi:10.1063/1.4916886 · Cited by 422
Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography
Scott, T. F., Kowalski, B. A., Sullivan, A. C., Bowman, C. N., & McLeod, R. R. (2009) · Science · doi:10.1126/science.1167610 · Cited by 421
Role of additive manufacturing applications towards environmental sustainability
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Rab, S. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.07.005 · Cited by 419
A review of ultrafast laser materials micromachining
Cheng, J., Liu, C.-S., Shang, S., Liu, D., Perrie, W., Dearden, G., & Watkins, K. (2013) · Optics & Laser Technology · doi:10.1016/j.optlastec.2012.06.037 · Cited by 416
Metal Ablation with Short and Ultrashort Laser Pulses
Leitz, K.-H., Redlingshöfer, B., Reg, Y., Otto, A., & Schmidt, M. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.128 · Cited by 410
Photopolymer Materials and Processes for Advanced Technologies
Crivello, J. V., & Reichmanis, E. (2014) · Chemistry of Materials · doi:10.1021/cm402262g · Cited by 406
Ultrafast multi-focus 3-D nano-fabrication based on two-photon polymerization
Geng, Q., Wang, D., Chen, P., & Chen, S.-C. (2019) · Nature Communications · doi:10.1038/s41467-019-10249-2 · Cited by 405
Balling phenomena in selective laser melted tungsten
Zhou, X., Liu, X., Zhang, D., Shen, Z., & Liu, W. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.032 · Cited by 399
In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration
Dietrich, P.-I., Blaicher, M., Reuter, I., Billah, M., Hoose, T., Hofmann, A., Caer, C., Dangel, R., Offrein, B., Troppenz, U., et al. (2018) · Nature Photonics · doi:10.1038/s41566-018-0133-4 · Cited by 395
The role of electron-phonon coupling in femtosecond laser damage of metals
Wellershoff, S.-S., Hohlfeld, J., Güdde, J., & Matthias, E. (1999) · Applied Physics A: Materials Science & Processing · doi:10.1007/s003390051362 · Cited by 374
Wu, C., & Zhigilei, L. V. (2014) · Applied Physics A · doi:10.1007/s00339-013-8086-4 · Cited by 367 · cited 2×
“There are many ablation mechanisms that have been proposed, and they occur under different irradiation parameters and in different materials, as often modelled by hydrodynamic and molecular dynamics simulations [61,62].”
BackgroundLaser Direct-Write Techniques for Printing of Complex Materials
Arnold, C. B., Serra, P., & Piqué, A. (2007) · MRS Bulletin · doi:10.1557/mrs2007.11 · Cited by 360
Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres
Gissibl, T., Thiele, S., Herkommer, A., & Giessen, H. (2016) · Nature Communications · doi:10.1038/ncomms11763 · Cited by 359
Direct laser writing: Principles and materials for scaffold 3D printing
Selimis, A., Mironov, V., & Farsari, M. (2015) · Microelectronic Engineering · doi:10.1016/j.mee.2014.10.001 · Cited by 344
Giant Optical Pulsations from Ruby
McClung, F. J., & Hellwarth, R. W. (1962) · Journal of Applied Physics · doi:10.1063/1.1777174 · Cited by 342
Two‐Component Polymer Scaffolds for Controlled Three‐Dimensional Cell Culture
Klein, F., Richter, B., Striebel, T., Franz, C. M., Freymann, G. V., Wegener, M., & Bastmeyer, M. (2011) · Advanced Materials · doi:10.1002/adma.201004060 · Cited by 334
Defect structure process maps for laser powder bed fusion additive manufacturing
Gordon, J. V., Narra, S. P., Cunningham, R. W., Liu, H., Chen, H., Suter, R. M., Beuth, J. L., & Rollett, A. D. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101552 · Cited by 329
Coulomb explosion in ultrashort pulsed laser ablation ofAl2O3
Stoian, R., Ashkenasi, D., Rosenfeld, A., & Campbell, E. E. B. (2000) · Physical Review B · doi:10.1103/physrevb.62.13167 · Cited by 309 · cited 1×
“From the conduction band, free electrons gain kinetic energy by absorbing additional photons, leading to a plasma state, or in the case of extreme ionization, Coulombic explosion [31,44,45].”
BackgroundTwo-photon lithography of nanorods in SU-8 photoresist
Juodkazis, S., Mizeikis, V., Seet, K. K., Miwa, M., & Misawa, H. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/6/039 · Cited by 309
Recent advances in grain refinement of light metals and alloys
Easton, M. A., Qian, M., Prasad, A., & StJohn, D. H. (2016) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2015.10.001 · Cited by 308
Fundamentals of ultrafast laser–material interaction
Shugaev, M. V., Wu, C., Armbruster, O., Naghilou, A., Brouwer, N., Ivanov, D. S., Derrien, T. J.-Y., Bulgakova, N. M., Kautek, W., Rethfeld, B., et al. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.274 · Cited by 307 · cited 2×
“Electron subsystem thermalization is on the order of femtoseconds, and the electrons transfer their energy to atomic lattice vibrations (electron-phonon coupling) picoseconds after irradiation [28].”
BackgroundMultiple-spot parallel processing for laser micronanofabrication
Kato, J.-I., Takeyasu, N., Adachi, Y., Sun, H.-B., & Kawata, S. (2005) · Applied Physics Letters · doi:10.1063/1.1855404 · Cited by 303
Hydrodynamic simulations of metal ablation by femtosecond laser irradiation
Colombier, J. P., Combis, P., Bonneau, F., Le Harzic, R., & Audouard, E. (2005) · Physical Review B · doi:10.1103/physrevb.71.165406 · Cited by 293 · cited 2×
“There are many ablation mechanisms that have been proposed, and they occur under different irradiation parameters and in different materials, as often modelled by hydrodynamic and molecular dynamics simulations [61,62].”
BackgroundTowards Laser-Textured Antibacterial Surfaces
Lutey, A. H. A., Gemini, L., Romoli, L., Lazzini, G., Fuso, F., Faucon, M., & Kling, R. (2018) · Scientific Reports · doi:10.1038/s41598-018-28454-2 · Cited by 292
Toward 3D Printing of Pure Metals by Laser‐Induced Forward Transfer
Visser, C. W., Pohl, R., Sun, C., Römer, G., Huis in ‘t Veld, B., & Lohse, D. (2015) · Advanced Materials · doi:10.1002/adma.201501058 · Cited by 282
Joining of engineering ceramics
Fernie, J. A., Drew, R. A. L., & Knowles, K. M. (2009) · International Materials Reviews · doi:10.1179/174328009x461078 · Cited by 282
Femtosecond laser-induced breakdown spectroscopy
Labutin, T. A., Lednev, V. N., Ilyin, A. A., & Popov, A. M. (2016) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c5ja00301f · Cited by 280 · cited 3×
“(LIBS) [59], and implant modification [60].”
BackgroundWünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
Laser printing of cells into 3D scaffolds
Ovsianikov, A., Gruene, M., Pflaum, M., Koch, L., Maiorana, F., Wilhelmi, M., Haverich, A., & Chichkov, B. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014104 · Cited by 266
Tanaka, T., Ishikawa, A., & Kawata, S. (2006) · Applied Physics Letters · doi:10.1063/1.2177636 · Cited by 263
Sugioka, K., Xu, J., Wu, D., Hanada, Y., Wang, Z., Cheng, Y., & Midorikawa, K. (2014) · Lab Chip · doi:10.1039/c4lc00548a · Cited by 259
Two Photon Polymerization of Polymer–Ceramic Hybrid Materials for Transdermal Drug Delivery
Ovsianikov, A., Chichkov, B., Mente, P., Monteiro‐Riviere, N. A., Doraiswamy, A., & Narayan, R. J. (2007) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2007.02115.x · Cited by 259
Harinarayana, V., & Shin, Y. C. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.107180 · Cited by 259
Welding of Transparent Materials Using Femtosecond Laser Pulses
Tamaki, T., Watanabe, W., Nishii, J., & Itoh, K. (2005) · Japanese Journal of Applied Physics · doi:10.1143/jjap.44.l687 · Cited by 249
DORAISWAMY, A., JIN, C., NARAYAN, R., MAGESWARAN, P., MENTE, P., MODI, R., AUYEUNG, R., CHRISEY, D., OVSIANIKOV, A., & CHICHKOV, B. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.01.004 · Cited by 245
Ultrafast thermal melting of laser-excited solids by homogeneous nucleation
Rethfeld, B., Sokolowski-Tinten, K., von der Linde, D., & Anisimov, S. I. (2002) · Physical Review B · doi:10.1103/physrevb.65.092103 · Cited by 242
Hydrogels for Two‐Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix
Torgersen, J., Qin, X., Li, Z., Ovsianikov, A., Liska, R., & Stampfl, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203880 · Cited by 238
Bulgakova, N. M., Stoian, R., Rosenfeld, A., Hertel, I. V., & Campbell, E. E. B. (2004) · Physical Review B · doi:10.1103/physrevb.69.054102 · Cited by 232 · cited 1×
“From the conduction band, free electrons gain kinetic energy by absorbing additional photons, leading to a plasma state, or in the case of extreme ionization, Coulombic explosion [31,44,45].”
BackgroundHeterogeneous to homogeneous melting transition visualized with ultrafast electron diffraction
Mo, M. Z., Chen, Z., Li, R. K., Dunning, M., Witte, B. B. L., Baldwin, J. K., Fletcher, L. B., Kim, J. B., Ng, A., Redmer, R., et al. (2018) · Science · doi:10.1126/science.aar2058 · Cited by 224
Ultrafast laser welding of ceramics
Penilla, E. H., Devia-Cruz, L. F., Wieg, A. T., Martinez-Torres, P., Cuando-Espitia, N., Sellappan, P., Kodera, Y., Aguilar, G., & Garay, J. E. (2019) · Science · doi:10.1126/science.aaw6699 · Cited by 224
Ultrafast solid-state laser oscillators: a success story for the last 20 years with no end in sight
Keller, U. (2010) · Applied Physics B · doi:10.1007/s00340-010-4045-3 · Cited by 223 · cited 1×
“As a practical and tunable femtosecond source, Ti:Sapphire lasers are responsible for significant advancement in scientific understanding of the behavior of physical systems at these timescales, spectroscopy, nonlinear optics, and with increased amplification, material processing and manufacturing [16].”
Background3D Printing of Highly Pure Copper
Tran, T. Q., Chinnappan, A., Lee, J. K. Y., Loc, N. H., Tran, L. T., Wang, G., Kumar, V. V., Jayathilaka, W. A. D. M., Ji, D., Doddamani, M., et al. (2019) · Metals · doi:10.3390/met9070756 · Cited by 220
Kiyama, S., Matsuo, S., Hashimoto, S., & Morihira, Y. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp900915r · Cited by 208
Acrylic-based resin with favorable properties for three-dimensional two-photon polymerization
Baldacchini, T., LaFratta, C. N., Farrer, R. A., Teich, M. C., Saleh, B. E. A., Naughton, M. J., & Fourkas, J. T. (2004) · Journal of Applied Physics · doi:10.1063/1.1728296 · Cited by 207
Process monitoring and inspection systems in metal additive manufacturing: Status and applications
Chua, Z. Y., Ahn, I. H., & Moon, S. K. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0029-7 · Cited by 207
Radke, A., Gissibl, T., Klotzbücher, T., Braun, P. V., & Giessen, H. (2011) · Advanced Materials · doi:10.1002/adma.201100543 · Cited by 205
Lu, Q. Y., & Wong, C. H. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1351201 · Cited by 198
Viewpoint: metallurgical aspects of powder bed metal additive manufacturing
Hebert, R. J. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9479-x · Cited by 197
Three-dimensional femtosecond laser processing for lab-on-a-chip applications
Sima, F., Sugioka, K., Vázquez, R. M., Osellame, R., Kelemen, L., & Ormos, P. (2018) · Nanophotonics · doi:10.1515/nanoph-2017-0097 · Cited by 196 · cited 2×
“From the conduction band, free electrons gain kinetic energy by absorbing additional photons, leading to a plasma state, or in the case of extreme ionization, Coulombic explosion [31,44,45].”
BackgroundGittard, S. D., Nguyen, A., Obata, K., Koroleva, A., Narayan, R. J., & Chichkov, B. N. (2011) · Biomedical Optics Express · doi:10.1364/boe.2.003167 · Cited by 189
Müller, A. V., Schlick, G., Neu, R., Anstätt, C., Klimkait, T., Lee, J., Pascher, B., Schmitt, M., & Seidel, C. (2019) · Nuclear Materials and Energy · doi:10.1016/j.nme.2019.02.034 · Cited by 189
Ultra-strong architected Cu meso-lattices
Wendy Gu, X., & Greer, J. R. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.01.006 · Cited by 182
Fabrication of Conductive 3D Gold‐Containing Microstructures via Direct Laser Writing
Blasco, E., Müller, J., Müller, P., Trouillet, V., Schön, M., Scherer, T., Barner‐Kowollik, C., & Wegener, M. (2016) · Advanced Materials · doi:10.1002/adma.201506126 · Cited by 182
Tolias, P. (2017) · Nuclear Materials and Energy · doi:10.1016/j.nme.2017.08.002 · Cited by 179 · cited 1×
“Tungsten, also known as wolfram, is a rare metal with a high melting point of 3695 K (for comparison, aluminum melts at 933 K), good thermal conductivity (174 W/m K), and has potential for use in extreme environments, such as nuclear fusion reactors [87].”
BackgroundPrecision glass machining, drilling and profile cutting by short pulse lasers
Nikumb, S., Chen, Q., Li, C., Reshef, H., Zheng, H. Y., Qiu, H., & Low, D. (2005) · Thin Solid Films · doi:10.1016/j.tsf.2004.08.136 · Cited by 171 · cited 1×
“Virtually any material can be ablated by ultrafast lasers, with applications in, but not limited to, metal [52], semiconductor [53], dielectric [54], and bone [55] micromachining, thin film machining [56], microfluidic structure fabrication [57], microelectromechanical systems (MEMS) device manufacturing [58], laser-i…”
BackgroundMicrodeposition of metal and oxide structures using ultrashort laser pulses
Zergioti, I., Mailis, S., Vainos, N. A., Papakonstantinou, P., Kalpouzos, C., Grigoropoulos, C. P., & Fotakis, C. (1998) · Applied Physics A: Materials Science & Processing · doi:10.1007/s003390050717 · Cited by 170
Open-cellular copper structures fabricated by additive manufacturing using electron beam melting
Ramirez, D. A., Murr, L. E., Li, S. J., Tian, Y. X., Martinez, E., Martinez, J. L., Machado, B. I., Gaytan, S. M., Medina, F., & Wicker, R. B. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.03.053 · Cited by 169 · cited 2×
“Additive manufacturing of copper is especially attractive because it enables the production of complex geometries that may improve heat transfer devices and does not require additional manufacturing steps like welding [72,73].”
BackgroundAmato, L., Gu, Y., Bellini, N., Eaton, S. M., Cerullo, G., & Osellame, R. (2012) · Lab on a Chip · doi:10.1039/c2lc21116e · Cited by 167
Mačiulaitis, J., Deveikytė, M., Rekštytė, S., Bratchikov, M., Darinskas, A., Šimbelytė, A., Daunoras, G., Laurinavičienė, A., Laurinavičius, A., Gudas, R., et al. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015015 · Cited by 164
Ultrafast dynamics observation during femtosecond laser-material interaction
Guo, B., Sun, J., Lu, Y., & Jiang, L. (2019) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab3a24 · Cited by 164
Richter, B., Hahn, V., Bertels, S., Claus, T. K., Wegener, M., Delaittre, G., Barner‐Kowollik, C., & Bastmeyer, M. (2017) · Advanced Materials · doi:10.1002/adma.201604342 · Cited by 162
Fereiduni, E., Ghasemi, A., & Elbestawi, M. A. (2020) · Aerospace · doi:10.3390/aerospace7060077 · Cited by 161 · cited 1×
“Metals that are commonly used are stainless and tool steels, aluminum alloys, titanium and its alloys, nickel alloys, and some cobalt alloys [68].”
BackgroundSelf-citationUltrafast Laser Applications in Manufacturing Processes: A State-of-the-Art Review
Lei, S., Zhao, X., Yu, X., Hu, A., Vukelic, S., Jun, M. B. G., Joe, H.-E., Yao, Y. L., & Shin, Y. C. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4045969 · Cited by 160
Space-selective laser joining of dissimilar transparent materials using femtosecond laser pulses
Watanabe, W., Onda, S., Tamaki, T., Itoh, K., & Nishii, J. (2006) · Applied Physics Letters · doi:10.1063/1.2221393 · Cited by 159
Selective Functionalization of 3-D Polymer Microstructures
Farrer, R. A., LaFratta, C. N., Li, L., Praino, J., Naughton, M. J., Saleh, B. E. A., Teich, M. C., & Fourkas, J. T. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0583620 · Cited by 158
Ultrafast Fiber Lasers: An Expanding Versatile Toolbox
Chang, G., & Wei, Z. (2020) · iScience · doi:10.1016/j.isci.2020.101101 · Cited by 158
Wu, D. Q., Wu, S., Xu, J., Niu, L., Midorikawa, K., & Sugioka, K. (2014) · Laser & Photonics Review · doi:10.1002/lpor.201400005 · Cited by 154
Formanek, F., Takeyasu, N., Tanaka, T., Chiyoda, K., Ishikawa, A., & Kawata, S. (2006) · Optics Express · doi:10.1364/opex.14.000800 · Cited by 154
Direct laser writing of volumetric gradient index lenses and waveguides
Ocier, C. R., Richards, C. A., Bacon‐Brown, D., Ding, Q., Kumar, R., Garcia, T. J., van de Groep, J., Song, J., Cyphersmith, A., Rhode, A. R., et al. (2020) · Light Science & Applications · doi:10.1038/s41377-020-00431-3 · Cited by 152
High-aspect 3D two-photon polymerization structuring with widened objective working range (WOW-2PP)
Obata, K., El-Tamer, A., Koch, L., Hinze, U., & Chichkov, B. N. (2013) · Light Science & Applications · doi:10.1038/lsa.2013.72 · Cited by 150
Ablation and cutting of planar silicon devices using femtosecond laser pulses
Bärsch, N., Körber, K., Ostendorf, A., & Tönshoff, K. H. (2003) · Applied Physics A · doi:10.1007/s00339-003-2118-4 · Cited by 149
HEAT TRANSFER IN FEMTOSECOND LASER PROCESSING OF METAL
Chowdhury, I. H., & Xu, X. (2003) · Numerical Heat Transfer Part A Applications · doi:10.1080/716100504 · Cited by 149 · cited 2×
“Ultrafast lasers may be a more practical and effective source for additively manufacturing Tungsten, as the intense peak power is simulated to produce localized temperatures exceeding 4000 K [32].”
BackgroundMarrian, C. R. K., & Tennant, D. M. (2003) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.1600446 · Cited by 149
Wu, C., Christensen, M. S., Savolainen, J.-M., Balling, P., & Zhigilei, L. V. (2015) · Physical Review B · doi:10.1103/physrevb.91.035413 · Cited by 147
Ma, Z., Zhang, Y., Han, B., Chen, Q., & Sun, H. (2018) · Small Methods · doi:10.1002/smtd.201700413 · Cited by 142
Surface Modified Copper Alloy Powder for Reliable Laser-based Additive Manufacturing
Jadhav, S. D., Dhekne, P. P., Dadbakhsh, S., Kruth, J., Humbeeck, J. V., & Vanmeensel, K. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101418 · Cited by 142 · cited 2×
“Additionally, high reflectivity results in a compounded need for greater laser power and risks damage to optical components [75,77].”
BackgroundUltrafast laser manufacturing: from physics to industrial applications
Orazi, L., Romoli, L., Schmidt, M., & Li, L. (2021) · CIRP Annals · doi:10.1016/j.cirp.2021.05.007 · Cited by 138
Parallel direct laser writing of micro-optical and photonic structures using spatial light modulator
Yang, L., El-Tamer, A., Hinze, U., et al. (2015) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2015.02.006 · Cited by 137
Fusion Welding of Glass Using Femtosecond Laser Pulses with High-repetition Rates
Miyamoto, I. (2007) · Journal of Laser Micro/Nanoengineering · doi:10.2961/jlmn.2007.01.0011 · Cited by 136
Bonding of glass with femtosecond laser pulses at high repetition rates
Richter, S., Döring, S., Tünnermann, A., & Nolte, S. (2011) · Applied Physics A · doi:10.1007/s00339-011-6369-1 · Cited by 135
Comparison between ZnO films grown by femtosecond and nanosecond laser ablation
Perrière, J., Millon, É., Seiler, W., et al. (2002) · Journal of Applied Physics · doi:10.1063/1.1426250 · Cited by 134
Kumi, G., Yanez, C. O., Belfield, K. D., & Fourkas, J. T. (2010) · Lab on a Chip · doi:10.1039/b923377f · Cited by 133
Maibohm, C., Silvestre, Ó. F., Borme, J., Sinou, M., Heggarty, K. J., & Nieder, J. B. (2020) · Scientific Reports · doi:10.1038/s41598-020-64955-9 · Cited by 133
Effect of Pressure Relaxation on the Mechanisms of Short-Pulse Laser Melting
Ivanov, D. S., & Zhigilei, L. V. (2003) · Physical Review Letters · doi:10.1103/physrevlett.91.105701 · Cited by 132
Limit of overheating and the threshold behavior in laser ablation
Garrison, B. J., Itina, T., & Zhigilei, L. V. (2003) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.68.041501 · Cited by 129
Fabrication of Polymer Microneedles Using a Two-Photon Polymerization and Micromolding Process
Gittard, S. D., Ovsianikov, A., Monteiro-Riviere, N. A., Lusk, J., Morel, P., Minghetti, P., Lenardi, C., Chichkov, B. N., & Narayan, R. J. (2009) · Journal of Diabetes Science and Technology · doi:10.1177/193229680900300211 · Cited by 128
Roy, N. K., Behera, D., Dibua, O. G., Foong, C. S., & Cullinan, M. A. (2019) · Microsystems & Nanoengineering · doi:10.1038/s41378-019-0116-8 · Cited by 128
Holographic multi-focus 3D two-photon polymerization with real-time calculated holograms
Vizsnyiczai, G., Kelemen, L., & Ormos, P. (2014) · Optics Express · doi:10.1364/oe.22.024217 · Cited by 127
Multiphoton laser direct writing of two-dimensional silver structures
Baldacchini, T., Pons, A.-C., Pons, J., LaFratta, C. N., Fourkas, J. T., Sun, Y., & Naughton, M. J. (2005) · Optics Express · doi:10.1364/opex.13.001275 · Cited by 126
Maruo, S., & Saeki, T. (2008) · Optics Express · doi:10.1364/oe.16.001174 · Cited by 123
Piqué, A., Auyeung, R. C. Y., Kim, H., Charipar, N. A., & Mathews, S. A. (2016) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/49/22/223001 · Cited by 123
Lin, Z., & Zhigilei, L. V. (2006) · Physical Review B · doi:10.1103/physrevb.73.184113 · Cited by 119
Paz, V. F., Emons, M., Obata, K., Ovsianikov, A., Peterhänsel, S., Frenner, K., Reinhardt, C., Chichkov, B. N., Morgner, U., & Osten, W. (2012) · Journal of Laser Applications · doi:10.2351/1.4712151 · Cited by 118
Rode, A. V., Luther‐Davies, B., & Gamaly, E. G. (1999) · Journal of Applied Physics · doi:10.1063/1.370334 · Cited by 117
Femtosecond laser microprinting of biomaterials
Zergioti, I., Karaiskou, A., Papazoglou, D. G., et al. (2005) · Applied Physics Letters · doi:10.1063/1.1906325 · Cited by 116
Laser fabrication of 2D and 3D metal nanoparticle structures and arrays
Kuznetsov, A. I., Kiyan, R. V., & Chichkov, B. N. (2010) · Optics Express · doi:10.1364/oe.18.021198 · Cited by 110
Optically driven micropump with a twin spiral microrotor
Maruo, S., Takaura, A., & Saito, Y. (2009) · Optics Express · doi:10.1364/oe.17.018525 · Cited by 109
Ameloot, R., Roeffaers, M. B. J., Cremer, G. D., Vermoortele, F., Hofkens, J., Sels, B. F., & Vos, D. E. D. (2011) · Advanced Materials · doi:10.1002/adma.201100063 · Cited by 108
Direct Welding between Copper and Glass Substrates with Femtosecond Laser Pulses
Ozeki, Y., Inoue, T., Tamaki, T., et al. (2008) · Applied Physics Express · doi:10.1143/apex.1.082601 · Cited by 106
Local Melting of Glass Material and Its Application to Direct Fusion Welding by Ps-laser Pulses
Miyamoto, I. (2007) · Journal of Laser Micro/Nanoengineering · doi:10.2961/jlmn.2007.01.0002 · Cited by 104
Duan, X., Sun, H., Kaneko, K., & Kawata, S. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.126 · Cited by 103
Fabrication of three-dimensional micro-photonic structures on the tip of optical fibers using SU-8
Williams, H. E., Freppon, D. J., Kuebler, S. M., et al. (2011) · Optics Express · doi:10.1364/oe.19.022910 · Cited by 102
Passive Q-switching and mode-locking for the generation of nanosecond to femtosecond pulses
Penzkofer, А. (1988) · Applied Physics B · doi:10.1007/bf00698653 · Cited by 100
Chen, J., Carter, R., Thomson, R. R., et al. (2015) · Optics Express · doi:10.1364/oe.23.018645 · Cited by 99
Boutopoulos, C., Kalpyris, I., Serpetzoglou, E., et al. (2013) · Microfluidics and Nanofluidics · doi:10.1007/s10404-013-1248-z · Cited by 98
Impulsively actuated jets from thin liquid films for high-resolution printing applications
Brown, M. S., Brasz, C. F., Ventikos, Y., et al. (2012) · Journal of Fluid Mechanics · doi:10.1017/jfm.2012.337 · Cited by 98
Optical 3D printing: bridging the gaps in the mesoscale
Jonušauskas, L., Juodkazis, S., & Malinauskas, M. (2018) · Journal of Optics · doi:10.1088/2040-8986/aab3fe · Cited by 96
Ultrafast laser micromachining of 3C-SiC thin films for MEMS device fabrication
Pecholt, B., Vendan, M., Dong, Y., & Molian, P. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1223-5 · Cited by 95 · cited 1×
“Virtually any material can be ablated by ultrafast lasers, with applications in, but not limited to, metal [52], semiconductor [53], dielectric [54], and bone [55] micromachining, thin film machining [56], microfluidic structure fabrication [57], microelectromechanical systems (MEMS) device manufacturing [58], laser-i…”
BackgroundLewis, L. J., & Pérez, D. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.07.116 · Cited by 95
Dong, X., Zhao, Z., & Duan, X. (2007) · Applied Physics Letters · doi:10.1063/1.2789661 · Cited by 93
Direct welding of glass and metal by 1 kHz femtosecond laser pulses
Zhang, G., & Cheng, G. (2015) · Applied Optics · doi:10.1364/ao.54.008957 · Cited by 93
A femtosecond laser-induced two-photon photopolymerization technique for structuring microlenses
Malinauskas, M., Gilbergs, H., Žukauskas, A., Purlys, V., Paipulas, D., & Gadonas, R. A. (2010) · Journal of Optics · doi:10.1088/2040-8978/12/3/035204 · Cited by 92
Li, J., Fejes, P., Lorenser, D., Quirk, B. C., Noble, P. B., Kirk, R. W., Orth, A., Wood, F. M., Gibson, B. C., Sampson, D. D., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-32407-0 · Cited by 90
Campagnoli, M. R., Galati, M., & Saboori, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.10.038 · Cited by 89
Sakellari, I., Gaidukevičiūtė, A., Giakoumaki, A. N., Gray, D. H., Fotakis, C., Farsari, M., Vamvakaki, M., Reinhardt, C., Ovsianikov, A., & Chichkov, B. N. (2010) · Applied Physics A · doi:10.1007/s00339-010-5864-0 · Cited by 85
Kirner, S. V., Hermens, U., Mimidis, A., et al. (2017) · Applied Physics A · doi:10.1007/s00339-017-1317-3 · Cited by 84
Low-loss waveguides in ultrafast laser-deposited As_2S_3 chalcogenide films
Zakery, A., Ruan, Y., Rode, A. V., et al. (2003) · Journal of the Optical Society of America B · doi:10.1364/josab.20.001844 · Cited by 82
Response of GaAs to fast intense laser pulses
Graves, J. S., & Allen, R. (1998) · Physical review. B, Condensed matter · doi:10.1103/physrevb.58.13627 · Cited by 82 · cited 1×
“The electronic excitation by high-intensity ultrashort pulses that promotes a significant portion of electrons from the valence band (about 10%) may affect the interatomic bonding, such that melting or other phase transformations occur [42,43].”
BackgroundTimashev, P. S., Kuznetsova, D. S., Koroleva, A., Проданец, Н. Н., Deiwick, A., Piskun, Y., Bardakova, K. N., Dzhoyashvili, N. A., Kostjuk, S. V., Вадимовна, З. Е., et al. (2016) · Nanomedicine · doi:10.2217/nnm-2015-0022 · Cited by 82
Zhang, G., Stoian, R., Zhao, W., et al. (2018) · Optics Express · doi:10.1364/oe.26.000917 · Cited by 82
Xie, J., Lu, H., Lu, J., Song, X., Wu, S., & Lei, J. (2021) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2021.126884 · Cited by 77 · cited 2×
“In an effort to reduce manufacturing cost and waste, [88] manufactured Tungsten tiles by directed energy deposition with a nonultrashort pulse, >3000 W source.”
BackgroundEfficient microwelding of glass substrates by ultrafast laser irradiation using a double-pulse train
Sugioka, K., Iida, M., Takai, H., et al. (2011) · Optics Letters · doi:10.1364/ol.36.002734 · Cited by 76
Crack-free conditions in welding of glass by ultrashort laser pulse
Miyamoto, I., Cvecek, K., & Schmidt, M. (2013) · Optics Express · doi:10.1364/oe.21.014291 · Cited by 76
Growth of heteroepitaxial ZnO thin films by femtosecond pulsed-laser deposition
Millon, É., Albert, O., Loulergue, J. C., et al. (2000) · Journal of Applied Physics · doi:10.1063/1.1324679 · Cited by 75
Ablation of metallic targets by high-intensity ultrashort laser pulses
Yang, J., Zhao, Y., Zhang, N., Liang, Y., & Wang, M. (2007) · Physical Review B · doi:10.1103/physrevb.76.165430 · Cited by 74 · cited 1×
“Virtually any material can be ablated by ultrafast lasers, with applications in, but not limited to, metal [52], semiconductor [53], dielectric [54], and bone [55] micromachining, thin film machining [56], microfluidic structure fabrication [57], microelectromechanical systems (MEMS) device manufacturing [58], laser-i…”
BackgroundLee, B. E. J., Exir, H., Weck, A., & Grandfield, K. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.02.119 · Cited by 74
Liu, Y., Meng, J., Zhu, L., Chen, H., Li, Z., Li, S., Wang, D., Wang, Y., & Kosiba, K. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102772 · Cited by 72
Time-resolved microscopic imaging of the laser-induced forward transfer process
Nakata, Y., & OKADA, T. (1999) · Applied Physics A · doi:10.1007/s003390051399 · Cited by 71
Additive manufacturing boosts efficiency of heat transfer components
Neugebauer, R., Müller, B., Gebauer, M., & Töppel, T. (2011) · Assembly Automation · doi:10.1108/01445151111172925 · Cited by 70 · cited 2×
“Additive manufacturing of copper is especially attractive because it enables the production of complex geometries that may improve heat transfer devices and does not require additional manufacturing steps like welding [72,73].”
BackgroundEjection Regimes in Picosecond Laser-Induced Forward Transfer of Metals
Pohl, R., Visser, C. W., Römer, G. R. B. E., Lohse, D., Sun, C., & Veld, B. H. I. ‘. (2015) · Physical Review Applied · doi:10.1103/physrevapplied.3.024001 · Cited by 68
Femtosecond laser additive manufacturing of iron and tungsten parts
Nie, B. S., Yang, L.-M., Huang, H., Bai, S., Wan, P., & Liu, J. (2015) · Applied Physics A · doi:10.1007/s00339-015-9070-y · Cited by 67 · cited 2×
“Femtosecond selective laser melting is feasible, as shown in [91].”
BackgroundPhotoablation with sub-10 fs laser pulses
Lenzner, M., Krausz, F., Krüger, J., et al. (2000) · Applied Surface Science · doi:10.1016/s0169-4332(99)00432-8 · Cited by 67
Challenges in Three-Dimensional Printing of High-Conductivity Copper
El-Wardany, T. I., She, Y., Jagdale, V. N., et al. (2018) · Journal of Electronic Packaging · doi:10.1115/1.4039974 · Cited by 66
Worts, N., Jones, J. R., & Squier, J. A. (2018) · Optics Communications · doi:10.1016/j.optcom.2018.08.055 · Cited by 65
Qi, J., Wang, Z., Xu, J., Lin, Z., Li, X., Chu, W., & Cheng, Y. (2018) · Optics Express · doi:10.1364/oe.26.029669 · Cited by 65
Cojoc, G., Liberale, C., Candeloro, P., Gentile, F., Das, G., Angelis, F. D., & Fabrizio, E. M. D. (2009) · Microelectronic Engineering · doi:10.1016/j.mee.2009.12.046 · Cited by 64
Laser Induced Forward Transfer of metals by temporally shaped femtosecond laser pulses
Klini, A., Loukakos, P. A., Gray, D. H., Manousaki, A., & Fotakis, C. (2008) · Optics Express · doi:10.1364/oe.16.011300 · Cited by 64
Ciuca, O. P., Carter, R., Prangnell, P. B., et al. (2016) · Materials Characterization · doi:10.1016/j.matchar.2016.08.013 · Cited by 64
Thermodynamic and stress analysis of laser-induced forward transfer of metals
Shugaev, M. V., & Bulgakova, N. M. (2010) · Applied Physics A · doi:10.1007/s00339-010-5767-0 · Cited by 63
McCann, R., Roy, S. S., Papakonstantinou, P., et al. (2005) · Journal of Applied Physics · doi:10.1063/1.1874300 · Cited by 63
Femtosecond laser sintering of copper nanoparticles
Cheng, C., & Chen, J. K. (2016) · Applied Physics A · doi:10.1007/s00339-016-9814-3 · Cited by 63 · cited 1×
“Femtosecond lasers may address challenges posed by copper’s material properties by sintering of Cu nanoparticle ink [81].”
BackgroundBaldacchini, T., Zimmerley, M., Kuo, C.-H., Potma, E. O., & Zadoyan, R. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp9058998 · Cited by 61
Laser forward transfer based on a spatial light modulator
Auyeung, R. C. Y., Kim, H., Charipar, N. A., et al. (2010) · Applied Physics A · doi:10.1007/s00339-010-6054-9 · Cited by 60
Laser‐made 3D Auxetic Metamaterial Scaffolds for Tissue Engineering Applications
Flamourakis, G., Spanos, I., Vangelatos, Z., et al. (2020) · Macromolecular Materials and Engineering · doi:10.1002/mame.202000238 · Cited by 60
Reinforced direct bonding of optical materials by femtosecond laser welding
Hélie, D., Bégin, M., Lacroix, F., & Vallée, R. (2012) · Applied Optics · doi:10.1364/ao.51.002098 · Cited by 57
Sun, Q., Juodkazis, S., Murazawa, N., Mizeikis, V., & Misawa, H. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/3/035004 · Cited by 57
Ullsperger, T., Liu, D., Yürekli, B., Matthäus, G., Schade, L., Seyfarth, B., Kohl, H. P., Ramm, R., Rettenmayr, M., & Nolte, S. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102085 · Cited by 57 · cited 6×
“A few examples are shown in Figure 5 [93,94,99].”
BackgroundInfluentialA comparative schlieren imaging study between ns and sub-ps laser forward transfer of Cr
Zergioti, I., Papazoglou, D. G., Karaiskou, A., et al. (2003) · Applied Surface Science · doi:10.1016/s0169-4332(02)01363-6 · Cited by 56
Time-resolved shadowgraph imaging of femtosecond laser-induced forward transfer of solid materials
Feinaeugle, M., Alloncle, A., Delaporte, P. C., Sones, C. L., & Eason, R. W. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.04.101 · Cited by 56
Sutter, D. H., Jung, I. D., Käertner, F. X., Matuschek, N., Morier-Genoud, F., Scheuer, V., Tilsch, M., Tschudi, T. T., & Keller, U. (1998) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/2944.686720 · Cited by 56 · cited 1×
“To generate the ultrashort pulses of interest, down to single-digit femtosecond durations, mode locking is the universal technique [11].”
MethodFeinaeugle, M., Pohl, R., Bor, T. C., et al. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.09.028 · Cited by 56
Li, Y.-C., Cheng, L.-C., Chang, C.-Y., Lien, C.-H., Campagnola, P. J., & Chen, S.-J. (2012) · Optics Express · doi:10.1364/oe.20.019030 · Cited by 53
Bonse, J., Höhm, S., Koter, R., et al. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.019 · Cited by 52
Roy, N. K., Dibua, O. G., Jou, W., He, F., Jeong, J., Wang, Y., & Cullinan, M. A. (2017) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4038455 · Cited by 51 · cited 2×
“requirements for femtosecond lasers are lower than CW, evidence shows it results in a smaller processing window that makes consistent quality difficult to achieve [85,86].”
BackgroundPicosecond laser welding of glasses with a large gap by a rapid oscillating scan
Chen, H., Deng, L., Duan, J., & Zeng, X. (2019) · Optics Letters · doi:10.1364/ol.44.002570 · Cited by 51
Pulsed laser deposition of ZnO thin films using a femtosecond laser
Okoshi, M., Higashikawa, K., & Hanabusa, M. (2000) · Applied Surface Science · doi:10.1016/s0169-4332(99)00392-x · Cited by 49
Tičkūnas, T., Perrenoud, M., Butkus, S., Gadonas, R. A., Rekštytė, S., Malinauskas, M., Paipulas, D., Bellouard, Y., & Sirutkaitis, V. (2017) · Optics Express · doi:10.1364/oe.25.026280 · Cited by 49
Ultrashort Pulse Laser Welding - A New Approach for High- Stability Bonding of Different Glasses
Richter, S., Nolte, S., & Tünnermann, A. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.073 · Cited by 48
Research works printed but not linked: 5
- Rullière, C. (2013). Femtosecond Laser Pulses: Principles and Experiments, Springer.
- Haglund, R.F.J. (2006). 3D Laser Microfabrication, Wiley-VCH.
- Piqué, A., and Charipar, K.M. (2021). Handbook of Laser Micro- and Nano-Engineering, Springer International Publishing.
- Gamaly, E.G., Rode, A.v., and Luther-Davies, B. (2006). Pulsed Laser Deposition of Thin Films: Applications-Led Growth of Functional Materials, John Wiley & Sons, Ltd.
- Juodkazis, 2018, Synchronization of Linear Stages and Galvo-Scanners for Efficient Direct Laser Fabrication of Polymeric 3D Meso-Scale Structures, Proc. SPIE, 10523, 132
Cited by
Alontseva, D. L., Azamatov, B. N., Safarova, Y., et al. (2023) · Coatings · doi:10.3390/coatings13071175 · Cited by 37
Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers
Han, J., Liu, C., Bradford-Vialva, R. L., Klosterman, D., & Cao, L. (2023) · Materials · doi:10.3390/ma16134636 · Cited by 44
“This surge in growth can be attributed to the rapid development of advanced technologies [23,24].”
BackgroundAdditive manufacturing processing with ultra-short-pulse lasers
Soleimani, M., Nankali, M., Duley, W. W., Zhou, Y., & Peng, P. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.10.006 · Cited by 29
Dynamic spatial beam shaping for ultrafast laser processing: a review
Mauclair, C., Najih, B., Comte, V., Bourquard, F., & Delaigue, M. (2025) · Opto-Electronic Science · doi:10.29026/oes.2025.250002 · Cited by 37
Current status and potential strategies for crack-free tungsten by laser powder bed fusion: A review
Ji, L., Wei, S., Wang, Z., Zhang, Y., Radhamani, A. V., & Ramakrishna, S. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.10.020 · Cited by 19
Metadata
- Authors
- Saunders, J., Elbestawi, M., & Fang, Q.
- Affiliations
- McMaster University (CA)
- Department of Mechanical Engineering, McMaster University, Hamilton, ON L8S 4L8, Canada
- Corresponding author
- Fang, Qiyin
- ORCID
- Fang, Qiyin
- Venue
- Journal of Manufacturing and Materials Processing
- Publisher
- MDPI AG
- Published
- 2023-05-05
- Volume
- 7
- Issue
- 3
- Pages
- 89
- ISSN
- 2504-4494 (ISSN-L)
- OpenAlex
- W4372285931
- Semantic Scholar
- a820bcde57fd446865a304fe1bf7b032435342ab
- Cited by
- 35
- References
- 296
- Citations by year
- 2026: 12 · 2025: 9 · 2024: 10 · 2023: 3
- FWCI
- 3.47
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Journal of Manufacturing and Materials Processing (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Natural Science and Engineering Research Council of Canada (RGPIN-2019-07127, 2018IT100212)
- Foshan Science and Technology Innovation Project (RGPIN-2019-07127, 2018IT100212)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- ultrafast lasers, laser additive manufacturing, laser powder bed fusion, selective laser sintering, multiphoton lithography, laser-induced forward transfer, pulsed laser deposition, laser welding, process monitoring and control, hybrid production systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.