Human–Robot Collaboration Trends and Safety Aspects: A Systematic Review
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Smart manufacturing and smart factories depend on automation and robotics, whereas human–robot collaboration (HRC) contributes to increasing the effectiveness and productivity of today’s and future factories. Industrial robots especially in HRC settings can be hazardous if safety is not addressed properly. In this review, we look at the collaboration levels of HRC and what safety actions have been used to address safety. One hundred and ninety-three articles were identified from which, after screening and eligibility stages, 46 articles were used for the extraction stage. Predefined parameters such as: devices, algorithms, collaboration level, safety action, and standards used for HRC were extracted. Despite close human and robot collaboration, 25% of all reviewed studies did not use any safety actions, and more than 50% did not use any standard to address safety issues. This review shows HRC trends and what kind of functionalities are lacking in today’s HRC systems. HRC systems can be a tremendously complex process; therefore, proper safety mechanisms must be addressed at an early stage of development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Social robots for education: a review.
Belpaeme, T., Kennedy, J., Ramachandran, A., Scassellati, B., & Tanaka, F. (2018) · Science Robotics · doi:10.1126/scirobotics.aat5954 · Cited by 1,558
Human–Robot Collaboration in Manufacturing Applications: A Review
Matheson, E., Minto, R., Zampieri, E. G. G., Faccio, M., & Rosati, G. (2019) · Robotics · doi:10.3390/robotics8040100 · Cited by 668
Cited by
Smart industrial robot control trends, challenges and opportunities within manufacturing
Arents, J., & Greitans, M. (2022) · Applied Sciences · doi:10.3390/app12020937 · Cited by 338
Self-citationAI apology: a critical review of apology in AI systems
Harland, H., Dazeley, R., Senaratne, H., Vamplew, P., Cruz, F., & Nakisa, B. (2025) · Artificial Intelligence Review · doi:10.1007/s10462-025-11305-8 · Cited by 19
Metadata
- Authors
- Arents, J., Abolins, V., Judvaitis, J., Vismanis, O., Oraby, A., & Ozols, K.
- Venue
- Journal of Sensor and Actuator Networks
- Publisher
- MDPI AG
- Published
- 2021-07-13
- Volume
- 10
- Issue
- 3
- Pages
- 48
- ISSN
- 2224-2708 (ISSN-L)
- OpenAlex
- W3181223963
- Cited by
- 161
- References
- 2
- FWCI
- 3.94
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.