The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Anisotropy of Photopolymer Parts Made by Digital Light Processing
Open accessAbstract
Digital light processing (DLP) is an accurate additive manufacturing (AM) technology suitable for producing micro-parts by photopolymerization. As most AM technologies, anisotropy of parts made by DLP is a key issue to deal with, taking into account that several operational factors modify this characteristic. Design for this technology and photopolymers becomes a challenge because the manufacturing process and post-processing strongly influence the mechanical properties of the part. This paper shows experimental work to demonstrate the particular behavior of parts made using DLP. Being different to any other AM technology, rules for design need to be adapted. Influence of build direction and post-curing process on final mechanical properties and anisotropy are reported and justified based on experimental data and theoretical simulation of bi-material parts formed by fully-cured resin and partially-cured resin. Three photopolymers were tested under different working conditions, concluding that post-curing can, in some cases, correct the anisotropy, mainly depending on the nature of photopolymer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
High-resolution tomographic volumetric additive manufacturing
Loterie, D., Delrot, P., & Moser, C. (2020) · Nature Communications · doi:10.1038/s41467-020-14630-4 · Cited by 461
Unkovskiy, A., Bui, P. H.-B., Schille, C., Geis-Gerstorfer, J., Huettig, F., & Spintzyk, S. (2018) · Dental Materials · doi:10.1016/j.dental.2018.09.011 · Cited by 378
Vat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
Metadata
- Authors
- Monzón, M., Ortega, Z., Hernández, A., Paz, R., & Ortega, F.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2017-01-13
- Volume
- 10
- Issue
- 1
- Pages
- 64
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2577423602
- Cited by
- 168
- References
- 1
- FWCI
- 7.94
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Anisotropy of Photopolymer Parts Made by Digital Light Processing. https://app.cochat.ai/papers/10.3390/ma10010064
- The paper
- Monzón, M., Ortega, Z., Hernández, A., Paz, R., & Ortega, F. (2017). Anisotropy of Photopolymer Parts Made by Digital Light Processing. Materials. https://doi.org/10.3390/ma10010064
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.