Effect of Relative Humidity on Adsorption Breakthrough of CO2 on Activated Carbon Fibers
Open accessThe DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Abstract
Microporous activated carbon fibers (ACFs) were developed for CO2 capture based on potassium hydroxide (KOH) activation and tetraethylenepentamine (TEPA) amination. The material properties of the modified ACFs were characterized using several techniques. The adsorption breakthrough curves of CO2 were measured and the effect of relative humidity in the carrier gas was determined. The KOH activation at high temperature generated additional pore networks and the intercalation of metallic K into the carbon matrix, leading to the production of mesopore and micropore volumes and providing access to the active sites in the micropores. However, this treatment also resulted in the loss of nitrogen functionalities. The TEPA amination has successfully introduced nitrogen functionalities onto the fiber surface, but its long-chain structure blocked parts of the micropores and, thus, made the available surface area and pore volume limited. Introduction of the power of time into the Wheeler equation was required to fit the data well. The relative humidity within the studied range had almost no effects on the breakthrough curves. It was expected that the concentration of CO2 was high enough so that the impact on CO2 adsorption capacity lessened due to increased relative humidity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The moisture molecule could occupy the CO2 adsorption site on the surface and in the micropores of biochar [49].”
From Direct air capture of CO2 by KOH-activated bamboo biochar (2022) · cites this paper as [49]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726 · cited 2×
“The fact that KOH–ACFC had the largest fine pore volumes could be due to a series of processes [36,38]: The chemical activation resulted in the generation of pore network, the physical activation contributed to the further development of porosity through carbon gasification, and the intercalation of metallic K into th…”
BackgroundPost-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889 · cited 1×
“In addition, the MOFs had high capacity of CO2 at high pressure, however, their capacities were lower at atmospheric pressures [27].”
BackgroundAdsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943 · cited 1×
“Several possible adsorbents, including activated carbon fibers (ACFs) [4], activated carbon [8], zeolite [9], silica adsorbents [10], metal organic frameworks (MOFs) [11], or carbon nanotubes (CNTs) [12], have”
BackgroundNitrogen‐Containing Hydrothermal Carbons with Superior Performance in Supercapacitors
Zhao, L., Fan, L., Zhou, M., Guan, H., Qiao, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.201002647 · Cited by 893
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758 · cited 1×
“Although various aminopropylsilanes have been grafted onto mesoporous silicas to produce excellent adsorption capacities of CO2 [28], the costs of these aminopropylsilanes and mesoporous silicas (adsorbents) were too high for large-scale applications in CO2 capture [29].”
BackgroundThe outlook for improved carbon capture technology
Rubin, E. S., Mantripragada, H., Marks, A., Versteeg, P., & Kitchin, J. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.003 · Cited by 576
Qi, G., Wang, Y., Estevez, L., Duan, X., Anako, N., Park, A.-H. A., Li, W., Jones, C. W., & Giannelis, E. P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00213e · Cited by 507 · cited 5×
“TEPA was featured with higher amino-groups content and l ss viscous nature compared to several amines [13,15].”
BackgroundInfluentialProduction and adsorption characteristics of MAXSORB: High-surface-area active carbon
Otowa, T., Tanibata, R., & Itoh, M. (1993) · Gas Separation & Purification · doi:10.1016/0950-4214(93)80024-q · Cited by 477 · cited 1×
“The fact that KOH–ACFC had the largest fine pore volumes could be due to a series of processes [36,38]: The chemical activation resulted in the generation of pore network, the physical activation contributed to the further development of porosity through carbon gasification, and the intercalation of metallic K into th…”
BackgroundActivated carbon fiber: Fundamentals and applications
Suzuki, M. (1994) · Carbon · doi:10.1016/0008-6223(94)90075-2 · Cited by 465 · cited 1×
“In addition, according to the study of Suzuki [34], the adsorption isotherms of water vapor on ACFs at 25 ◦C showed minimal adsorption at relative humidity values greater than 40%.”
BackgroundImportance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415 · cited 1×
“It is believed that KOH activation generated a high fraction of fine pores (<1 nm) [39].”
BackgroundDreisbach, F., Staudt, R., & Keller, J. U. (1999) · Adsorption · doi:10.1023/a:1008914703884 · Cited by 383
Chiang, Y.-C., Lin, W.-H., & Chang, Y.-C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2010.09.110 · Cited by 349 · cited 1×
“Four different O functionalities and the contribution of chemisorbed water can be identified [45].”
BackgroundSelf-citationCapture of CO2 from high humidity flue gas by vacuum swing adsorption with zeolite 13X
Li, G., Xiao, P., Webley, P., Zhang, J., Singh, R., & Marshall, M. (2008) · Adsorption · doi:10.1007/s10450-007-9100-y · Cited by 348 · cited 1×
“It has been reported that water vapor would be competitively adsorbed on zeolite and blocked the access for CO2 [26].”
BackgroundPhotochemical Removal of Mercury from Flue Gas
Granite, E. J., & Pennline, H. W. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020251b · Cited by 322 · cited 3×
“According to the references [5,35], the typical untreated flue gas compositions from a power plant burning low sulfur coal contained about 15– 16% of CO2.”
BackgroundRemoval of CO2Greenhouse Gas by Ammonia Scrubbing
Bai, H., & Yeh, A. C. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960748j · Cited by 312 · cited 1×
“Various CO2 capture technologies, such as absorption, adsorption, cryogenics, and membranes have been widely investigated [4,6].”
BackgroundCapture of CO2 from flue gas via multiwalled carbon nanotubes
Su, F., Lu, C., Cnen, W., Bai, H., & Hwang, J. F. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.01.007 · Cited by 311 · cited 1×
“Several possible adsorbents, including activated carbon fibers (ACFs) [4], activated carbon [8], zeolite [9], silica adsorbents [10], metal organic frameworks (MOFs) [11], or carbon nanotubes (CNTs) [12], have”
BackgroundXu, X., Song, C., Miller, B. G., & Scaroni, A. W. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.002 · Cited by 308
Pittman, C. U., He, G.-R., Wu, B., & Gardner, S. D. (1997) · Carbon · doi:10.1016/s0008-6223(97)89608-x · Cited by 284 · cited 2×
“On the other hand, the TEPA amination resulted in the increase of –OH groups and C=O, which indicated the grafting of TEPA molecules [46].”
BackgroundHigh-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Post combustion CO2 capture by carbon fibre monolithic adsorbents
Thiruvenkatachari, R., Su, S., An, H., & Yu, X. X. (2009) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.05.003 · Cited by 251
Improved immobilized carbon dioxide capture sorbents
Gray, M. L., Soong, Y., Champagne, K. J., Pennline, H., Baltrus, J. P., Stevens, R. W., Khatri, R., Chuang, S. S. C., & Filburn, T. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.005 · Cited by 250 · cited 1×
“Several possible adsorbents, including activated carbon fibers (ACFs) [4], activated carbon [8], zeolite [9], silica adsorbents [10], metal organic frameworks (MOFs) [11], or carbon nanotubes (CNTs) [12], have”
BackgroundDetermination of the optimal pore size for improved CO2 adsorption in activated carbon fibers
Lee, S.-Y., & Park, S.-J. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.09.018 · Cited by 239 · cited 11×
“Activated carbon fiber Co: 15%, T: 25 ◦C, RH: 0% 35~70 Lee and Park [4]”
BackgroundInfluentialMonoethanol Amine Modified Zeolite 13X for CO2Adsorption at Different Temperatures
Jadhav, P. D., Chatti, R. V., Biniwale, R. B., Labhsetwar, N. K., Devotta, S., & Rayalu, S. S. (2007) · Energy & Fuels · doi:10.1021/ef070038y · Cited by 236 · cited 1×
“Several possible adsorbents, including activated carbon fibers (ACFs) [4], activated carbon [8], zeolite [9], silica adsorbents [10], metal organic frameworks (MOFs) [11], or carbon nanotubes (CNTs) [12], have”
BackgroundAdsorption onto activated carbon fibers: Application to water and air treatments
Brasquet, C., & Le Cloirec, P. (1997) · Carbon · doi:10.1016/s0008-6223(97)00079-1 · Cited by 195 · cited 3×
“Brasquet and Cloirec [31] observed that the main resistance to the mass transfer for adsorption on ACFs might be due to the diffusion through micropores within the ACFs and the effect of the external mass transfer was insignificant.”
BackgroundInfluentialPost-combustion carbon dioxide capture: Evolution towards utilization of nanomaterials
Lee, Z. H., Lee, K. T., Bhatia, S., & Mohamed, A. R. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.077 · Cited by 166
Surface modifications of carbonaceous materials for carbon dioxide adsorption: A review
Chiang, Y.-C., & Juang, R.-S. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.12.014 · Cited by 166
Self-citationCarbon dioxide recovery by vacuum swing adsorption
Chou, C.-T., & Chen, C. Y. (2004) · Separation and Purification Technology · doi:10.1016/j.seppur.2003.12.009 · Cited by 150 · cited 2×
“According to the references [5,35], the typical untreated flue gas compositions from a power plant burning low sulfur coal contained about 15– 16% of CO2.”
BackgroundRemoval of VOCs from humidified gas streams using activated carbon cloth
Cal, M. P., Rood, M. J., & Larson, S. M. (1996) · Gas Separation & Purification · doi:10.1016/0950-4214(96)00004-7 · Cited by 124 · cited 1×
“It was expected that the interactions between CO2 molecules and the ACFs were stronger than those between the water vapor molecules and the ACFs such that the competitive adsorption of water vapor on ACFs was insignificant [49,50].”
BackgroundPerformance of fixed-bed catalytic reactors with poison in the feed
Wheeler, A. (1969) · Journal of Catalysis · doi:10.1016/0021-9517(69)90404-7 · Cited by 117 · cited 1×
“The Wheeler equation was originally used to describe the behavior of adsorbable poison gas on catalytic reactors [23] and modified by Jonas and Svirbely [17] to study tetrachloride and chloroform adsorption on activated carbon.”
MethodEffects of water vapour on CO2 capture with vacuum swing adsorption using activated carbon
Xu, D., Xiao, P., Zhang, J., Li, G., Xiao, G., Webley, P. A., & Zhai, Y. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.080 · Cited by 112 · cited 1×
“Several possible adsorbents, including activated carbon fibers (ACFs) [4], activated carbon [8], zeolite [9], silica adsorbents [10], metal organic frameworks (MOFs) [11], or carbon nanotubes (CNTs) [12], have”
BackgroundDesigned amyloid fibers as materials for selective carbon dioxide capture
Li, D., Furukawa, H., Deng, H., Liu, C., Yaghi, O. M., & Eisenberg, D. S. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1321797111 · Cited by 108
A novel process for CO2/CH4 gas separation on activated carbon fibers—electric swing adsorption
Moon, S.-H., & Shim, J. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.12.052 · Cited by 103 · cited 4×
“Co: 100%, T: 25 °C, RH: 0% 31 Moon and Shim [54] Activated carbon fiber -”
BackgroundInfluentialSuperior carbon-based CO2 adsorbents prepared from poplar anthers
Song, J., Shen, W., Wang, J., & Fan, W. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.024 · Cited by 99 · cited 1×
“43 and 1 nm and high N content showed high CO2 adsorption capacity at one bar and 25 ◦C [14].”
BackgroundChiang, Y., Lee, C.-Y., & Lee, H.-C. (2006) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2006.03.007 · Cited by 91 · cited 2×
“Figure 4 shows the results of curve-fitting for the high-resolution XPS N1s spectra for all samples, which found that the N1s spectra were decomposed into at most six identified components [47].”
BackgroundSelf-citationPreparation of porous doped carbons and the high performance in electrochemical capacitors
Wang, H., Gao, Q., & Hu, J. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.12.007 · Cited by 87
Prediction of breakthrough curves for adsorption on activated carbon fibers in a fixed bed
Cheng, T., Jiang, Y., Zhang, Y., & Liu, S. (2004) · Carbon · doi:10.1016/j.carbon.2004.07.021 · Cited by 76 · cited 1×
“[32] proposed a new mathematical model to predict the breakthrough curves of volatile organic compounds on ACFs fixed beds, where both pore diffusion and surface diffusion were considered.”
BackgroundThe Wheeler?Jonas equation: a versatile tool for the prediction of carbon bed breakthrough times
Lodewyckx, P., Wood, G. O., & Ryu, S. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.016 · Cited by 71 · cited 2×
“Several theoretical or empirical equations have been proposed to fit the breakthrough curves in fixed-bed adsorption, such as the Wheeler equation [17,18] or the Wheeler–Jonas equation [19], the modified Wheeler equation [20], the Mecklenburg equation [21], and the Yoon and Nelson equation [22].”
BackgroundMethodHsiao, H., Huang, C.-M., Hsu, M.-Y., & Chen, H. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.08.006 · Cited by 65 · cited 1×
“Although various aminopropylsilanes have been grafted onto mesoporous silicas to produce excellent adsorption capacities of CO2 [28], the costs of these aminopropylsilanes and mesoporous silicas (adsorbents) were too high for large-scale applications in CO2 capture [29].”
BackgroundAdsorption rate coefficients for gases and vapors on activated carbons
Wood, G. O., & Stampfer, J. F. (1993) · Carbon · doi:10.1016/0008-6223(93)90172-7 · Cited by 61 · cited 1×
“In order to estimate carbon bed breakthrough time (service time) for a given gas or vapor which is removed from flowing air by physical adsorption, both the adsorption capacity and adsorption rate need to be known [16].”
BackgroundKlotz, I. M. (1946) · Chemical Reviews · doi:10.1021/cr60123a003 · Cited by 60 · cited 1×
“Several theoretical or empirical equations have been proposed to fit the breakthrough curves in fixed-bed adsorption, such as the Wheeler equation [17,18] or the Wheeler–Jonas equation [19], the modified Wheeler equation [20], the Mecklenburg equation [21], and the Yoon and Nelson equation [22].”
BackgroundJonas, L. A. (1972) · Journal of Catalysis · doi:10.1016/0021-9517(72)90128-5 · Cited by 59 · cited 2×
“Several theoretical or empirical equations have been proposed to fit the breakthrough curves in fixed-bed adsorption, such as the Wheeler equation [17,18] or the Wheeler–Jonas equation [19], the modified Wheeler equation [20], the Mecklenburg equation [21], and the Yoon and Nelson equation [22].”
BackgroundMethodAdsorption of carbon dioxide on amine-modified TiO2 nanotubes
Song, F., Zhao, Y., & Zhong, Q. (2013) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(12)60097-7 · Cited by 54 · cited 3×
“TEPA was featured with higher amino-groups content and l ss viscous nature compared to several amines [13,15].”
BackgroundWood, G. O. (2002) · Carbon · doi:10.1016/s0008-6223(02)00031-3 · Cited by 51 · cited 1×
“Wood [24], however, introduced the skew parameter to quantify the effect of unsymmetrical breakthrough curves.”
BackgroundXu, D. Y., Zhang, J., Li, G., Xiao, P., Webley, P. A., & Yu-chun, Z. (2011) · Journal of Fuel Chemistry and Technology · doi:10.1016/s1872-5813(11)60016-9 · Cited by 49 · cited 1×
“In contrast to the poor adsorption capacity of CO2 on zeolites in the presence of moisture, the carbon materials were relatively insensitive to moisture [30] and were suitable candidates for CO2 capture in flue gas.”
BackgroundLee, M.-S., & Park, S. (2015) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2015.01.031 · Cited by 44 · cited 7×
“Co: 15%, T: 25 °C, RH: 0% 24 Dreisbach et al. [51] Silica-coated multi-walled carbon nanotubes Polyethylene -imine Co: 15%, T: 25 °C, RH: 0% 29 Lee and Park [52] Multi-walled carbon nanotubes 3-aminopropyl-trie thoxysilane Co: 15%, T: 20 °C, RH: 0% 43 Su et al. [12] Mesoporous alumina -”
InfluentialN-doped mesoporous alumina for adsorption of carbon dioxide
Thote, J. A., Chatti, R. V., Iyer, K. S., Kumar, V., Valechha, A., Labhsetwar, N. K., Biniwale, R. B., Yenkie, M. K. N., & Rayalu, S. S. (2012) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(11)61022-x · Cited by 41
Wood, G. O. (2002) · Carbon · doi:10.1016/s0008-6223(01)00185-3 · Cited by 33 · cited 4×
“This appeared that the adsorption rate was surface adsorption limited because the active sites were occupied by water vapor molecules or it was pore diffusion limited such that the adsorption rate slowed down and the values of kv decreased [18].”
BackgroundMethodInfluentialLodewyckx, P., & Verhoeven, L. (2003) · Carbon · doi:10.1016/s0008-6223(03)00052-6 · Cited by 29 · cited 1×
“Several theoretical or empirical equations have been proposed to fit the breakthrough curves in fixed-bed adsorption, such as the Wheeler equation [17,18] or the Wheeler–Jonas equation [19], the modified Wheeler equation [20], the Mecklenburg equation [21], and the Yoon and Nelson equation [22].”
BackgroundTsai, W., Chang, C.-K., Ho, C. Y., & Chen, L. Y. (1999) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1999.6192 · Cited by 22 · cited 1×
“Several theoretical or empirical equations have been proposed to fit the breakthrough curves in fixed-bed adsorption, such as the Wheeler equation [17,18] or the Wheeler–Jonas equation [19], the modified Wheeler equation [20], the Mecklenburg equation [21], and the Yoon and Nelson equation [22].”
BackgroundZhou, C., Yuren, J., Xu, H., Feng, S., Zhou, G., Junfu, L., & Xu, J. (2010) · Journal of Radioanalytical and Nuclear Chemistry · doi:10.1007/s10967-010-0905-x · Cited by 12 · cited 1×
“[25] used the Wheeler equation to discuss xenon breakthrough on activated carbon, and found that the adsorption rate coefficient was proportional to the values of flow rate, but was independent of that of temperature and inlet concentration.”
MethodA novel carbon fiber based porous carbon monolith
Lab., T. (. S. O. R. N., Burchell, T. D., Klett, J., & Weaver, C. E. (1995) · doi:10.2172/115403 · Cited by 5 · cited 1×
“6 nm, corresponding to the optimum pore width for CO2 adsorption in literature [40], though Thiruvenkatachari et al.”
Background
Research works printed but not linked: 1
- Gregg, S.J., and Sing, K.S.W. (1982). Adsorption, Surface Area and Porosity, Academic Press.
Cited by
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
A high adsorption capacity bamboo biochar for CO2 capture for low temperature heat utilization
Ji, Y., Zhang, C., Zhang, X. J., Xie, P. F., Wu, C., & Jiang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121131 · Cited by 140
Self-citationAdsorption of CO2 on KOH activated carbon adsorbents: Effect of different mass ratios
Singh, J., Bhunia, H., & Basu, S. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109457 · Cited by 111
Direct air capture of CO2 by KOH-activated bamboo biochar
Zhang, C., Sun, S., He, S., & Wu, C. (2022) · Journal of the Energy Institute · doi:10.1016/j.joei.2022.10.017 · Cited by 108
Self-citationSingh, J., Basu, S., & Bhunia, H. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.02.031 · Cited by 91
Metadata
- Authors
- Chiang, Y.-C., Chen, Y.-J., & Wu, C.-Y.
- Affiliations
- Yuan Ze University (TW)
- Corresponding author
- Chiang, Yu-Chun
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2017-11-11
- Volume
- 10
- Issue
- 11
- Pages
- 1296
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC5706243
- OpenAlex
- W2767396918
- Cited by
- 77
- References
- 51
- Citations by year
- 2026: 10 · 2025: 10 · 2024: 8 · 2023: 10 · 2022: 17 · 2021: 7 · 2020: 6 · 2019: 6 · 2018: 3
- FWCI
- 3.19
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry of Science and Technology, Taiwan (MOST104-2221-E155-002, 2221-E-155, MOST 104?)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Keywords
- activated carbon fiber, CO2 adsorption, relative humidity, adsorption breakthrough curves, CO2 capture, KOH activation, nitrogen functionalization, microporous carbon, potassium intercalation, mesopores
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.