The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
A Review on Low-Grade Thermal Energy Harvesting: Materials, Methods and Devices
Open accessAbstract
Combined rejected and naturally available heat constitute an enormous energy resource that remains mostly untapped. Thermal energy harvesting can provide a cost-effective and reliable way to convert available heat into mechanical motion or electricity. This extensive review analyzes the literature covering broad topical areas under solid-state low temperature thermal energy harvesting. These topics include thermoelectricity, pyroelectricity, thermomagneticity, and thermoelasticity. For each topical area, a detailed discussion is provided comprising of basic physics, working principle, performance characteristics, state-of-the-art materials, and current generation devices. Technical advancements reported in the literature are utilized to analyze the performance, identify the challenges, and provide guidance for material and mechanism selection. The review provides a detailed analysis of advantages and disadvantages of each energy harvesting mechanism, which will provide guidance towards designing a hybrid thermal energy harvester that can overcome various limitations of the individual mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Thin-film thermoelectric devices with high room-temperature figures of merit
Venkatasubramanian, R., Siivola, E., Colpitts, T., & O'Quinn, B. (2001) · Nature · doi:10.1038/35098012 · Cited by 5,205
Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Quantum Dot Superlattice Thermoelectric Materials and Devices
Harman, T. C., Taylor, P. J., Walsh, M. P., & LaForge, B. E. (2002) · Science · doi:10.1126/science.1072886 · Cited by 2,495
New and Old Concepts in Thermoelectric Materials
Sootsman, J. R., Chung, D. Y., & Kanatzidis, M. G. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200900598 · Cited by 2,488
Filled Skutterudite Antimonides: A New Class of Thermoelectric Materials
Sales, B. C., Mandrus, D., & Williams, R. K. (1996) · Science · doi:10.1126/science.272.5266.1325 · Cited by 2,073
Introduction to Thermoelectricity
Goldsmid, H. J. (2010) · Springer Series in Materials Science · doi:10.1007/978-3-642-00716-3 · Cited by 1,505
Perspectives on thermoelectrics: from fundamentals to device applications
Zebarjadi, M., Esfarjani, K., Dresselhaus, M. S., Ren, Z. F., & Chen, G. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02497c · Cited by 1,365
A review of working fluid and expander selections for organic Rankine cycle
Bao, J., & Zhao, L. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.040 · Cited by 1,323
Effect of Low-Temperature Phase Changes on the Mechanical Properties of Alloys near Composition TiNi
Buehler, W. J., Gilfrich, J. V., & Wiley, R. C. (1963) · Journal of Applied Physics · doi:10.1063/1.1729603 · Cited by 1,151
Materials for thermoelectric energy conversion
Wood, C. (1988) · Reports on Progress in Physics · doi:10.1088/0034-4885/51/4/001 · Cited by 1,121
Manufacturing and processing of NiTi implants: A review
Elahinia, M. H., Hashemi, M., Tabesh, M., & Bhaduri, S. B. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.11.001 · Cited by 1,067
Semiconducting Ge clathrates: Promising candidates for thermoelectric applications
Nolas, G. S., Cohn, J. L., Slack, G. A., & Schujman, S. B. (1998) · Applied Physics Letters · doi:10.1063/1.121747 · Cited by 962
A review on thermoelectric renewable energy: Principle parameters that affect their performance
Hamid Elsheikh, M., Shnawah, D. A., Sabri, M. F. M., Said, S. B. M., Haji Hassan, M., Ali Bashir, M. B., & Mohamad, M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.10.027 · Cited by 958
Pyroelectric materials and devices for energy harvesting applications
Bowen, C. R., Taylor, J., LeBoulbar, E., Zabek, D., Chauhan, A., & Vaish, R. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01759e · Cited by 836
Pyroelectricity: From Ancient Curiosity to Modern Imaging Tool
Lang, S. B. (2005) · Physics Today · doi:10.1063/1.2062916 · Cited by 676
Glasslike Heat Conduction in High-Mobility Crystalline Semiconductors
Cohn, J. L., Nolas, G. S., Fessatidis, V., Metcalf, T. H., & Slack, G. A. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.779 · Cited by 668
Highly Stretchable Piezoelectric‐Pyroelectric Hybrid Nanogenerator
Lee, J., Lee, K. Y., Gupta, M. K., Kim, T. Y., Lee, D., Oh, J., Ryu, C., Yoo, W. J., Kang, C., Yoon, S., et al. (2014) · Advanced Materials · doi:10.1002/adma.201303570 · Cited by 550
Zheng, X. F., Liu, C. X., Yan, Y. Y., & Wang, Q. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.053 · Cited by 515
Waste Heat Recovery. Technology and Opportunities in U.S. Industry
Johnson, I., Choate, W., & Davidson, A. (2008) · doi:10.2172/1218716 · Cited by 445
Origin of the High Performance in GeTe-Based Thermoelectric Materials upon Bi2Te3 Doping
Wu, D., Zhao, L.-D., Hao, S., Jiang, Q., Zheng, F., Doak, J. W., Wu, H., Chi, H., Gelbstein, Y., Uher, C., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504896a · Cited by 388
Nanostructured thermoelectric materials
Harman, T. C., Walsh, M., LaForge, B. E., & Turner, G. W. (2005) · Journal of Electronic Materials · doi:10.1007/s11664-005-0083-8 · Cited by 362
Thermal energy harvesting through pyroelectricity
Cuadras, A., Gasulla, M., & Ferrari, V. (2010) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2009.12.018 · Cited by 342
Heterostructure integrated thermionic coolers
Shakouri, A., & Bowers, J. E. (1997) · Applied Physics Letters · doi:10.1063/1.119861 · Cited by 341
BiSb alloys for magneto-thermoelectric and thermomagnetic cooling
Yim, W. M., & Amith, A. (1972) · Solid-State Electronics · doi:10.1016/0038-1101(72)90173-6 · Cited by 336
Enhanced Thermoelectric Properties in the Counter-Doped SnTe System with Strained Endotaxial SrTe
Zhao, L., Zhang, X., Wu, H., Tan, G., Pei, Y., Xiao, Y., Chang, C., Wu, D., Chi, H., Zheng, L., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13276 · Cited by 323
Lee, F. Y., Goljahi, S., McKinley, I. M., Lynch, C. S., & Pilon, L. (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/21/2/025021 · Cited by 286
Pyroelectric energy conversion: Optimization principles
Sebald, G., Lefeuvre, E., & Guyomar, D. (2008) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2008.680 · Cited by 274
Pyroelectric Nanogenerators for Driving Wireless Sensors
Yang, Y., Wang, S., Zhang, Y., & Wang, Z. L. (2012) · Nano Letters · doi:10.1021/nl303755m · Cited by 267
Pyroelectric and electrocaloric materials
Li, X., Lu, S.-G., Chen, X.-Z., Gu, H., Qian, X.-S., & Zhang, Q. M. (2013) · J. Mater. Chem. C · doi:10.1039/c2tc00283c · Cited by 264
Pyroelectric conversion cycles
Olsen, R. B., Bruno, D. A., & Briscoe, J. M. (1985) · Journal of Applied Physics · doi:10.1063/1.336244 · Cited by 214
Recent advances on thermoelectric materials
Zheng, J.-C. (2008) · Frontiers of Physics in China · doi:10.1007/s11467-008-0028-9 · Cited by 211
Energy harvesting based on Ericsson pyroelectric cycles in a relaxor ferroelectric ceramic
Sebald, G., Pruvost, S., & Guyomar, D. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/01/015012 · Cited by 195
Small Scale Organic Rankine Cycle (ORC): A Techno-Economic Review
Tocci, L., Pal, T., Pesmazoglou, I., et al. (2017) · Energies · doi:10.3390/en10040413 · Cited by 182
Navid, A., & Pilon, L. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/2/025012 · Cited by 161
Current trends in the physics of thermoelectric materials
Dmitriev, A. V., & Zvyagin, I. P. (2010) · Physics-Uspekhi · doi:10.3367/ufne.0180.201008b.0821 · Cited by 161
Thermodynamics cycle analysis and numerical modeling of thermoelastic cooling systems
Qian, S., Ling, J., Hwang, Y., Radermacher, R., & Takeuchi, I. (2015) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2015.04.001 · Cited by 150
Nazari, N., Heidarnejad, P., & Porkhial, S. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.022 · Cited by 146
The pyroelectric energy harvesting capabilities of PMN–PT near the morphotropic phase boundary
Kandilian, R., Navid, A., & Pilon, L. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/5/055020 · Cited by 137
Ab initio studies of the electronic structure of defects in PbTe
Ahmad, S., Mahanti, S. D., Hoang, K., & Kanatzidis, M. G. (2006) · Physical Review B · doi:10.1103/physrevb.74.155205 · Cited by 134
Harvesting heat energy from hot/cold water with a pyroelectric generator
Leng, Q., Chen, L., Guo, H., Liu, J., Liu, G., Hu, C., & Xi, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01782j · Cited by 123
Pyroelectric conversion cycle of vinylidene fluoride-trifluoroethylene copolymer
Olsen, R., Bruno, D. A., Briscoe, J. M., & Jacobs, E. W. (1985) · Journal of Applied Physics · doi:10.1063/1.335280 · Cited by 120
A pyroelectric energy converter which employs regeneration
Olsen, R., Briscoe, J. M., Bruno, D. A., & Butler, W. F. (1981) · Ferroelectrics · doi:10.1080/00150198108209595 · Cited by 119
Chapter 5 Phonon transport in low-dimensional structures
Chen, G. (2001) · Semiconductors and semimetals · doi:10.1016/s0080-8784(01)80130-7 · Cited by 117
Cyclic energy harvesting from pyroelectric materials
Mane, P., Xie, J., Leang, K. K., & Mossi, K. M. (2011) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2011.1769 · Cited by 96
Thermo-Magneto-Electric Generator Arrays for Active Heat Recovery System
Chun, J., Song, H., Kang, M., Kang, H. B., Kishore, R. A., & Priya, S. (2017) · Scientific Reports · doi:10.1038/srep41383 · Cited by 74
Self-citationJovovic, V., Thiagarajan, S. J., Heremans, J. P., Komissarova, T., Khokhlov, D. R., & Nicorici, A. (2008) · Journal of Applied Physics · doi:10.1063/1.2890150 · Cited by 73
Analysis of thermomechanical behavior of shape memory alloys
Tanaka, K., Hayashi, T., Itoh, Y., & TOBUSHI, H. (1992) · Mechanics of Materials · doi:10.1016/0167-6636(92)90003-v · Cited by 63
Vats, G., Vaish, R., & Bowen, C. (2014) · Journal of Applied Physics · doi:10.1063/1.4861031 · Cited by 58
Hunter, S. R., Lavrik, N. V., Mostafa, S., Rajic, S., & Datskos, P. G. (2012) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.920978 · Cited by 54
Influence of chemistry on the pyroelectric effect in tourmaline
Hawkins, K., Mackinnon, I. D. R., & Schneeberger, H. (1995) · American Mineralogist · doi:10.2138/am-1995-5-610 · Cited by 49
A homogenized free energy model for hysteresis in thin-film shape memory alloys
Massad, J. E., & Smith, R. C. (2005) · Thin Solid Films · doi:10.1016/j.tsf.2005.04.079 · Cited by 41
Energy Conversion in Shape Memory Alloy Heat Engine Part I: Theory
Zhu, J., Liew, Y. K. M., Huang, W. M., Liang, N. G., & Huang, W. M. (2001) · Journal of Intelligent Material Systems and Structures · doi:10.1106/amfv-fpqq-rnbk-ee50 · Cited by 28
Nanostructured Thermoelectric Materials: From Superlattices to Nanocomposites
Yang, R., & Chen, G. (2006) · Cited by 25
Size-dependent pyroelectric properties of gallium nitride nanowires
Zhang, J., & Wang, C. (2016) · Journal of Applied Physics · doi:10.1063/1.4945765 · Cited by 24
IWANAGA, H., TOBUSHI, H., & Hiromichi, I. T. O. (1988) · JSME international journal Ser 1 Solid mechanics strength of materials · doi:10.1299/jsmea1988.31.3_634 · Cited by 20
Cited by
Energy Applications of Magnetocaloric Materials
Kitanovski, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903741 · Cited by 540
Liu, H., Fu, H., Sun, L., Lee, C., & Yeatman, E. M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110473 · Cited by 405
Recent Advances in Pyroelectric Materials and Applications
Zhang, D., Wu, H., Bowen, C. R., & Yang, Y. (2021) · Small · doi:10.1002/smll.202103960 · Cited by 279
Jang, Y., Kim, S. M., Spinks, G. M., & Kim, S. J. (2020) · Advanced Materials · doi:10.1002/adma.201902670 · Cited by 274
A piezoelectric human motion energy harvester with stress amplification mechanism
He, Y., Zhao, Y., Fang, K., & Fang, F. (2024) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x241280896 · Cited by 4
Metadata
- Authors
- Kishore, R. A., & Priya, S.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-08-14
- Volume
- 11
- Issue
- 8
- Pages
- 1433
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2887218615
- Cited by
- 327
- References
- 58
- FWCI
- 7.86
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.