The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Artificial Intelligence Approaches for Prediction of Compressive Strength of Geopolymer Concrete
Open accessAbstract
Geopolymer concrete (GPC) has been used as a partial replacement of Portland cement concrete (PCC) in various construction applications. In this paper, two artificial intelligence approaches, namely adaptive neuro fuzzy inference (ANFIS) and artificial neural network (ANN), were used to predict the compressive strength of GPC, where coarse and fine waste steel slag were used as aggregates. The prepared mixtures contained fly ash, sodium hydroxide in solid state, sodium silicate solution, coarse and fine steel slag aggregates as well as water, in which four variables (fly ash, sodium hydroxide, sodium silicate solution, and water) were used as input parameters for modeling. A total number of 210 samples were prepared with target-specified compressive strength at standard age of 28 days of 25, 35, and 45 MPa. Such values were obtained and used as targets for the two AI prediction tools. Evaluation of the model’s performance was achieved via criteria such as mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2). The results showed that both ANN and ANFIS models have strong potential for predicting the compressive strength of GPC but ANFIS (MAE = 1.655 MPa, RMSE = 2.265 MPa, and R2 = 0.879) is better than ANN (MAE = 1.989 MPa, RMSE = 2.423 MPa, and R2 = 0.851). Sensitivity analysis was then carried out, and it was found that reducing one input parameter could only make a small change to the prediction performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep learning in neural networks: an overview
Schmidhuber, J. (2015) · Neural Networks · doi:10.1016/j.neunet.2014.09.003 · Cited by 18,570
Chai, T., & Draxler, R. R. (2014) · Geoscientific Model Development · doi:10.5194/gmd-7-1247-2014 · Cited by 8,761 · cited 3×
“These measures can be calculated by the following equations [55]:”
BackgroundMethodInfluentialGeopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Durability evaluation of geopolymer and conventional concretes
Albitar, M., Mohamed Ali, M. S., Visintin, P., & Drechsler, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.056 · Cited by 629
Chemical stability of cementitious materials based on metakaolin
Palomo, A., Blanco-Varela, M. T., Granizo, M. L., Puertas, F., Vazquez, T., & Grutzeck, M. W. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00074-5 · Cited by 608
Topçu, İ. B., & Sarıdemir, M. (2008) · Computational Materials Science · doi:10.1016/j.commatsci.2007.04.009 · Cited by 531
Structural and material performance of geopolymer concrete: A review
Ma, C.-K., Awang, A. Z., & Omar, W. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.111 · Cited by 528
Panda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Engineering Properties of Alkali-Activated Fly Ash Concrete
(2006) · ACI Materials Journal · doi:10.14359/15261 · Cited by 476
Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networks
Trtnik, G., Kavčič, F., & Turk, G. (2009) · Ultrasonics · doi:10.1016/j.ultras.2008.05.001 · Cited by 463
Boyacioglu, M. A., & Avci, D. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.04.045 · Cited by 426
Bui, D.-K., Nguyen, T., Chou, J.-S., Nguyen-Xuan, H., & Ngo, T. D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.201 · Cited by 395
He, Z., Wen, X., Liu, H., & Du, J. (2014) · Journal of Hydrology · doi:10.1016/j.jhydrol.2013.11.054 · Cited by 332
Khademi, F., Jamal, S. M., Deshpande, N., & Londhe, S. (2016) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2016.09.003 · Cited by 321
Özcan, F., Atiş, C. D., Karahan, O., Uncuoğlu, E., & Tanyıldızı, H. (2009) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2009.01.005 · Cited by 309
Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN
Prasad, B. K. R., Eskandari, H., & Reddy, B. V. V. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.01.014 · Cited by 307
Jaafari, A., Panahi, M., Pham, B. T., Shahabi, H., Bui, D. T., Rezaie, F., & Lee, S. (2019) · CATENA · doi:10.1016/j.catena.2018.12.033 · Cited by 253
Self-citationPrediction of shear strength of soft soil using machine learning methods
Pham, B. T., Son, L. H., Hoang, T.-A., Nguyen, D.-M., & Tien Bui, D. (2018) · CATENA · doi:10.1016/j.catena.2018.04.004 · Cited by 246
Self-citationPredicting the shear strength of reinforced concrete beams using artificial neural networks
Mansour, M. Y., Dicleli, M., Lee, J. Y., & Zhang, J. (2004) · Engineering Structures · doi:10.1016/j.engstruct.2004.01.011 · Cited by 226
Concrete strength prediction by means of neural network
Lai, S., & Serra, M. (1997) · Construction and Building Materials · doi:10.1016/s0950-0618(97)00007-x · Cited by 200
Structural performance of reinforced geopolymer concrete members: A review
Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.088 · Cited by 179
Ahmadi, M., Naderpour, H., & Kheyroddin, A. (2014) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2014.01.006 · Cited by 138
Naderpour, H., Poursaeidi, O., & Ahmadi, M. (2018) · Measurement · doi:10.1016/j.measurement.2018.05.051 · Cited by 129
Analysis of geopolymer concrete columns
Sarker, P. K. (2008) · Materials and Structures · doi:10.1617/s11527-008-9415-5 · Cited by 127
Potassium based geopolymer for passive fire protection of concrete tunnels linings
Sakkas, K., Panias, D., Nomikos, P. P., & Sofianos, A. I. (2014) · Tunnelling and Underground Space Technology · doi:10.1016/j.tust.2014.05.003 · Cited by 109
Perera, R., Pérez, M. B., Arteaga, Á., & Diego, A. D. (2010) · Composites Part B Engineering · doi:10.1016/j.compositesb.2010.03.003 · Cited by 104
Tanarslan, H. M., Seçer, M., & Kumanlıoğlu, A. A. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.008 · Cited by 94
Petrillo, A., Cioffi, R., Felice, F. D., Colangelo, F., & Borrelli, C. (2016) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.12421 · Cited by 40
An ANN-Based Smart Tomographic Reconstructor in a Dynamic Environment
Juez, F. J. D. C., Lasheras, F. S., Roqueñí, N., & Osborn, J. (2012) · Sensors · doi:10.3390/s120708895 · Cited by 38
Neural Network Modeling for Prediction of Weld Bead Geometry in Laser Microwelding
Ismail, M. I. S., Okamoto, Y., & Okada, A. (2013) · Advances in Optical Technologies · doi:10.1155/2013/415837 · Cited by 37
In Situ Elevated Temperature Testing of Fly Ash Based Geopolymer Composites
Vickers, L., Pan, Z., Tao, Z., & van Riessen, A. (2016) · Materials · doi:10.3390/ma9060445 · Cited by 36
Cited by
Machine learning prediction of mechanical properties of concrete: Critical review
Ben Chaabene, W., Flah, M., & Nehdi, M. L. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119889 · Cited by 779
Ekanayake, I. U., Meddage, D. P. P., & Rathnayake, U. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01059 · Cited by 498
Mohtasham Moein, M., Saradar, A., Rahmati, K., Ghasemzadeh Mousavinejad, S. H., Bristow, J., Aramali, V., & Karakouzian, M. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105444 · Cited by 391
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Nguyen, K. T., Nguyen, Q. D., Le, T. A., Shin, J., & Lee, K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118581 · Cited by 272
Self-citation
Metadata
- Authors
- Dao, D. V., Ly, H.-B., Trinh, S. H., Le, T.-T., & Pham, B. T.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-03-25
- Volume
- 12
- Issue
- 6
- Pages
- 983
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2923370583
- Cited by
- 344
- References
- 35
- FWCI
- 28.78
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.