Surface Quality of 3D-Printed Models as a Function of Various Printing Parameters
Open accessThe DOI matches its Crossref record.
Abstract
Although 3D-printing is common in dentistry, the technique does not produce the required quality for all target applications. Resin type, printing resolution, positioning, alignment, target structure, and the type and number of support structures may influence the surface roughness of printed objects, and this study investigates the effects of these variables. A stereolithographic data record was generated from a master model. Twelve printing processes were executed with a stereolithography Desktop 3D Printer, including models aligned across and parallel to the printer front as well as solid and hollow models. Three layer thicknesses were used, and in half of all processes, the models were inclined at 15°. For comparison, eight gypsum models and milled polyurethane models were manufactured. The mean roughness index of each model was determined with a perthometer. Surface roughness values were approximately 0.65 µm (master), 0.87–4.44 µm (printed), 2.32–2.57 µm (milled), 1.72–1.86 µm (cast plaster/alginate casting), and 0.98–1.03 µm (cast plaster/polyether casting). The layer height and type and number of support structures influenced the surface roughness of printed models (p ≤ 0.05), but positioning, structure, and alignment did not.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Piedra-Cascón, W., Krishnamurthy, V. R., Att, W., & Revilla-León, M. (2021) · Journal of Dentistry · doi:10.1016/j.jdent.2021.103630 · Cited by 387
Post-Production Finishing Processes Utilized in 3D Printing Technologies
Kantaros, A., Ganetsos, T., Petrescu, F., Ungureanu, L., & Munteanu, I. (2024) · Processes · doi:10.3390/pr12030595 · Cited by 80
“Processes like precision machining or laser trimming are instrumental in refining the dimensional attributes of components, ensuring compliance with specified tolerances and seamless integration within larger assemblies [30].”
BackgroundParize, H., Dias Corpa Tardelli, J., Bohner, L., Sesma, N., Muglia, V. A., & Cândido dos Reis, A. (2022) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2020.12.008 · Cited by 56
Metadata
- Authors
- Arnold, C., Monsees, D., Hey, J., & Schweyen, R.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-06-19
- Volume
- 12
- Issue
- 12
- Pages
- 1970
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2950599916
- Cited by
- 223
- References
- 0
- FWCI
- 8.70
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface Quality of 3D-Printed Models as a Function of Various Printing Parameters. https://app.cochat.ai/papers/10.3390/ma12121970
- The paper
- Arnold, C., Monsees, D., Hey, J., & Schweyen, R. (2019). Surface Quality of 3D-Printed Models as a Function of Various Printing Parameters. Materials. https://doi.org/10.3390/ma12121970
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.