CoChat

Hybrid TiO2-ZnO Nanomaterials Prepared Using Laser Ablation in Liquid

Open access
Mintcheva, Neli, Yamaguchi, Shigeru, Kulinich, Sergei A. · 2020 · Materials
Cited by 43

The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.

Abstract

Hybrids of semiconductor nanomaterials often demonstrate properties that are superior to those of their components. In this study, we prepared hybrid nanomaterials of TiO2 and ZnO, which are among the most actively studied semiconductors, by means of millisecond-pulsed laser and analyzed how their morphology, particle size, and surface composition depend on preparation conditions. A series of nanomaterials were obtained via sequentially ablating Zn and Ti metal plates (in different sequences) in water, while laser pulses of lower (2.0 J/pulse) and higher (5.0 J/pulse) energy were applied. The properties of laser-produced hybrid TiO2-ZnO nanomaterials were shown to be governed by experimental conditions such as laser pulse width, pulse peak power, and reaction media (either pure water or colloid with nanoparticles). The morphology revealed nanospheres of TiO2 that decorate nanorods of ZnO or flower-like aggregates of zinc oxide. Intriguingly, after extended ablation time, titania was found to be self-doped with Ti3+ and Ti2+ ions, and the contribution of lower oxidation states of titanium could be controlled by the applied laser pulse energy. The physicochemical characteristics of hybrid nanomaterials were compared with pure ZnO and TiO2 prepared under the same laser conditions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma13030719

Cites

12 of 12 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 12 references

Research works printed but not linked: 39

  1. Amans, 2019, Status and demand of research to bring laser generation of nanoparticles in liquids to maturity, Appl. Surf. Sci., 488, 445, 10.1016/j.apsusc.2019.05.117 · DOI · Paper page
  2. Zeng, 2012, Nanomaterials via laser ablation/ irradiation in liquid: A review, Adv. Funct. Mater., 22, 1333, 10.1002/adfm.201102295 · DOI · Paper page
  3. Niu, 2010, Morphology control of nanostructures via surface reaction of metal nanodroplets, J. Am. Chem. Soc., 132, 9814, 10.1021/ja102967a · DOI · Paper page
  4. Zhang, 2017, Colloidal metal nanoparticles prepared by laser ablation and their applications, ChemPhysChem, 18, 986, 10.1002/cphc.201601220 · DOI · Paper page
  5. Reichenberger, 2019, Perspective of surfactant-free colloidal nanoparticles in heterogeneous catalysis, ChemCatChem, 11, 4489, 10.1002/cctc.201900666 · DOI · Paper page
  6. Zhang, 2017, Recent advances in surfactant-free, surface-charged, and defect-rich catalysts developed by laser ablation and processing in liquids, ChemNanoMat, 3, 512, 10.1002/cnma.201700079 · DOI · Paper page
  7. Mintcheva, 2020, Room-temperature gas sensing of laser-modified anatase TiO2 decorated with Au nanoparticles, Appl. Surf. Sci., 507, 145169, 10.1016/j.apsusc.2019.145169 · DOI
  8. Niu, 2012, Galvanic replacement reactions of active metal nanoparticles, Chem.-Eur. J., 18, 4234, 10.1002/chem.201102544 · DOI
  9. Mintcheva, 2018, Nanomaterials produced by laser beam ablating Sn-Zn alloy in water, J. Alloys Compd., 747, 166, 10.1016/j.jallcom.2018.02.350 · DOI
  10. Liu, 2009, Room temperature synthesized rutile TiO2 nanoparticles induced by laser ablation in liquid and their photocatalytic activity, Nanotechnology, 20, 285707, 10.1088/0957-4484/20/28/285707 · DOI · Paper page
  11. Zimbone, 2016, Photocatalytical activity of amorphous hydrogenated TiO2 obtained by pulsed laser ablation in liquid, Mater. Sci. Semicond. Proc., 42, 28, 10.1016/j.mssp.2015.09.012 · DOI
  12. Pan, 2013, Self-doped rutile titania with high performance for direct and ultrafast assay of H2O2, ACS Appl. Mater. Interfaces, 5, 12784, 10.1021/am4045162 · DOI
  13. Amin, 2015, Laser-assisted synthesis of ultra-small anatase TiO2 nanoparticles, Appl. Surf. Sci., 348, 30, 10.1016/j.apsusc.2014.12.191 · DOI
  14. Huang, 2010, Nonstoichiometric titanium oxides via pulsed laser ablation in water, Nanoscale Res. Lett., 5, 972, 10.1007/s11671-010-9591-4 · DOI · Paper page
  15. Nikolov, 2009, Synthesis and characterization of TiOx nanoparticles prepared by pulsed-laser ablation of Ti target in water, Appl. Surf. Sci., 255, 5351, 10.1016/j.apsusc.2008.09.007 · DOI
  16. Shaji, 2017, Effects of ablation energy and post-irradiation on the structure and properties of titanium dioxide nanomaterials, Appl. Surf. Sci., 405, 183, 10.1016/j.apsusc.2017.01.282 · DOI
  17. Singh, 2009, Synthesis of titanium dioxide nanomaterial by pulsed laser ablation in water, J. Nanosci. Nanotechnol., 9, 5367, 10.1166/jnn.2009.1114 · DOI · Paper page
  18. Chaturvedi, 2017, Growth of anatase and rutile phase TiO2 nanoparticles using pulsed laser ablation in liquid: Influence of surfactant addition and ablation time variation, Appl. Surf. Sci., 396, 303, 10.1016/j.apsusc.2016.10.133 · DOI
  19. Boutinguiza, 2012, Production of TiO2 crystalline nanoparticles by laser ablation in ethanol, Appl. Surf. Sci., 258, 9484, 10.1016/j.apsusc.2012.05.148 · doi:10.1016/j.apsusc.2012.05.148
  20. Boutinguiza, 2011, Laser-assisted production of spherical TiO2 nanoparticles in water, Nanotechnology, 22, 195606, 10.1088/0957-4484/22/19/195606 · DOI
  21. Reich, 2018, X-ray spectroscopic and stroboscopic analysis of pulsed-laser ablation of Zn and its oxidation, Appl. Phys. A, 124, 71, 10.1007/s00339-017-1503-3 · DOI
  22. Ishikawa, 2006, Preparation of zinc oxide nanorods using pulsed laser ablation in water media at high temperature, J. Colloid Interface Sci., 300, 612, 10.1016/j.jcis.2006.04.005 · DOI · Paper page
  23. Kulinich, 2013, Pressure effect on ZnO nanoparticles prepared via laser ablation in water, J. Appl. Phys., 113, 033509, 10.1063/1.4775733 · DOI · Paper page
  24. Goto, 2015, Defects in ZnO nanoparticles laser-ablated in water-ethanol mixture at different pressures, Jpn. J. Appl. Phys., 54, 070305, 10.7567/JJAP.54.070305 · DOI
  25. Cho, 2009, Characterization of ZnO nanoparticles grown by laser ablation of a Zn target in neat water, Bull. Korean Chem. Soc., 30, 1616, 10.5012/bkcs.2009.30.7.1616 · DOI
  26. Kim, 2011, Formation of ZnO nanoparticles by laser ablation in neat water, Chem. Phys. Lett., 511, 116, 10.1016/j.cplett.2011.06.017 · DOI
  27. Dorranian, 2012, Photoluminescence of ZnO nanoparticles generated by laser ablation in deionized water, Appl. Phys. A, 109, 307, 10.1007/s00339-012-7073-5 · DOI
  28. Zamiri, 2012, Aqueous starch as a stabilizer in zinc oxide nanoparticle synthesis via laser ablation, J. Alloys Compd., 516, 41, 10.1016/j.jallcom.2011.11.118 · DOI
  29. Usui, 2005, Photoluminescence of ZnO nanoparticles prepared by laser ablation in different surfactant solutions, J. Phys. Chem. B, 109, 120, 10.1021/jp046747j · DOI · Paper page
  30. Kawabata, 2012, Fabrication of ZnO nanoparticles by laser ablation of sintered ZnO in aqueous solution, Appl. Phys. A, 107, 213, 10.1007/s00339-011-6745-x · DOI
  31. Desarkar, 2013, One-step synthesis of Zn/ZnO hollow nanoparticles by the laser ablation in liquid technique, Laser Phys. Lett., 10, 055903, 10.1088/1612-2011/10/5/055903 · DOI · Paper page
  32. Honda, 2016, ZnO nanorods prepared via ablation of Zn with millisecond laser in liquid media, Phys. Chem. Chem. Phys., 18, 23628, 10.1039/C6CP04556A · DOI · Paper page
  33. Kondo, 2017, Room temperature ethanol sensor based on ZnO prepared via laser ablation in water, Jpn. J. Appl. Phys., 56, 080304, 10.7567/JJAP.56.080304 · DOI · Paper page
  34. Abbas, 2017, Morphological driven photocatalytic activity of ZnO nanostructures, Appl. Surf. Sci., 394, 498, 10.1016/j.apsusc.2016.10.080 · DOI
  35. Kubiak, A., Siwinska-Ciesielczyk, K., and Jesionowski, T. (2018). Titania-based hybrid materials with ZnO, ZrO2 and MoS2: A review. Materials, 11. · DOI
  36. Lee, 2011, Synthesis of CeO2/TiO2 nanoparticles by laser ablation of Ti target in cerium (III) nitrate hexahydrate (Ce(NO3)3·6H2O) aqueous solution, J. Alloys Compd., 509, 1231, 10.1016/j.jallcom.2010.09.197 · DOI
  37. Gondal, 2015, Synthesis of green TiO2/ZnO/CdS hybrid nano-catalyst for efficient light harvesting using an elegant pulsed laser ablation in liquids method, Appl. Surf. Sci., 357, 2217, 10.1016/j.apsusc.2015.09.213 · DOI
  38. Zhang, 2019, Visible light photocatalytic performance of laser-modified TiO2/SnO2 powders decorated with SiC nanocrystals, Ceram. Int., 45, 12449, 10.1016/j.ceramint.2019.03.178 · DOI
  39. Zhang, 2014, Effect of aspect ratio and surface defects on the photocatalytic activity of ZnO nanorods, Sci. Rep., 4, 4596, 10.1038/srep04596 · DOI · Paper page

Cited by

Metadata

Authors
Mintcheva, N., Yamaguchi, S., & Kulinich, S. A.
Venue
Materials
Publisher
MDPI AG
Published
2020-02-05
Volume
13
Issue
3
Pages
719
ISSN
1996-1944 (ISSN-L)
OpenAlex
W3004995266
Cited by
43
References
12
FWCI
1.99
Type
journal article
Language
en
Open access
gold
Funders
Amada Foundation (AF-2019225-B3)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.