Hybrid TiO2-ZnO Nanomaterials Prepared Using Laser Ablation in Liquid
Open accessThe DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
Hybrids of semiconductor nanomaterials often demonstrate properties that are superior to those of their components. In this study, we prepared hybrid nanomaterials of TiO2 and ZnO, which are among the most actively studied semiconductors, by means of millisecond-pulsed laser and analyzed how their morphology, particle size, and surface composition depend on preparation conditions. A series of nanomaterials were obtained via sequentially ablating Zn and Ti metal plates (in different sequences) in water, while laser pulses of lower (2.0 J/pulse) and higher (5.0 J/pulse) energy were applied. The properties of laser-produced hybrid TiO2-ZnO nanomaterials were shown to be governed by experimental conditions such as laser pulse width, pulse peak power, and reaction media (either pure water or colloid with nanoparticles). The morphology revealed nanospheres of TiO2 that decorate nanorods of ZnO or flower-like aggregates of zinc oxide. Intriguingly, after extended ablation time, titania was found to be self-doped with Ti3+ and Ti2+ ions, and the contribution of lower oxidation states of titanium could be controlled by the applied laser pulse energy. The physicochemical characteristics of hybrid nanomaterials were compared with pure ZnO and TiO2 prepared under the same laser conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Xiao, J., Liu, P., Wang, C. X., & Yang, G. W. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.02.004 · Cited by 352 · cited 1×
“In a typical procedure, the laser beam is focused on a metal target immersed in liquid, producing plasma, vapor, or molten metal drops that then react with the liquid medium to form particular compounds and grow as NPs [5].”
BackgroundPulsed laser ablation based synthesis of colloidal metal nanoparticles for catalytic applications
Zhang, J., Chaker, M., & Ma, D. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.07.050 · Cited by 264
Laser-Prepared CuZn Alloy Catalyst for Selective Electrochemical Reduction of CO2 to Ethylene
Feng, Y., Li, Z., Liu, H., Dong, C., Wang, J., Kulinich, S. A., & Du, X. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b02837 · Cited by 164
Self-citationHollow Nanoparticles of Metal Oxides and Sulfides: Fast Preparation via Laser Ablation in Liquid
Niu, K. Y., Yang, J., Kulinich, S. A., Sun, J., & Du, X. W. (2010) · Langmuir · doi:10.1021/la1033146 · Cited by 128 · cited 1×
“reported solid and hollow Zn/ZnO NPs that were produced by ns-laser in water [40,41].”
BackgroundSelf-citationLaser-Ablated ZnO Nanoparticles and Their Photocatalytic Activity toward Organic Pollutants
Mintcheva, N., Aljulaih, A. A., Wunderlich, W., Kulinich, S. A., & Iwamori, S. (2018) · Materials · doi:10.3390/ma11071127 · Cited by 115 · cited 2×
“0 eV), being in agreement with the literature [42,44,51].”
BackgroundResultSelf-citationGavrilenko, E. A., Goncharova, D. A., Lapin, I. N., Nemoykina, A. L., Svetlichnyi, V. A., Aljulaih, A. A., Mintcheva, N., & Kulinich, S. A. (2019) · Materials · doi:10.3390/ma12010186 · Cited by 88
Self-citationSmall size TiO2 nanoparticles prepared by laser ablation in water
Barreca, F., Acacia, N., Barletta, E., Spadaro, D., Currò, G., & Neri, F. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.04.026 · Cited by 71 · cited 3×
“When the second harmonic (532 nm) of Nd:YAG nanosecond laser was applied in water, it gave a mixture of anatase and rutile [25], while the presence of surfactants was found to favor the growth of the rutile phase [16,26].”
BackgroundMethodGondal, M. A., Ilyas, A. M., & Baig, U. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.05.104 · Cited by 65 · cited 2×
“Unexpectedly, however, little work was reported so far on ZnO-TiO2 hybrid nanomaterials prepared via LAL, eVen though the method permits the preparation of hybrid nanomaterials in a relatively easy way [50].”
BackgroundHe, C., Sasaki, T., Usui, H., Shimizu, Y., & Koshizaki, N. (2007) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2007.04.006 · Cited by 65
Simple Preparation of Anatase TiO 2 Nanoparticles via Pulsed Laser Ablation in Liquid
Hong, S. M., Lee, S., Jung, H. J., Yu, Y., Shin, J. H., Kwon, K.-Y., & Choi, M. Y. (2013) · Bulletin of the Korean Chemical Society · doi:10.5012/bkcs.2013.34.1.279 · Cited by 59 · cited 2×
“For example, ablation of Ti metal by IR-nanosecond-pulsed laser in water and methanol was reported to produce anatase [23,24].”
BackgroundLaser Synthesis of Iridium Nanospheres for Overall Water Splitting
Wang, H.-B., Wang, J.-Q., Mintcheva, N., Wang, M., Li, S., Mao, J., Liu, H., Dong, C.-K., Kulinich, S. A., & Du, X.-W. (2019) · Materials · doi:10.3390/ma12183028 · Cited by 25
Self-citation
Research works printed but not linked: 39
- Amans, 2019, Status and demand of research to bring laser generation of nanoparticles in liquids to maturity, Appl. Surf. Sci., 488, 445, 10.1016/j.apsusc.2019.05.117 · DOI · Paper page
- Zeng, 2012, Nanomaterials via laser ablation/ irradiation in liquid: A review, Adv. Funct. Mater., 22, 1333, 10.1002/adfm.201102295 · DOI · Paper page
- Niu, 2010, Morphology control of nanostructures via surface reaction of metal nanodroplets, J. Am. Chem. Soc., 132, 9814, 10.1021/ja102967a · DOI · Paper page
- Zhang, 2017, Colloidal metal nanoparticles prepared by laser ablation and their applications, ChemPhysChem, 18, 986, 10.1002/cphc.201601220 · DOI · Paper page
- Reichenberger, 2019, Perspective of surfactant-free colloidal nanoparticles in heterogeneous catalysis, ChemCatChem, 11, 4489, 10.1002/cctc.201900666 · DOI · Paper page
- Zhang, 2017, Recent advances in surfactant-free, surface-charged, and defect-rich catalysts developed by laser ablation and processing in liquids, ChemNanoMat, 3, 512, 10.1002/cnma.201700079 · DOI · Paper page
- Mintcheva, 2020, Room-temperature gas sensing of laser-modified anatase TiO2 decorated with Au nanoparticles, Appl. Surf. Sci., 507, 145169, 10.1016/j.apsusc.2019.145169 · DOI
- Niu, 2012, Galvanic replacement reactions of active metal nanoparticles, Chem.-Eur. J., 18, 4234, 10.1002/chem.201102544 · DOI
- Mintcheva, 2018, Nanomaterials produced by laser beam ablating Sn-Zn alloy in water, J. Alloys Compd., 747, 166, 10.1016/j.jallcom.2018.02.350 · DOI
- Liu, 2009, Room temperature synthesized rutile TiO2 nanoparticles induced by laser ablation in liquid and their photocatalytic activity, Nanotechnology, 20, 285707, 10.1088/0957-4484/20/28/285707 · DOI · Paper page
- Zimbone, 2016, Photocatalytical activity of amorphous hydrogenated TiO2 obtained by pulsed laser ablation in liquid, Mater. Sci. Semicond. Proc., 42, 28, 10.1016/j.mssp.2015.09.012 · DOI
- Pan, 2013, Self-doped rutile titania with high performance for direct and ultrafast assay of H2O2, ACS Appl. Mater. Interfaces, 5, 12784, 10.1021/am4045162 · DOI
- Amin, 2015, Laser-assisted synthesis of ultra-small anatase TiO2 nanoparticles, Appl. Surf. Sci., 348, 30, 10.1016/j.apsusc.2014.12.191 · DOI
- Huang, 2010, Nonstoichiometric titanium oxides via pulsed laser ablation in water, Nanoscale Res. Lett., 5, 972, 10.1007/s11671-010-9591-4 · DOI · Paper page
- Nikolov, 2009, Synthesis and characterization of TiOx nanoparticles prepared by pulsed-laser ablation of Ti target in water, Appl. Surf. Sci., 255, 5351, 10.1016/j.apsusc.2008.09.007 · DOI
- Shaji, 2017, Effects of ablation energy and post-irradiation on the structure and properties of titanium dioxide nanomaterials, Appl. Surf. Sci., 405, 183, 10.1016/j.apsusc.2017.01.282 · DOI
- Singh, 2009, Synthesis of titanium dioxide nanomaterial by pulsed laser ablation in water, J. Nanosci. Nanotechnol., 9, 5367, 10.1166/jnn.2009.1114 · DOI · Paper page
- Chaturvedi, 2017, Growth of anatase and rutile phase TiO2 nanoparticles using pulsed laser ablation in liquid: Influence of surfactant addition and ablation time variation, Appl. Surf. Sci., 396, 303, 10.1016/j.apsusc.2016.10.133 · DOI
- Boutinguiza, 2012, Production of TiO2 crystalline nanoparticles by laser ablation in ethanol, Appl. Surf. Sci., 258, 9484, 10.1016/j.apsusc.2012.05.148 · doi:10.1016/j.apsusc.2012.05.148
- Boutinguiza, 2011, Laser-assisted production of spherical TiO2 nanoparticles in water, Nanotechnology, 22, 195606, 10.1088/0957-4484/22/19/195606 · DOI
- Reich, 2018, X-ray spectroscopic and stroboscopic analysis of pulsed-laser ablation of Zn and its oxidation, Appl. Phys. A, 124, 71, 10.1007/s00339-017-1503-3 · DOI
- Ishikawa, 2006, Preparation of zinc oxide nanorods using pulsed laser ablation in water media at high temperature, J. Colloid Interface Sci., 300, 612, 10.1016/j.jcis.2006.04.005 · DOI · Paper page
- Kulinich, 2013, Pressure effect on ZnO nanoparticles prepared via laser ablation in water, J. Appl. Phys., 113, 033509, 10.1063/1.4775733 · DOI · Paper page
- Goto, 2015, Defects in ZnO nanoparticles laser-ablated in water-ethanol mixture at different pressures, Jpn. J. Appl. Phys., 54, 070305, 10.7567/JJAP.54.070305 · DOI
- Cho, 2009, Characterization of ZnO nanoparticles grown by laser ablation of a Zn target in neat water, Bull. Korean Chem. Soc., 30, 1616, 10.5012/bkcs.2009.30.7.1616 · DOI
- Kim, 2011, Formation of ZnO nanoparticles by laser ablation in neat water, Chem. Phys. Lett., 511, 116, 10.1016/j.cplett.2011.06.017 · DOI
- Dorranian, 2012, Photoluminescence of ZnO nanoparticles generated by laser ablation in deionized water, Appl. Phys. A, 109, 307, 10.1007/s00339-012-7073-5 · DOI
- Zamiri, 2012, Aqueous starch as a stabilizer in zinc oxide nanoparticle synthesis via laser ablation, J. Alloys Compd., 516, 41, 10.1016/j.jallcom.2011.11.118 · DOI
- Usui, 2005, Photoluminescence of ZnO nanoparticles prepared by laser ablation in different surfactant solutions, J. Phys. Chem. B, 109, 120, 10.1021/jp046747j · DOI · Paper page
- Kawabata, 2012, Fabrication of ZnO nanoparticles by laser ablation of sintered ZnO in aqueous solution, Appl. Phys. A, 107, 213, 10.1007/s00339-011-6745-x · DOI
- Desarkar, 2013, One-step synthesis of Zn/ZnO hollow nanoparticles by the laser ablation in liquid technique, Laser Phys. Lett., 10, 055903, 10.1088/1612-2011/10/5/055903 · DOI · Paper page
- Honda, 2016, ZnO nanorods prepared via ablation of Zn with millisecond laser in liquid media, Phys. Chem. Chem. Phys., 18, 23628, 10.1039/C6CP04556A · DOI · Paper page
- Kondo, 2017, Room temperature ethanol sensor based on ZnO prepared via laser ablation in water, Jpn. J. Appl. Phys., 56, 080304, 10.7567/JJAP.56.080304 · DOI · Paper page
- Abbas, 2017, Morphological driven photocatalytic activity of ZnO nanostructures, Appl. Surf. Sci., 394, 498, 10.1016/j.apsusc.2016.10.080 · DOI
- Kubiak, A., Siwinska-Ciesielczyk, K., and Jesionowski, T. (2018). Titania-based hybrid materials with ZnO, ZrO2 and MoS2: A review. Materials, 11. · DOI
- Lee, 2011, Synthesis of CeO2/TiO2 nanoparticles by laser ablation of Ti target in cerium (III) nitrate hexahydrate (Ce(NO3)3·6H2O) aqueous solution, J. Alloys Compd., 509, 1231, 10.1016/j.jallcom.2010.09.197 · DOI
- Gondal, 2015, Synthesis of green TiO2/ZnO/CdS hybrid nano-catalyst for efficient light harvesting using an elegant pulsed laser ablation in liquids method, Appl. Surf. Sci., 357, 2217, 10.1016/j.apsusc.2015.09.213 · DOI
- Zhang, 2019, Visible light photocatalytic performance of laser-modified TiO2/SnO2 powders decorated with SiC nanocrystals, Ceram. Int., 45, 12449, 10.1016/j.ceramint.2019.03.178 · DOI
- Zhang, 2014, Effect of aspect ratio and surface defects on the photocatalytic activity of ZnO nanorods, Sci. Rep., 4, 4596, 10.1038/srep04596 · DOI · Paper page
Cited by
Abid, N., Khan, A. M., Shujait, S., Chaudhary, K., Ikram, M., Imran, M., Haider, J., Khan, M., Khan, Q., & Maqbool, M. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102597 · Cited by 1,271
Subhan, A., Mourad, A.-H. I., & Al-Douri, Y. (2022) · Nanomaterials · doi:10.3390/nano12132144 · Cited by 95
Defects rich nanostructured black zinc oxide formed by nanosecond pulsed laser irradiation in liquid
Sharma Kanakkillam, S., Krishnan, B., Sepulveda Guzman, S., Amilcar Aguilar Martinez, J., Avellaneda Avellaneda, D., & Shaji, S. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.150858 · Cited by 31
Hybrid nanostructures of Ag/Au-ZnO synthesized by pulsed laser ablation/irradiation in liquid
Kanakkillam, S. S., Krishnan, B., Peláez, R. F. C., Martinez, J. A. A., Avellaneda, D. A., & Shaji, S. (2021) · Surfaces and Interfaces · doi:10.1016/j.surfin.2021.101561 · Cited by 21
Metadata
- Authors
- Mintcheva, N., Yamaguchi, S., & Kulinich, S. A.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-02-05
- Volume
- 13
- Issue
- 3
- Pages
- 719
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W3004995266
- Cited by
- 43
- References
- 12
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- gold
- Funders
- Amada Foundation (AF-2019225-B3)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.