CoChat

Novel Adsorbent Based on Banana Peel Waste for Removal of Heavy Metal Ions from Synthetic Solutions

Open access

The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.

Abstract

Due to its valuable compounds, food waste has been gaining attention in different applications, such as life quality and environment. Combined with circular economy requirements, a valorization method for waste, especially banana waste, was to convert them into adsorbents with advanced properties. The banana waste, after thermal treatment, was used with high removal performances (100%) for the removal of heavy metals, such as Cr, Cu, Pb, and Zn, but their small particle size makes them very hard to recover and reuse. For this reason, a biopolymeric matrix was used to incorporate the banana waste. The matrix was chosen for its remarkable properties, such as low cost, biodegradability, low carbon footprint, and reduced environmental impact. In this research, different types of materials (simple banana peel ash BPA and combined with biopolymeric matrix, ALG–BPA, CS–BPA) were prepared, characterized, and tested. The materials were characterized by means of attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), optical microscopy (OM), scanning electron microscopy (SEM), and tested for the removal of metal ions from synthetic solutions using atomic absorption spectroscopy (AAS). The ALG–BPA material proved to be the most efficient in the removal of heavy metal ions from synthetic solution, reaching even 100% metal removal for Cr, Fe, Pb, and Zn, while the CS-based materials were the least efficient, presenting the best values for Cr and Fe ions with a removal efficiency of 34.14% and 28.38%, respectively. By adding BPA to CS, the adsorption properties of the material were slightly improved, but also only for Cr and Fe ions, to 37.09% and 57.78%.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma14143946

Cites

45 of 45 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Dripping of 1% ALG solution (a) and ALG–BPA (1:1) (b) in a CaCl2 bath.
Figure 1 Dripping of 1% ALG solution (a) and ALG–BPA (1:1) (b) in a CaCl2 bath.CC BY · PubMed Central
Figure 2 The appearance of ALG (wet—(a), dried—(b)) and ALG–BPA (1:1) (wet—(c), dried—(d)) microbeads.
Figure 2 The appearance of ALG (wet—(a), dried—(b)) and ALG–BPA (1:1) (wet—(c), dried—(d)) microbeads.CC BY · PubMed Central
Figure 3 The appearance of CS (wet—(a), dried—(b)) and CS–BPA (1:1) (wet—(c), dried—(d)) microbeads.
Figure 3 The appearance of CS (wet—(a), dried—(b)) and CS–BPA (1:1) (wet—(c), dried—(d)) microbeads.CC BY · PubMed Central
Figure 4 The ATR-FTIR analysis for BPA.
Figure 4 The ATR-FTIR analysis for BPA.CC BY · PubMed Central
Figure 5 The ATR-FTIR analysis for ALG and ALG–BPA (1:1) microbeads.
Figure 5 The ATR-FTIR analysis for ALG and ALG–BPA (1:1) microbeads.CC BY · PubMed Central
Figure 6 The ATR-FTIR analysis for CS and CS–BPA (1:1) microbeads.
Figure 6 The ATR-FTIR analysis for CS and CS–BPA (1:1) microbeads.CC BY · PubMed Central
Figure 7 Optical microscopy analysis for ALG microbeads: (a) 50× and (b) 100× magnification.
Figure 7 Optical microscopy analysis for ALG microbeads: (a) 50× and (b) 100× magnification.CC BY · PubMed Central
Figure 8 Optical microscopy analysis for ALG–BPA (1:1) microbeads: (a) 50×, (b) 100×, and (c) 200× magnification.
Figure 8 Optical microscopy analysis for ALG–BPA (1:1) microbeads: (a) 50×, (b) 100×, and (c) 200× magnification.CC BY · PubMed Central
Figure 9 Optical microscopy analysis for CS microbeads: (a) 50× and (b) 100× magnification.
Figure 9 Optical microscopy analysis for CS microbeads: (a) 50× and (b) 100× magnification.CC BY · PubMed Central
Figure 10 Optical microscopy analysis for CS–BPA (1:1) microbeads: (a) 50×, (b) 100×, and (c) 200× magnification.
Figure 10 Optical microscopy analysis for CS–BPA (1:1) microbeads: (a) 50×, (b) 100×, and (c) 200× magnification.CC BY · PubMed Central
Figure 11 SEM images for BPA sample at 4000× (a) and the EDS pattern (b).
Figure 11 SEM images for BPA sample at 4000× (a) and the EDS pattern (b).CC BY · PubMed Central
Figure 12 SEM images for ALG microbeads at 8000× (a) and the EDS pattern (b).
Figure 12 SEM images for ALG microbeads at 8000× (a) and the EDS pattern (b).CC BY · PubMed Central
Figure 13 SEM images for ALG–BPA (1:1) microbeads at 8000× (a) and the EDS pattern (b).
Figure 13 SEM images for ALG–BPA (1:1) microbeads at 8000× (a) and the EDS pattern (b).CC BY · PubMed Central
Figure 14 SEM images for CS microbeads at 4000× (a), EDS pattern (b).
Figure 14 SEM images for CS microbeads at 4000× (a), EDS pattern (b).CC BY · PubMed Central
Figure 15 SEM images for CS–BPA (1:1) microbeads at 4000× (a) and the EDS pattern (b).
Figure 15 SEM images for CS–BPA (1:1) microbeads at 4000× (a) and the EDS pattern (b).CC BY · PubMed Central
Figure 16 Qualitative analysis on a multielement solution (concentration 0.5 mg/L) for BPA (a) and removal efficiency (b).
Figure 16 Qualitative analysis on a multielement solution (concentration 0.5 mg/L) for BPA (a) and removal efficiency (b).CC BY · PubMed Central
Figure 17 Qualitative analysis on a multielement solution (concentration 0.5 mg/L) for ALG (a) and ALG–BPA (1:1) microbeads (b).
Figure 17 Qualitative analysis on a multielement solution (concentration 0.5 mg/L) for ALG (a) and ALG–BPA (1:1) microbeads (b).CC BY · PubMed Central
Figure 18 Qualitative analysis on a multielement solution (concentration 0.5 mg/L) for CS (a) and CS–BPA (1:1) microbeads (b).
Figure 18 Qualitative analysis on a multielement solution (concentration 0.5 mg/L) for CS (a) and CS–BPA (1:1) microbeads (b).CC BY · PubMed Central
Figure 19 Removal efficiencies of the 4 types of microbeads for the metals studied: Cd (a), Co (b), Cr (c), Cu (d), Fe (e), Mn (f), Pb (g), and Zn (h).
Figure 19 Removal efficiencies of the 4 types of microbeads for the metals studied: Cd (a), Co (b), Cr (c), Cu (d), Fe (e), Mn (f), Pb (g), and Zn (h).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 55

Metadata

Authors
Negroiu, M., Țurcanu, A. A., Matei, E., Râpă, M., Covaliu, C. I., Predescu, A. M., Pantilimon, C. M., Coman, G., & Predescu, C.
Affiliations
  • Universitatea Națională de Știință și Tehnologie Politehnica București (RO)
  • Center for Research and Eco-Metallurgical Expertise, University Politehnica of Bucharest, 313 Spl. Independentei, 060042 Bucharest, Romania
Corresponding author
Matei, Ecaterina
Venue
Materials
Publisher
MDPI AG
Published
2021-07-14
Volume
14
Issue
14
Pages
3946
ISSN
1996-1944 (ISSN-L)
OpenAlex
W3181833274
Cited by
55
References
45
Citations by year
2026: 10 · 2025: 10 · 2024: 12 · 2023: 15 · 2022: 7 · 2021: 1
FWCI
2.60
Type
journal article
Language
en
Open access
Locations
  • Materials (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
  • Physical Sciences › Environmental Science › Water Science and Technology › Heavy Metal Pollution Remediation
Keywords
banana peel waste, heavy metal removal, adsorbents, chitosan, alginate, chromium, lead, zinc, iron, food waste valorization, circular economy, heavy metal adsorption

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.