CoChat

Response Surface Methodology Analysis of Energy Harvesting System over Pathway Tiles

Open access

The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.

Abstract

This paper presents an experimental analysis of the optimization of PZT-based tiles for energy harvesting. The hardware (actual experiment), PZT-based tiles, were developed using 6 × 6 piezoelectric (PZT—lead zirconate titanate) sensors of 40 mm in diameter on a hard cardboard sheet (300 × 300 mm2). Our experimental analysis of the designed tiles obtained an optimized power of 3.626 mW (85 kg or 0.83 kN using 36 sensors) for one footstep and 0.9 mW for 30 footsteps at high tapping frequency. Theoretical analysis was conducted with software (Design-Expert) using the response surface methodology (RSM) for optimized PZT tiles, obtaining a power of 6784.155 mW at 150 kg or 1.47 kN weight using 34 sensors. This software helped to formulate the mathematical equation for the most suitable PZT tile model for power optimization. It used the quadratic model to provide adjusted and predicted R2 values of 0.9916 and 0.9650, respectively. The values were less than 0.2 apart, which indicates a high correlation between the actual and predicted values. The outcome of the various experiments can help with the selection of input factors for optimized power during pavement design.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma16031146

Cites

32 of 32 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 (a) Block diagram of PZT-based tiles’ energy generation, and (b) layout of walking tile platform.
Figure 1 (a) Block diagram of PZT-based tiles’ energy generation, and (b) layout of walking tile platform.CC BY · PubMed Central
Figure 2 Correlation between power, sensor quantity, and weight.
Figure 2 Correlation between power, sensor quantity, and weight.CC BY · PubMed Central
Figure 3 3D power response of the tile.
Figure 3 3D power response of the tile.CC BY · PubMed Central
Figure 4 Power response graph of actual versus predicted model.
Figure 4 Power response graph of actual versus predicted model.CC BY · PubMed Central
Figure 5 (a) Connection of 6 × 6 PZT sensors in series-parallel (S-P) configurations, (b) applied force of 65 kg with varying foot position 1, (c) applied force of 65 kg with jumping mode 1, (d) applied force of 65 kg with jumping mode 2, (e) connection of 6 × 6 PZT sensors in S-P configurations via changing alignment of sensors (CAS), (f) applied force of 65 kg with jumping mode position 1 via CAS, (g) connection of 6 × 6 PZT sensors in S-P configurations via CAS and connection and fixation of sensors via CAS, and (h) applied force of 65 kg with jumping mode position 2 via CAS.
Figure 5 (a) Connection of 6 × 6 PZT sensors in series-parallel (S-P) configurations, (b) applied force of 65 kg with varying foot position 1, (c) applied force of 65 kg with jumping mode 1, (d) applied force of 65 kg with jumping mode 2, (e) connection of 6 × 6 PZT sensors in S-P configurations via changing alignment of sensors (CAS), (f) applied force of 65 kg with jumping mode position 1 via CAS, (g) connection of 6 × 6 PZT sensors in S-P configurations via CAS and connection and fixation of sensors via CAS, and (h) applied force of 65 kg with jumping mode position 2 via CAS.CC BY · PubMed Central
Figure 6 Actual power analysis using 30 and 36 sensors for different subject weights.
Figure 6 Actual power analysis using 30 and 36 sensors for different subject weights.CC BY · PubMed Central
Figure 7 Predicted power analysis using varying quantities of (a) sensors and (b) weights of the subject.
Figure 7 Predicted power analysis using varying quantities of (a) sensors and (b) weights of the subject.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 32 references

Research works printed but not linked: 1

  1. Shreeshayana, 2017, Piezoelectric Energy Harvesting using PZT in Floor Tile Design, Int. J. Adv. Res. Electr. Electron. Instrum. Eng., 6, 8872

Cited by

See all 9

Metadata

Authors
Gothwal, P., Kumar, A., Rathore, D., Mukherji, R., Vetriselvi, T., & Anandan, S.
Affiliations
  • Manipal University Jaipur (IN)
  • Amity University Jaipur (IN)
  • Institute of Chartered Financial Analysts of India University, Jaipur (IN)
  • Vellore Institute of Technology University (IN)
  • Department of Chemistry, National Institute of Technology, Trichy 620015, Tamil Nadu, India
Corresponding author
  • Gothwal, P.
  • Anandan, S.
Venue
Materials
Publisher
MDPI AG
Published
2023-01-29
Volume
16
Issue
3
Pages
1146
ISSN
1996-1944 (ISSN-L)
OpenAlex
W4318465141
Cited by
9
References
32
Citations by year
2025: 3 · 2024: 4 · 2023: 2
FWCI
0.89
Type
journal article
Language
en
Open access
Locations
  • Materials (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
Keywords
piezoelectric energy harvesting, response surface methodology, power optimization, quadratic model, pavement design, tapping frequency

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Response Surface Methodology Analysis of Energy Harvesting System over Pathway Tiles. https://app.cochat.ai/papers/10.3390/ma16031146
The paper
Gothwal, P., Kumar, A., Rathore, D., Mukherji, R., Vetriselvi, T., & Anandan, S. (2023). Response Surface Methodology Analysis of Energy Harvesting System over Pathway Tiles. Materials. https://doi.org/10.3390/ma16031146

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.