CoChat

Microwave-Reactor-Based Preparation of Red Iron Oxide Pigment from Waste Iron Sulfate

Open access
Splinter, Kamila, Moszyński, Dariusz, Lendzion-Bieluń, Zofia · 2023 · Materials

The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.

Abstract

This article presents a two-step method of iron red synthesis based on waste long-term deposited iron(II) sulfate. The first step is the purification of waste iron sulfate, and then the pigment is synthesized by precipitation using a microwave reactor. The newly developed method of purification allows for quick and thorough purification of iron salt. The use of a microwave reactor in the synthesis of iron red makes it possible to reduce the temperature of the goethite–hematite phase transition from 500 °C to 170 °C and skip the calcination process. A temperature reduction in the synthesis decreases the formation of agglomerates of synthesized materials compared to commercial ones. The results of the research showed a change in the physicochemical properties of the obtained pigments depending on the conditions of synthesis. Waste iron(II) sulfate is a promising raw material for the synthesis of iron red pigments. Laboratory pigments are found to be differ from commercial pigments. The difference in properties speaks in favor of synthesized materials.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma16083242

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Scheme of the waste FeSO4 purification process.
Figure 1 Scheme of the waste FeSO4 purification process.CC BY · PubMed Central
Figure 2 XRPD pattern of (a) waste FeSO4, (b) purified FeSO4.
Figure 2 XRPD pattern of (a) waste FeSO4, (b) purified FeSO4.CC BY · PubMed Central
Figure 3 XRPD pattern of laboratory pigment samples: (a) CZ 10%, (b) CZ 21%, (c) CZ 28%, (d) CZ 14%. Red lines mark the remnants of geothite.
Figure 3 XRPD pattern of laboratory pigment samples: (a) CZ 10%, (b) CZ 21%, (c) CZ 28%, (d) CZ 14%. Red lines mark the remnants of geothite.CC BY · PubMed Central
Figure 4 XRPD pattern of iron pigment samples: (a) Commercial pigment A, (b) Commercial pigment B, (c) Commercial pigment C, (d) Commercial pigment D, (e) CZ 14%. Green lines mark the content of SiO2 phase.
Figure 4 XRPD pattern of iron pigment samples: (a) Commercial pigment A, (b) Commercial pigment B, (c) Commercial pigment C, (d) Commercial pigment D, (e) CZ 14%. Green lines mark the content of SiO2 phase.CC BY · PubMed Central
Figure 5 FTIR spectra for (a) laboratory pigments; (b) commercial pigments. A–G are the functional group designations.
Figure 5 FTIR spectra for (a) laboratory pigments; (b) commercial pigments. A–G are the functional group designations.CC BY · PubMed Central
Figure 6 The survey XPS spectra of CZ 14% and Commercial pigments C and D.
Figure 6 The survey XPS spectra of CZ 14% and Commercial pigments C and D.CC BY · PubMed Central
Figure 7 The XPS Fe 2p spectra of CZ 14% and Commercial pigments C and D.
Figure 7 The XPS Fe 2p spectra of CZ 14% and Commercial pigments C and D.CC BY · PubMed Central
Figure 8 Results obtained from BET analysis: (a) nitrogen adsorption isotherms of laboratory pigments; (b) nitrogen adsorption isotherm of commercial pigments.
Figure 8 Results obtained from BET analysis: (a) nitrogen adsorption isotherms of laboratory pigments; (b) nitrogen adsorption isotherm of commercial pigments.CC BY · PubMed Central
Figure 9 BET surface area of laboratory and commercial pigments.
Figure 9 BET surface area of laboratory and commercial pigments.CC BY · PubMed Central
Figure 10 Pigment size distribution analysis by dynamic light scattering of (a) laboratory and (b) commercial materials.
Figure 10 Pigment size distribution analysis by dynamic light scattering of (a) laboratory and (b) commercial materials.CC BY · PubMed Central
Figure 11 SEM images of iron pigments (SEM HV: 30 kV; SEM MAG: 30 kx): (a) CZ 14%, (b) CZ 28%, (c) Commercial pigment A.
Figure 11 SEM images of iron pigments (SEM HV: 30 kV; SEM MAG: 30 kx): (a) CZ 14%, (b) CZ 28%, (c) Commercial pigment A.CC BY · PubMed Central
Figure 12 Oil absorption for laboratory and commercial pigments (rl—reference level).
Figure 12 Oil absorption for laboratory and commercial pigments (rl—reference level).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 35 references

Research works printed but not linked: 4

  1. Splinter, K. (2021). Preparation of Iron Pigments Based on Waste Iron(II) Sulfate. [Bachelor‘s Thesis, West Pomeranian University of Technology in Szczecin].
  2. Splinter, K. (2022). Synthesis and Characterization of Iron Oxides with Pigmentation Properties. [Master‘s Thesis, West Pomeranian University of Technology in Szczecin].
  3. Konratowska, A. (2010). Otrzymywanie, Właściwości I Zastosowanie Wybranych Tlenków I Hydroksytlenków Żelaza. [Ph.D. Thesis, West Pomeranian University of Technology in Szczecin].
  4. Painter, P., Starsinic, M., and Coleman, M. (1985). Fourier Transform Infrared Spectroscopy, Academic Press.

Cited by

See all 8

Metadata

Authors
Splinter, K., Moszyński, D., & Lendzion-Bieluń, Z.
Affiliations
  • West Pomeranian University of Technology in Szczecin (PL)
  • Department of Inorganic Chemical Technology and Environment Engineering, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, Piastów Ave. 42, 71-065 Szczecin, Poland
Venue
Materials
Publisher
MDPI AG
Published
2023-04-20
Volume
16
Issue
8
Pages
3242
ISSN
1996-1944 (ISSN-L)
OpenAlex
W4366588273
Cited by
8
References
35
Citations by year
2026: 2 · 2025: 2 · 2024: 2 · 2023: 2
FWCI
0.62
Type
journal article
Language
en
Open access
Locations
  • Materials (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
  • Najlepsi z Najlepszych 4.0 (MEiN/2021/182/DIR/NN4)
  • European Social Fund (MEiN/2021/182/DIR/NN4)
Topics
  • Physical Sciences › Chemistry › Inorganic Chemistry › Pigment Synthesis and Properties
  • Physical Sciences › Materials Science › Materials Chemistry › Iron oxide chemistry and applications
  • Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
Keywords
microwave-assisted synthesis, waste purification, precipitation synthesis, industrial waste valorization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Microwave-Reactor-Based Preparation of Red Iron Oxide Pigment from Waste Iron Sulfate. https://app.cochat.ai/papers/10.3390/ma16083242
The paper
Splinter, K., Moszyński, D., & Lendzion-Bieluń, Z. (2023). Microwave-Reactor-Based Preparation of Red Iron Oxide Pigment from Waste Iron Sulfate. Materials. https://doi.org/10.3390/ma16083242

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.