The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Thermal Conductivity of Diamond Composites
Open accessAbstract
A major problem challenging specialists in present-day materials sciences is the development of compact, cheap to fabricate heat sinks for electronic devices, primarily for computer processors, semiconductor lasers, high-power microchips, and electronics components. The materials currently used for heat sinks of such devices are aluminum and copper, with thermal conductivities of about 250 W/(m·K) and 400 W/(m·K), respectively. Significantly, the thermal expansion coefficient of metals differs markedly from those of the materials employed in semiconductor electronics (mostly silicon); one should add here the low electrical resistivity metals possess. By contrast, natural single-crystal diamond is known to feature the highest thermal conductivity of all the bulk materials studied thus far, as high as 2,200 W/(m·K). Needless to say, it cannot be applied in heat removal technology because of high cost. Recently, SiC- and AlN-based ceramics have started enjoying wide use as heat sink materials; the thermal conductivity of such composites, however, is inferior to that of metals by nearly a factor two. This prompts a challenging scientific problem to develop diamond-based composites with thermal characteristics superior to those of aluminum and copper, adjustable thermal expansion coefficient, low electrical conductivity and a moderate cost, below that of the natural single-crystal diamond. The present review addresses this problem and appraises the results reached by now in studying the possibility of developing composites in diamond-containing systems with a view of obtaining materials with a high thermal conductivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hansen, M., Anderko, K., & Salzberg, H. W. (1958) · Journal of The Electrochemical Society · doi:10.1149/1.2428700 · Cited by 14,782
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
Thermal Conductivity of Heterogeneous Two-Component Systems
Hamilton, R. L., & Crosser, O. K. (1962) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160003a005 · Cited by 3,672 · cited 3×
“To take into account particle shape, the Maxwell model thermal conductivity of a composite was further modified by Hamilton and Crosser [27]:”
MethodSwartz, E. T., & Pohl, R. O. (1989) · Reviews of Modern Physics · doi:10.1103/revmodphys.61.605 · Cited by 2,924
Lienhard, J. H. (1981) · Cited by 2,748
(2000) · Circular Storage Tanks and Silos · doi:10.4324/9780203301579-10 · Cited by 2,621
Nonmetallic crystals with high thermal conductivity
Slack, G. A. (1973) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(73)90092-9 · Cited by 2,151
Effective thermal conductivity of particulate composites with interfacial thermal resistance
Nan, C.-W., Birringer, R., Clarke, D. R., & Gleiter, H. (1997) · Journal of Applied Physics · doi:10.1063/1.365209 · Cited by 2,009
The Elastic and Thermo-elastic Properties of Composite Media
Kerner, E. H. (1956) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/69/8/305 · Cited by 1,786
Effective Thermal Conductivity of Composites with Interfacial Thermal Barrier Resistance
Hasselman, D. P. H., & Johnson, L. F. (1987) · Journal of Composite Materials · doi:10.1177/002199838702100602 · Cited by 1,355
Cited by
Factors affecting thermal conductivities of the polymers and polymer composites: A review
Guo, Y., Ruan, K., Shi, X., Yang, X., & Gu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108134 · Cited by 865
Graphene quilts for thermal management of high-power GaN transistors
Yan, Z., Liu, G., Khan, J. M., & Balandin, A. A. (2012) · Nature Communications · doi:10.1038/ncomms1828 · Cited by 543
Thermal Conductivity of Graphene-Polymer Composites: Mechanisms, Properties, and Applications
Li, A., Zhang, C., & Zhang, Y.-F. (2017) · Polymers · doi:10.3390/polym9090437 · Cited by 419
Nasir, S., Hussein, M., Zainal, Z., & Yusof, N. (2018) · Materials · doi:10.3390/ma11020295 · Cited by 416
The mechanical and strength properties of diamond
Field, J. E. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/12/126505 · Cited by 257
Metadata
- Authors
- Kidalov, S. V., & Shakhov, F. M.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2009-12-21
- Volume
- 2
- Issue
- 4
- Pages
- 2467-2495
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2036680871
- Cited by
- 299
- References
- 46
- FWCI
- 2.71
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.