The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys
Open accessAbstract
Welding of dissimilar magnesium alloys and aluminum alloys is an important issue because of their increasing applications in industries. In this document, the research and progress of a variety of welding techniques for joining dissimilar Mg alloys and Al alloys are reviewed from different perspectives. Welding of dissimilar Mg and Al is challenging due to the formation of brittle intermetallic compound (IMC) such as Mg17Al12 and Mg2Al3. In order to increase the joint strength, three main research approaches were used to eliminate or reduce the Mg-Al intermetallic reaction layer. First, solid state welding techniques which have a low welding temperature were used to reduce the IMCs. Second, IMC variety and distribution were controlled to avoid the degradation of the joining strength in fusion welding. Third, techniques which have relatively controllable reaction time and energy were used to eliminate the IMCs. Some important processing parameters and their effects on weld quality are discussed, and the microstructure and metallurgical reaction are described. Mechanical properties of welds such as hardness, tensile, shear and fatigue strength are discussed. The aim of the report is to review the recent progress in the welding of dissimilar Mg and Al to provide a basis for follow-up research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mordike, B. L., & Ebert, T. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01351-4 · Cited by 4,537
A review of laser welding techniques for magnesium alloys
Cao, X. J., Jahazi, M., Immarigeon, J.-P., & Wallace, W. E. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.06.068 · Cited by 610
Schubert, E., Klassen, M., Zerner, I., Walz, C., & Sepold, G. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00756-7 · Cited by 497
Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys
Sato, Y. S., Park, S. H. C., Michiuchi, M., & Kokawa, H. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.02.002 · Cited by 437
Al-to-Mg Friction Stir Welding: Effect of Material Position, Travel Speed, and Rotation Speed
Firouzdor, V., & Kou, S. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0340-1 · Cited by 265
Friction stir lap joining aluminum and magnesium alloys
Chen, Y. C., & Nakata, K. (2007) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.10.033 · Cited by 262
Zhao, L., & Zhang, Z. (2007) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.10.006 · Cited by 247
Dissimilar friction stir welding between magnesium and aluminum alloys
Kwon, Y.-J., Shigematsu, I., & Saito, N. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.04.080 · Cited by 230
Somasekharan, A. C., & Murr, L. E. (2004) · Materials Characterization · doi:10.1016/j.matchar.2004.03.005 · Cited by 224
Panteli, A., Robson, J. D., Brough, I., & Prangnell, P. B. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2012.06.055 · Cited by 203
The effect of water cooling during dissimilar friction stir welding of Al alloy to Mg alloy
Mofid, M. A., Abdollah-Zadeh, A., & Ghaini, F. M. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.11.004 · Cited by 192
SOMASEKHARAN, A. (2004) · Materials Characterization · doi:10.1016/s1044-5803(04)00054-3 · Cited by 189
Factors affecting the properties of Friction Stir Welds between aluminum and magnesium alloys
Venkateswaran, P., & Reynolds, A. P. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.02.069 · Cited by 182
Dissimilar friction stir welding between 5052 aluminum alloy and AZ31 magnesium alloy
Yan, Y. J., Zhang, D., Qiu, C., & Zhang, W. (2010) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(10)60550-x · Cited by 159
Shang, J., Wang, K., Zhou, Q., Zhang, D., Huang, J. G., & Li, G. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.05.008 · Cited by 157
Dissimilar joining of Al/Mg light metals by compound casting process
Hajjari, E., Divandari, M., Razavi, S. H., Emami, S. M., Homma, T., & Kamado, S. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5595-4 · Cited by 140
Formation of intermetallic phases in diffusion-welded joints of aluminium and magnesium alloys
Dietrich, D., Nickel, D., Krause, M. M., Lampke, T., Coleman, M., & Randlè, V. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4841-5 · Cited by 133
Peak temperatures and microstructures in aluminium and magnesium alloy friction stir spot welds
Gerlich, A. P., Su, P., & North, T. H. (2005) · Science and Technology of Welding & Joining · doi:10.1179/174329305x48383 · Cited by 123
Formation of intermetallic compounds in Al and Mg alloy interface during friction stir spot welding
Choi, D.-H., Ahn, B.-W., Lee, C.-Y., Yeon, Y.-M., Song, K., & Jung, S. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.08.030 · Cited by 123
The thermal cycle during the dissimilar friction spot welding of aluminum and magnesium alloy
Suhuddin, U. F. H., Fischer, V., & dos Santos, J. F. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.09.008 · Cited by 117
An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer
Zhang, J., Luo, G., Wang, Y., Shen, Q., & Zhang, L. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.06.014 · Cited by 114
Chowdhury, S., Chen, D. L., Bhole, S. D., Cao, X. J., & Wanjara, P. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.07.019 · Cited by 111
Sato, Y. S., SHIOTA, A., Kokawa, H., Okamoto, K., Yang, Q., & Kim, C. (2010) · Science and Technology of Welding & Joining · doi:10.1179/136217109x12568132624208 · Cited by 89
Effect of interlayer composition on the microstructure and strength of diffusion bonded Mg/Al joint
Liu, L. M., Zhao, L. M., & Xu, R. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.04.040 · Cited by 83
Self-citationWang, Y., Luo, G., Zhang, J., Shen, Q., & Zhang, L. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.09.035 · Cited by 79
Hirano, S., Okamoto, K., Doi, M., Okamura, H., Inagaki, M., & Aono, Y. (2003) · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY · doi:10.2207/qjjws.21.539 · Cited by 71
Robson, J. D., Panteli, A., & Prangnell, P. B. (2012) · Science and Technology of Welding & Joining · doi:10.1179/1362171812y.0000000032 · Cited by 64
Wang, H., Liu, L., & Liu, F. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.02.085 · Cited by 61
Self-citationEffect of joining temperature on microstructure and properties of diffusion bonded Mg/Al joints
Shang, J., Wang, K., Zhou, Q., Zhang, D., Huang, J. G., & Ge, J. (2012) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(11)61414-3 · Cited by 52
Microstructure and XRD analysis in the interface zone of Mg/Al diffusion bonding
Wang, J., Li, Y., Liu, P., & Geng, H. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.11.096 · Cited by 46
The effect of the adhesive on the microcracks in the laser welded bonding Mg to Al joint
Liu, L. M., & Wang, H. Y. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.11.061 · Cited by 26
Self-citation
Cited by
Advances in additive manufacturing of metal-based functionally graded materials
Reichardt, A., Shapiro, A. A., Otis, R., Dillon, R. P., Borgonia, J. P., McEnerney, B. W., Hosemann, P., & Beese, A. M. (2021) · International Materials Reviews · doi:10.1080/09506608.2019.1709354 · Cited by 334
Ultrasonic welding of magnesium alloys: a review
Rubino, F., Parmar, H., Esperto, V., & Carlone, P. (2020) · Materials and Manufacturing Processes · doi:10.1080/10426914.2020.1758330 · Cited by 66
Advances in ultrasonic welding of lightweight alloys: A review
Abbas, Z., Zhao, L., Deng, J., Wang, S., & Hong, W. (2023) · High Temperature Materials and Processes · doi:10.1515/htmp-2022-0298 · Cited by 35
Characteristics of Intermetallic Compounds in Dissimilar Friction Stir Welding: A Review
Esmaeili, A., Sbarufatti, C., & Hamouda, A. M. S. (2019) · Metallography, Microstructure, and Analysis · doi:10.1007/s13632-019-00557-w · Cited by 17
Metadata
- Authors
- Liu, L., Ren, D., & Liu, F.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2014-05-08
- Volume
- 7
- Issue
- 5
- Pages
- 3735-3757
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2022477290
- Cited by
- 262
- References
- 31
- FWCI
- 17.53
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.