The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Composite Membranes for High Temperature PEM Fuel Cells and Electrolysers: A Critical Review
Open accessAbstract
Polymer electrolyte membrane (PEM) fuel cells and electrolysers offer efficient use and production of hydrogen for emission-free transport and sustainable energy systems. Perfluorosulfonic acid (PFSA) membranes like Nafion® and Aquivion® are the state-of-the-art PEMs, but there is a need to increase the operating temperature to improve mass transport, avoid catalyst poisoning and electrode flooding, increase efficiency, and reduce the cost and complexity of the system. However, PSFAs-based membranes exhibit lower mechanical and chemical stability, as well as proton conductivity at lower relative humidities and temperatures above 80 °C. One approach to sustain performance is to introduce inorganic fillers and improve water retention due to their hydrophilicity. Alternatively, polymers where protons are not conducted as hydrated H3O+ ions through liquid-like water channels as in the PSFAs, but as free protons (H+) via Brønsted acid sites on the polymer backbone, can be developed. Polybenzimidazole (PBI) and sulfonated polyetheretherketone (SPEEK) are such materials, but need considerable acid doping. Different composites are being investigated to solve some of the accompanying problems and reach sufficient conductivities. Herein, we critically discuss a few representative investigations of composite PEMs and evaluate their significance. Moreover, we present advances in introducing electronic conductivity in the polymer binder in the catalyst layers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent progress in alkaline water electrolysis for hydrogen production and applications
Zeng, K., & Zhang, D. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.002 · Cited by 3,611
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Kreuer, K.-D., Paddison, S. J., Spohr, E., & Schuster, M. (2004) · Chemical Reviews · doi:10.1021/cr020715f · Cited by 2,187
Wang, Y.-J., Zhao, N., Fang, B., Li, H., Bi, X. T., & Wang, H. (2015) · Chemical Reviews · doi:10.1021/cr500519c · Cited by 1,267
Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044337 · Cited by 1,251
High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review
Chandan, A., Hattenberger, M., El-kharouf, A., Du, S., Dhir, A., Self, V., Pollet, B. G., Ingram, A., & Bujalski, W. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.126 · Cited by 926
Modeling Transport in Polymer-Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2004) · Chemical Reviews · doi:10.1021/cr020729l · Cited by 738
Schuster, M., Rager, T., Noda, A., Kreuer, K. D., & Maier, J. (2005) · Fuel Cells · doi:10.1002/fuce.200400059 · Cited by 325
Investigation of the conduction properties of phosphoric and sulfuric acid doped polybenzimidazole
Glipa, X., Bonnet, B., Mula, B., Jones, D. J., & Rozière, J. (1999) · Journal of Materials Chemistry · doi:10.1039/a906060j · Cited by 315
Jung, D. H., Cho, S. Y., Peck, D. H., Shin, D. R., & Kim, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00095-8 · Cited by 238 · cited 1×
“Although the proton conductivities of the nanocomposite membranes were lower than that of pure PBI membranes, the performance of the MEAs was higher than the commercial Nafion [74,75].”
Background
Cited by
Water Electrolysis toward Elevated Temperature: Advances, Challenges and Frontiers
Zhang, W., Liu, M., Gu, X., Shi, Y., Deng, Z., & Cai, N. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00573 · Cited by 441
Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges
Tellez-Cruz, M. M., Escorihuela, J., Solorza-Feria, O., & Compañ, V. (2021) · Polymers · doi:10.3390/polym13183064 · Cited by 414
Triple ionic–electronic conducting oxides for next-generation electrochemical devices
Papac, M., Stevanović, V., Zakutayev, A., & O’Hayre, R. (2021) · Nature Materials · doi:10.1038/s41563-020-00854-8 · Cited by 349
Low-temperature water electrolysis: fundamentals, progress, and new strategies
Li, W., Tian, H., Ma, L., Wang, Y., Liu, X., & Gao, X. (2022) · Materials Advances · doi:10.1039/d2ma00185c · Cited by 312
Progress in hybrid composite Nafion®-based membranes for proton exchange fuel cell application
Prykhodko, Y., Fatyeyeva, K., Hespel, L., & Marais, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127329 · Cited by 260
Metadata
- Authors
- Sun, X., Simonsen, S., Norby, T., & Chatzitakis, A.
- Venue
- Membranes
- Publisher
- MDPI AG
- Published
- 2019-07-11
- Volume
- 9
- Issue
- 7
- Pages
- 83
- ISSN
- 2077-0375 (ISSN-L)
- OpenAlex
- W2956162774
- Cited by
- 205
- References
- 10
- FWCI
- 7.58
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.