On the Physics of Machining Titanium Alloys: Interactions between Cutting Parameters, Microstructure and Tool Wear
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The current work deals with the analysis of mechanisms involved during the machining process of titanium alloys. Two different materials were chosen for the study: Ti-6Al-4V and Ti-55531. The objective was to understand the effect of all cutting parameters on the tool wear behavior and stability of the cutting process. The investigations were focused on the mechanisms of the chip formation process and their interaction with tool wear. At the microstructure scale, the analysis confirms the intense deformation of the machined surface and shows a texture modification. As the cutting speed increases, cutting forces and temperature show different progressions depending on the considered microstructure (Ti-6Al-4V or Ti-55531 alloy). Results show for both materials that the wear process is facilitated by the high cutting temperature and the generation of high stresses. The analysis at the chip-tool interface of friction and contact nature (sliding or sticking contact) shows that machining Ti55531 often exhibits an abrasion wear process on the tool surface, while the adhesion and diffusion modes followed by the coating delamination process are the main wear modes when machining the usual Ti-6Al-4V alloy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rapid thermal conductivity measurement with a hot disk sensor
He, Y. (2005) · Thermochimica Acta · doi:10.1016/j.tca.2005.06.026 · Cited by 459
New observations on the mechanism of chip formation when machining titanium alloys
Komanduri, R., & Von Turkovich, B. F. (1981) · Wear · doi:10.1016/0043-1648(81)90242-8 · Cited by 405
Nouari, M., & Makich, H. (2013) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2013.04.011 · Cited by 117
Self-citation
Cited by
Sun, D., Lemoine, P., Keys, D., Doyle, P., Malinov, S., Zhao, Q., Qin, X., & Jin, Y. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9850-3 · Cited by 80
Experimental Parametric Relationships for Chip Geometry in Dry Machining of the Ti6Al4V Alloy
Sánchez Hernández, Y., Trujillo Vilches, F. J., Bermudo Gamboa, C., & Sevilla Hurtado, L. (2018) · Materials · doi:10.3390/ma11071260 · Cited by 36
Assessment of Machinability of Ti6Al4V Alloy Under Dry Conditions
Younas, M., Mohammed Sambo, A., Asim, T., & Saharudin, S. (2024) · MATEC Web of Conferences · doi:10.1051/matecconf/202440106005 · Cited by 2
Metadata
- Authors
- Nouari, M., & Makich, H.
- Venue
- Metals
- Publisher
- MDPI AG
- Published
- 2014-07-07
- Volume
- 4
- Issue
- 3
- Pages
- 335-358
- ISSN
- 2075-4701 (ISSN-L)
- OpenAlex
- W2023490812
- Cited by
- 78
- References
- 3
- FWCI
- 5.06
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On the Physics of Machining Titanium Alloys: Interactions between Cutting Parameters, Microstructure and Tool Wear. https://app.cochat.ai/papers/10.3390/met4030335
- The paper
- Nouari, M., & Makich, H. (2014). On the Physics of Machining Titanium Alloys: Interactions between Cutting Parameters, Microstructure and Tool Wear. Metals. https://doi.org/10.3390/met4030335
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.