The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Pore Structure and Fractal Characteristics of Different Shale Lithofacies in the Dalong Formation in the Western Area of the Lower Yangtze Platform
Open accessAbstract
The purpose of this article was to quantitatively investigate the pore structure and fractal characteristics of different lithofacies in the upper Permian Dalong Formation marine shale. Shale samples in this study were collected from well GD1 in the Lower Yangtze region for mineral composition, X-ray diffraction (XRD), and nitrogen adsorption–desorption analysis, as well as broad-ion beam scanning electron microscopy (BIB-SEM) observation. Experimental results showed that the TOC (total organic carbon) content and vitrinite reflectance (Ro) of the investigated shale samples were in the ranges 1.18–6.45% and 1.15–1.29%, respectively, showing that the Dalong Formation shale was in the mature stage. XRD results showed that the Dalong Formation shale was dominated by quartz ranging from 38.4% to 54.3%, followed by clay minerals in the range 31.7–37.5%, along with carbonate minerals (calcite and dolomite), with an average value of 9.6%. Based on the mineral compositions of the studied samples, the Dalong Formation shale can be divided into two types of lithofacies, namely siliceous shale facies and clay–siliceous mixed shale facies. In siliceous shale facies, which were mainly composed of organic pores, the surface area (SA) and pore volume (PV) were in the range of 5.20–10.91 m2/g and 0.035–0.046 cm3/g, respectively. Meanwhile, the pore size distribution (PSD) and fractal dimensions were in the range 14.2–26.1 nm and 2.511–2.609, respectively. I/S (illite-smectite mixed clay) was positively correlated with SA, PV, and fractal dimensions, while illite had a negative relationship with SA, PV, and fractal dimensions. I/S had a strong catalytic effect on organic matter for hydrocarbon generation, which was beneficial to the development of organic micropores, so I/S was conducive to pore structure complexity and the increase in SA and PV, while illite easily filled organic pores, which was not beneficial to the improvement of pore space. In clay–siliceous mixed shale facies, which mainly develop inorganic pores such as intergranular pores, SA and PV were in the range of 6.71–11.38 m2/g and 0.030–0.041 cm3/g, respectively. Meanwhile, PSD and fractal dimensions were in the range of 14.3–18.9 nm and 2.563–2.619, respectively. Quartz and I/S showed weak positive correlations with SA, PV, and fractal dimensions. The various compact modes between quartz particles and the disorder of I/S were conducive to the complexity of pore structure and the improvement of SA and PV. The research findings can provide a reference for the optimization and evaluation of shale gas favorable area of the Lower Yangtze Platform.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Recommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Jarvie, D. M., Hill, R. J., Ruble, T. E., & Pollastro, R. M. (2007) · AAPG Bulletin · doi:10.1306/12190606068 · Cited by 3,146
Ross, D. J. K., & Marc Bustin, R. (2009) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2008.06.004 · Cited by 2,217
Clarkson, C. R., Solano, N., Bustin, R. M., Bustin, A. M. M., Chalmers, G. R. L., He, L., Melnichenko, Y. B., Radliński, A. P., & Blach, T. P. (2013) · Fuel · doi:10.1016/j.fuel.2012.06.119 · Cited by 1,757
Organic matter-hosted pore system, Marcellus Formation (Devonian), Pennsylvania
Milliken, K. L., Rudnicki, M., Awwiller, D. N., & Zhang, T. (2013) · AAPG Bulletin · doi:10.1306/07231212048 · Cited by 1,150
Specific surface area and pore‐size distribution in clays and shales
Kuila, U., & Prasad, M. (2013) · Geophysical Prospecting · doi:10.1111/1365-2478.12028 · Cited by 1,126
Geological characteristics and resource potential of shale gas in China
Zou, C., Dong, D., Wang, S., Li, J., Li, X., Wang, Y., Li, D., & Cheng, K. (2010) · Petroleum Exploration and Development · doi:10.1016/s1876-3804(11)60001-3 · Cited by 1,112
Self-citationSlatt, R. M., & O'Brien, N. R. (2011) · AAPG Bulletin · doi:10.1306/03301110145 · Cited by 889
Tian, H., Pan, L., Xiao, X., Wilkins, R. W. T., Meng, Z., & Huang, B. (2013) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2013.07.008 · Cited by 540
Application of organic petrography in North American shale petroleum systems: A review
Hackley, P. C., & Cardott, B. J. (2016) · International Journal of Coal Geology · doi:10.1016/j.coal.2016.06.010 · Cited by 521
Characterization of tight gas reservoir pore structure using USANS/SANS and gas adsorption analysis
Clarkson, C. R., Freeman, M., He, L., Agamalian, M., Melnichenko, Y. B., Mastalerz, M., Bustin, R. M., Radliński, A. P., & Blach, T. P. (2012) · Fuel · doi:10.1016/j.fuel.2011.12.010 · Cited by 501
Bernard, S., Horsfield, B., Schulz, H.-M., Wirth, R., Schreiber, A., & Sherwood, N. (2011) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2011.05.010 · Cited by 499
Labani, M. M., Rezaee, R., Saeedi, A., & Hinai, A. A. (2013) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2013.11.022 · Cited by 463
Shale gas reservoir characterisation: A typical case in the southern Sichuan Basin of China
Chen, S., Zhu, Y., Wang, H., Liu, H., Wei, W., & Fang, J. (2011) · Energy · doi:10.1016/j.energy.2011.09.001 · Cited by 428
Liu, X., Xiong, J., & Liang, L. (2015) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2014.11.020 · Cited by 379
Characterizing the pore structure in the Silurian and Permian shales of the Sichuan Basin, China
Cao, T., Song, Z., Wang, S., Cao, X., Li, Y., & Xia, J. (2015) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2014.12.007 · Cited by 238
Determining fractal dimensions of coal pores by FHH model: Problems and effects
Zhang, S., Tang, S., Tang, D., Huang, W., & Pan, Z. (2014) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2014.10.018 · Cited by 225
Tian, H., Pan, L., Zhang, T., Xiao, X., Meng, Z., & Huang, B. (2015) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2015.01.004 · Cited by 218
Characterization of multi-scale microstructural features in Opalinus Clay
Keller, L. M., Schuetz, P., Erni, R., Rossell, M. D., Lucas, F., Gasser, P., & Holzer, L. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.11.029 · Cited by 185
Yang, C., Zhang, J., Wang, X., Tang, X., Chen, Y., Jiang, L., & Gong, X. (2017) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2017.07.021 · Cited by 102
Self-citationLiang, L., Xiong, J., & Liu, X. (2015) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2015.07.023 · Cited by 80
Dang, W., Zhang, J., Wei, X., Tang, X., Chen, Q., Li, Z., Zhang, M., & Liu, J. (2017) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2017.03.017 · Cited by 68
Self-citationDing, J., Zhang, J., Tang, X., Huo, Z., Han, S., Lang, Y., Zheng, Y., Li, X., & Liu, T. (2018) · Minerals · doi:10.3390/min8110509 · Cited by 68
Self-citationZhang, Y.-Y., He, Z.-L., Jiang, S. Y., Lu, S., Xiao, D. S., Chen, G.-H., & Zhao, J.-H. (2018) · Petroleum Science · doi:10.1007/s12182-018-0262-x · Cited by 22
Metadata
- Authors
- Xu, L., Zhang, J., Ding, J., Liu, T., Shi, G., Li, X., Dang, W., Cheng, Y., & Guo, R.
- Venue
- Minerals
- Publisher
- MDPI AG
- Published
- 2020-01-16
- Volume
- 10
- Issue
- 1
- Pages
- 72
- ISSN
- 2075-163X (ISSN-L)
- OpenAlex
- W3000476907
- Cited by
- 290
- References
- 26
- FWCI
- 10.06
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.