The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Research on the Adsorption Behavior of Heavy Metal Ions by Porous Material Prepared with Silicate Tailings
Open accessAbstract
Tailings generated from mineral processing have attracted worldwide concerns due to creating serious environmental pollution. In this work, porous adsorbents were prepared as a porous block by using silicate tailings, which can adsorb heavy metal ions from the solution and are easy to separate. The synthesized silicate porous material (SPM) was characterized by X-ray diffraction (XRD), Brunner–Emmet–Teller (BET), and scanning electron microscope (SEM). The material presented a surface area of 3.40 m2⸱g−1, a porosity of 54%, and the compressive strength of 0.6 MPa. The maximum adsorption capacities of Pb2+, Cd2+, and Cu2+ by SPM were 44.83 mg·g−1, 35.36 mg·g−1, and 32.26 mg·g−1, respectively. The experimental data were fitted well by the Freundlich and Langmuir adsorption models. The kinetics of the adsorption process were fitted well by the pseudo-first order kinetic equation. These results show that the porous materials prepared with silicate tailings could act as an effective and low-cost adsorbent for the removal of heavy metal ions from wastewater. This study may provide a new thought on the high-value utilization of tailing for alleviating environmental pressure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703 · cited 1×
“Various wastewater treatment techniques have been used for the removal of heavy metal ions [3], such as chemical precipitation [4,5], ion exchange [6], adsorption [2,7], membrane filtration [8], and electrochemical treatment [9].”
Critical review in adsorption kinetic models
Qiu, H., Lv, L., Pan, B.-C., Zhang, Q.-J., Zhang, W.-M., & Zhang, Q.-X. (2009) · Journal of Zhejiang University-SCIENCE A · doi:10.1631/jzus.a0820524 · Cited by 1,776
Nguyen, T. C., Loganathan, P., Nguyen, T. V., Vigneswaran, S., Kandasamy, J., & Naidu, R. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.047 · Cited by 309
Cited by
Shaba, E. Y., Jacob, J. O., Tijani, J. O., & Suleiman, M. A. T. (2021) · Applied Water Science · doi:10.1007/s13201-021-01370-z · Cited by 395
Fly ash-based adsorbent for adsorption of heavy metals and dyes from aqueous solution: a review
Aigbe, U. O., Ukhurebor, K. E., Onyancha, R. B., Osibote, O. A., Darmokoesoemo, H., & Kusuma, H. S. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.140 · Cited by 264
Ugwu, E. I., Othmani, A., & Nnaji, C. C. (2022) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-021-03560-3 · Cited by 105
Metadata
- Authors
- Ouyang, D., Zhuo, Y., Hu, L., Zeng, Q., Hu, Y., & He, Z.
- Venue
- Minerals
- Publisher
- MDPI AG
- Published
- 2019-05-11
- Volume
- 9
- Issue
- 5
- Pages
- 291
- ISSN
- 2075-163X (ISSN-L)
- OpenAlex
- W2944627137
- Cited by
- 182
- References
- 3
- FWCI
- 9.68
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Research on the Adsorption Behavior of Heavy Metal Ions by Porous Material Prepared with Silicate Tailings. https://app.cochat.ai/papers/10.3390/min9050291
- The paper
- Ouyang, D., Zhuo, Y., Hu, L., Zeng, Q., Hu, Y., & He, Z. (2019). Research on the Adsorption Behavior of Heavy Metal Ions by Porous Material Prepared with Silicate Tailings. Minerals. https://doi.org/10.3390/min9050291
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.