Production of Biosurfactant Produced from Used Cooking Oil by Bacillus sp. HIP3 for Heavy Metals Removal
Open accessThe DOI matches its Crossref record; 60 of the 62 references it cites were found in a registry or an index.
Abstract
Heavy metals from industrial effluents and sewage contribute to serious water pollution in most developing countries. The constant penetration and contamination of heavy metals into natural water sources may substantially raise the chances of human exposure to these metals through ingestion, inhalation, or skin contact, which could lead to liver damage, cancer, and other severe conditions in the long term. Biosurfactant as an efficient biological surface-active agent may provide an alternative solution for the removal of heavy metals from industrial wastes. Biosurfactants exhibit the properties of reducing surface and interfacial tension, stabilizing emulsions, promoting foaming, high selectivity, and specific activity at extreme temperatures, pH, and salinity, and the ability to be synthesized from renewable resources. This study aimed to produce biosurfactant from renewable feedstock, which is used cooking oil (UCO), by a local isolate, namely Bacillus sp. HIP3 for heavy metals removal. Bacillus sp. HIP3 is a Gram-positive isolate that gave the highest oil displacement area with the lowest surface tension, of 38 mN/m, after 7 days of culturing in mineral salt medium and 2% (v/v) UCO at a temperature of 30 °C and under agitation at 200 rpm. An extraction method, using chloroform:methanol (2:1) as the solvents, gave the highest biosurfactant yield, which was 9.5 g/L. High performance liquid chromatography (HPLC) analysis confirmed that the biosurfactant produced by Bacillus sp. HIP3 consists of a lipopeptide similar to standard surfactin. The biosurfactant was capable of removing 13.57%, 12.71%, 2.91%, 1.68%, and 0.7% of copper, lead, zinc, chromium, and cadmium, respectively, from artificially contaminated water, highlighting its potential for bioremediation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures




Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Several adsorbents derived from blast furnace sludge, slag, soot, fly ash, black liquor lignin, and red mud, as well as NaP zeolites prepared from lithium silica powder and biosurfactants synthesized from petroleum plant waste-rich in lipids and other sustainable carbon source nutrients are effective in removing toxic heavy metals such as copper, lead, zinc, chromium, and cadmium from wastewater (”
From Recycling municipal, agricultural and industrial waste into energy, fertilizers, food and construction materials, and economic feasibility: a review (2023) · cites this paper as Md Badrul Hisham et al. 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Environmental applications for biosurfactants
Mulligan, C. N. (2005) · Environmental Pollution · doi:10.1016/j.envpol.2004.06.009 · Cited by 1,537 · cited 1×
“The property of a microbial surfactant to chelate toxic heavy metals and form an insoluble precipitate was seen as the perfect solution to the treatment of heavy metals in wastewater due to its greater environmental compatibility, lower toxicity, and higher biodegradability than synthetic surfactants [12].”
BackgroundEnvironmental Applications of Biosurfactants: Recent Advances
Pacwa-Płociniczak, M., Płaza, G. A., Piotrowska-Seget, Z., & Cameotra, S. S. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12010633 · Cited by 961 · cited 1×
“Numerous characteristics of biosurfactants, such as foaming, dispersion, wetting, emulsification/de-emulsification, and coating make them suitable to be applied in the physicochemical and biological remediation technologies of both organic and metal contaminants [10].”
BackgroundArima, K., Kakinuma, A., & Tamura, G. (1968) · Biochemical and Biophysical Research Communications · doi:10.1016/0006-291x(68)90503-2 · Cited by 908
Heavy metal adsorption by modified oak sawdust: Thermodynamics and kinetics
Argun, M. E., Dursun, S., Ozdemir, C., & Karatas, M. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.095 · Cited by 836 · cited 1×
“They may lead to bioaccumulation in living organisms, causing health problems in animals, plants, and human beings if left untreated in the environment [11].”
BackgroundBanat, I. M. (1995) · Bioresource Technology · doi:10.1016/0960-8524(94)00101-6 · Cited by 746 · cited 1×
“The interest in microbial surfactants or biosurfactants has increased steadily in recent years, mainly due to the possibility of production from wastes and their environmentally friendly nature [4].”
BackgroundOlaniran, A., Balgobind, A., & Pillay, B. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms140510197 · Cited by 652 · cited 2×
“This would permit the direct contact between the biosurfactant and the sorbed metal [14].”
BackgroundOverview of the production of biodiesel from Waste cooking oil
Yaakob, Z., Mohammad, M., Alherbawi, M., Alam, Z., & Sopian, K. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.016 · Cited by 616 · cited 1×
“The most common cooking oil in Malaysia is made from oil palm because of its availability and low price relative to other sources, such as olive, corn, or coconut plants [1].”
BackgroundA study on the structure–function relationship of lipopeptide biosurfactants
Morikawa, M., Hirata, Y., & Imanaka, T. (2000) · Biochimica et Biophysica Acta (BBA) - Molecular and Cell Biology of Lipids · doi:10.1016/s1388-1981(00)00124-4 · Cited by 612
Advances in utilization of renewable substrates for biosurfactant production
Makkar, R. S., Cameotra, S. S., & Banat, I. M. (2011) · AMB Express · doi:10.1186/2191-0855-1-5 · Cited by 470 · cited 1×
“Thus, many fractionation processes use some form of separation, in which solutes with high surface activity (biosurfactant) are preferentially adsorbed at the interface between a gas phase and bulk liquid phase and are then removed, for example by foaming [36,43,44].”
BackgroundBodour, A. A., & Miller-Maier, R. M. (1998) · Journal of Microbiological Methods · doi:10.1016/s0167-7012(98)00031-1 · Cited by 457 · cited 1×
“Surface Activity Measurements The surface tension of cell-free culture broth (previously centrifuged at 10,000 rpm and 4 ◦C for 20 min) was measured by the Du Nuoy–Padday method [62] using an AquaPi+ model tensiometer (Kibron, Helsinki, Finland).”
Method
Research works printed but not linked: 2
- 22. Pandey, A.; Anis, R. Optimization and characterization of biosurfactant producing microbes isolated from oil contaminated soil and expression of biosurfactant genes in E.coli. Int. J. Pharm. Res. Bio-Sci. 2013, 2, 46-67.
- 54. Mohammed, A.S.; Kapri, A.; Goel, R. Use of Biosurfactants in the Removal of Heavy Metal Ions from Soils; Springer: Dordrecht, The Netherlands, 2011; Volume 20, ISBN 978-94-007-1913-2.
Cited by
Peng, X., Jiang, Y., Chen, Z., Osman, A. I., Farghali, M., Rooney, D. W., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01551-5 · Cited by 333
Biosurfactant is a powerful tool for the bioremediation of heavy metals from contaminated soils
Mishra, S., Lin, Z., Pang, S., Zhang, Y., Bhatt, P., & Chen, S. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126253 · Cited by 246
Sarker, A., Masud, M. A. A., Deepo, D. M., Das, K., Nandi, R., Ansary, M. W. R., Islam, A. R. M. T., & Islam, T. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138861 · Cited by 197
Gaur, V. K., Sharma, P., Sirohi, R., Varjani, S., Taherzadeh, M. J., Chang, J.-S., Yong Ng, H., Wong, J. W. C., & Kim, S.-H. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2021.126059 · Cited by 186
Ambaye, T. G., Vaccari, M., Prasad, S., & Rtimi, S. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.102090 · Cited by 158
Metadata
- Authors
- Md Badrul Hisham, N. H., Ibrahim, M. F., Ramli, N., & Abd-Aziz, S.
- Affiliations
- Department of Bioprocess Technology, Faculty of Biotechnology and Biomolecular Sciences, Universiti Putra Malaysia, 43400 UPM Serdang, Malaysia
- Universiti Putra Malaysia (MY)
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2019-07-18
- Volume
- 24
- Issue
- 14
- Pages
- 2617
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC6681096
- OpenAlex
- W2958061494
- Cited by
- 129
- References
- 62
- Citations by year
- 2026: 13 · 2025: 13 · 2024: 26 · 2023: 19 · 2022: 25 · 2021: 26 · 2020: 7
- FWCI
- 4.34
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) (acceptedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry of Higher Education, Malaysia (FRGS 2014-2)
- Topics
- Physical Sciences › Environmental Science › Pollution › Microbial bioremediation and biosurfactants
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surfactants and Colloidal Systems
- Physical Sciences › Environmental Science › Environmental Chemistry › Environmental Chemistry and Analysis
- Keywords
- biosurfactant production, waste cooking oil, heavy metal removal, lipopeptide biosurfactant, surfactin, copper, lead, zinc, chromium, cadmium, bioremediation, water pollution, surface tension, chloroform-methanol extraction, industrial wastewater
- MeSH terms
- Adsorption, Bacillus, Bacterial Proteins, Biodegradation, Environmental, Dietary Fats, Unsaturated, Phylogeny, Surface-Active Agents, Metals, Heavy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.