Production of Biosurfactant Produced from Used Cooking Oil by Bacillus sp. HIP3 for Heavy Metals Removal
Open accessThe DOI matches its Crossref record; 60 of the 62 references it cites were found in a registry or an index.
Abstract
Heavy metals from industrial effluents and sewage contribute to serious water pollution in most developing countries. The constant penetration and contamination of heavy metals into natural water sources may substantially raise the chances of human exposure to these metals through ingestion, inhalation, or skin contact, which could lead to liver damage, cancer, and other severe conditions in the long term. Biosurfactant as an efficient biological surface-active agent may provide an alternative solution for the removal of heavy metals from industrial wastes. Biosurfactants exhibit the properties of reducing surface and interfacial tension, stabilizing emulsions, promoting foaming, high selectivity, and specific activity at extreme temperatures, pH, and salinity, and the ability to be synthesized from renewable resources. This study aimed to produce biosurfactant from renewable feedstock, which is used cooking oil (UCO), by a local isolate, namely Bacillus sp. HIP3 for heavy metals removal. Bacillus sp. HIP3 is a Gram-positive isolate that gave the highest oil displacement area with the lowest surface tension, of 38 mN/m, after 7 days of culturing in mineral salt medium and 2% (v/v) UCO at a temperature of 30 °C and under agitation at 200 rpm. An extraction method, using chloroform:methanol (2:1) as the solvents, gave the highest biosurfactant yield, which was 9.5 g/L. High performance liquid chromatography (HPLC) analysis confirmed that the biosurfactant produced by Bacillus sp. HIP3 consists of a lipopeptide similar to standard surfactin. The biosurfactant was capable of removing 13.57%, 12.71%, 2.91%, 1.68%, and 0.7% of copper, lead, zinc, chromium, and cadmium, respectively, from artificially contaminated water, highlighting its potential for bioremediation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures




Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Several adsorbents derived from blast furnace sludge, slag, soot, fly ash, black liquor lignin, and red mud, as well as NaP zeolites prepared from lithium silica powder and biosurfactants synthesized from petroleum plant waste-rich in lipids and other sustainable carbon source nutrients are effective in removing toxic heavy metals such as copper, lead, zinc, chromium, and cadmium from wastewater (”
From Recycling municipal, agricultural and industrial waste into energy, fertilizers, food and construction materials, and economic feasibility: a review (2023) · cites this paper as Md Badrul Hisham et al. 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Environmental applications for biosurfactants
Mulligan, C. N. (2005) · Environmental Pollution · doi:10.1016/j.envpol.2004.06.009 · Cited by 1,537 · cited 1×
“The property of a microbial surfactant to chelate toxic heavy metals and form an insoluble precipitate was seen as the perfect solution to the treatment of heavy metals in wastewater due to its greater environmental compatibility, lower toxicity, and higher biodegradability than synthetic surfactants [12].”
BackgroundEnvironmental Applications of Biosurfactants: Recent Advances
Pacwa-Płociniczak, M., Płaza, G. A., Piotrowska-Seget, Z., & Cameotra, S. S. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12010633 · Cited by 961 · cited 1×
“Numerous characteristics of biosurfactants, such as foaming, dispersion, wetting, emulsification/de-emulsification, and coating make them suitable to be applied in the physicochemical and biological remediation technologies of both organic and metal contaminants [10].”
BackgroundArima, K., Kakinuma, A., & Tamura, G. (1968) · Biochemical and Biophysical Research Communications · doi:10.1016/0006-291x(68)90503-2 · Cited by 908
Heavy metal adsorption by modified oak sawdust: Thermodynamics and kinetics
Argun, M. E., Dursun, S., Ozdemir, C., & Karatas, M. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.095 · Cited by 836 · cited 1×
“They may lead to bioaccumulation in living organisms, causing health problems in animals, plants, and human beings if left untreated in the environment [11].”
BackgroundBanat, I. M. (1995) · Bioresource Technology · doi:10.1016/0960-8524(94)00101-6 · Cited by 746 · cited 1×
“The interest in microbial surfactants or biosurfactants has increased steadily in recent years, mainly due to the possibility of production from wastes and their environmentally friendly nature [4].”
BackgroundOlaniran, A., Balgobind, A., & Pillay, B. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms140510197 · Cited by 652 · cited 2×
“This would permit the direct contact between the biosurfactant and the sorbed metal [14].”
BackgroundOverview of the production of biodiesel from Waste cooking oil
Yaakob, Z., Mohammad, M., Alherbawi, M., Alam, Z., & Sopian, K. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.016 · Cited by 616 · cited 1×
“The most common cooking oil in Malaysia is made from oil palm because of its availability and low price relative to other sources, such as olive, corn, or coconut plants [1].”
BackgroundA study on the structure–function relationship of lipopeptide biosurfactants
Morikawa, M., Hirata, Y., & Imanaka, T. (2000) · Biochimica et Biophysica Acta (BBA) - Molecular and Cell Biology of Lipids · doi:10.1016/s1388-1981(00)00124-4 · Cited by 612
Advances in utilization of renewable substrates for biosurfactant production
Makkar, R. S., Cameotra, S. S., & Banat, I. M. (2011) · AMB Express · doi:10.1186/2191-0855-1-5 · Cited by 470 · cited 1×
“Thus, many fractionation processes use some form of separation, in which solutes with high surface activity (biosurfactant) are preferentially adsorbed at the interface between a gas phase and bulk liquid phase and are then removed, for example by foaming [36,43,44].”
BackgroundBodour, A. A., & Miller-Maier, R. M. (1998) · Journal of Microbiological Methods · doi:10.1016/s0167-7012(98)00031-1 · Cited by 457 · cited 1×
“Surface Activity Measurements The surface tension of cell-free culture broth (previously centrifuged at 10,000 rpm and 4 ◦C for 20 min) was measured by the Du Nuoy–Padday method [62] using an AquaPi+ model tensiometer (Kibron, Helsinki, Finland).”
MethodUse of the Gram stain in microbiology
Beveridge, T. J. (2001) · Biotechnic & Histochemistry · doi:10.1080/714028139 · Cited by 406 · cited 1×
“The four biosurfactant producers were subjected to Gram staining in order to characterize the bacterial isolates based on their cell wall constituents between two large groups of bacteria, Gram positive or Gram negative [23].”
MethodPereira, J. F. B., Gudiña, E. J., Costa, R., Vitorino, R., Teixeira, J. A., Coutinho, J. A. P., & Rodrigues, L. R. (2013) · Fuel · doi:10.1016/j.fuel.2013.04.040 · Cited by 378 · cited 3×
“Fermentation studies by Pereira et al. (2013) [48] using LB medium supplemented with 10% (v/v) sucrose as a carbon source resulted in a maximum biosurfactant yield of 2.16 g/L from B. subtilis, isolated from Brazilian crude oils.”
MethodInfluentialVater, J., Kablitz, B., Wilde, C., Franke, P., Mehta, N., & Cameotra, S. S. (2002) · Applied and Environmental Microbiology · doi:10.1128/aem.68.12.6210-6219.2002 · Cited by 365 · cited 3×
“It was weighed to record the amount and stored at 4 ◦C for further analysis [63].”
MethodHaba, E., Espuny, M. J., Busquets, M., & Manresa, A. (2000) · Journal of Applied Microbiology · doi:10.1046/j.1365-2672.2000.00961.x · Cited by 331
Mnif, I., & Ghribi, D. (2015) · Peptide Science · doi:10.1002/bip.22630 · Cited by 331 · cited 2×
“Surfactin produced by the Bacillus species is the most effective biosurfactant, reducing water surface tension from 72 to 27 mN/m [38,41,49].”
BackgroundBatista, S. B., Mounteer, A. H., Amorim, F. R., & Tótola, M. R. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.04.020 · Cited by 326 · cited 1×
“The direct isolation of the biosurfactant producer was performed by diluting and plating the sample on nutrient agar plates [59].”
MethodAl-Bahry, S. N., Al-Wahaibi, Y. M., Elshafie, A. E., Al-Bemani, A. S., Joshi, S. J., Al-Makhmari, H. S., & Al-Sulaimani, H. S. (2013) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2012.01.006 · Cited by 240 · cited 4×
“As studied by Al-Bahry et al. (2013) [34], members from the genus Bacillus are considered as a group suitable for the industrial production of biosurfactants because the species within this taxon, such as Bacillus licheniformis and Bacillus subtilis, are well known as the producers of surface…”
BackgroundInfluentialElazzazy, A. M., Abdelmoneim, T. S., & Almaghrabi, O. A. (2015) · Saudi Journal of Biological Sciences · doi:10.1016/j.sjbs.2014.11.018 · Cited by 189 · cited 1×
“These outcomes revealed that the biosurfactant biosynthesis from UCO occurred predominantly throughout the exponential growth phase, suggesting that the biosurfactant is a primary metabolite and produced accompanying cellular biomass formation due to the production of growth-associated kinetics [36,37].”
Background(2010) · University of Zagreb University Computing Centre (SRCE) · Cited by 174
Kurstakins: A New Class of Lipopeptides Isolated from Bacillus thuringiensis
Hathout, Y., Ho, Y.-P., Ryzhov, V., Demirev, P., & Fenselau, C. (2000) · Journal of Natural Products · doi:10.1021/np000169q · Cited by 171
Biosurfactant of marine origin exhibiting heavy metal remediation properties
Das, P., Mukherjee, S., & Sen, R. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.05.028 · Cited by 165 · cited 4×
“(2009) [56] and Singh and Cameotra (2013) [55], which can remove 100% lead and 97.”
BackgroundResultInfluentialCharacterization of the surface tension of vegetable oils to be used as fuel in diesel engines
Esteban, B., Riba, J., Baquero, G., Puig, R., & Rius, A. (2012) · Fuel · doi:10.1016/j.fuel.2012.07.042 · Cited by 161 · cited 1×
“Most of the free fatty acid percentages of the used cooking oil (UCO) used in this study were high when compared with a study conducted by [17] for unused palm oil, except for the palmitic acid.”
MethodThavasi, R., Jayalakshmi, S., Balasubramanian, T., & Banat, I. M. (2007) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-007-9609-y · Cited by 160 · cited 2×
“(2008) [47] to extract maximum glycolipid (7.”
Singh, A. K., & Cameotra, S. S. (2013) · Environmental Science and Pollution Research · doi:10.1007/s11356-013-1752-4 · Cited by 156 · cited 6×
“This study also shows the potential of removing 12.7% lead and 0.7% cadmium, which is lower than the studies reported by Das et al. (2009) [56] and Singh and Cameotra (2013) [55], which can remove 100% lead and 97.66% cadmium and 40.3% lead and 44.2% cadmium, respectively.”
BackgroundMethodResultInfluentialBiosurfactant production by microorganisms on unconventional carbon sources
Makkar, R. S., & Cameotra, S. S. (1999) · Journal of Surfactants and Detergents · doi:10.1007/s11743-999-0078-3 · Cited by 144 · cited 1×
“The used cooking oil from domestic waste also contains an appropriate balance of nutrients to support optimum bacterial growth and the synthesis of biosurfactants [7,9].”
BackgroundHealth aspects of thermoxidized oils and fats
Billek, G. (2000) · European Journal of Lipid Science and Technology · doi:10.1002/1438-9312(200009)102:8/9<566::aid-ejlt566>3.0.co;2-b · Cited by 137
Isolation and Analysis of Lipopeptides and High Molecular Weight Biosurfactants
Smyth, T. J., Perfumo, A., McClean, S., Marchant, R., & Banat, I. M. (2009) · Springer eBooks · doi:10.1007/978-3-540-77587-4_290 · Cited by 125
Chandankere, R., Yao, J., Choi, M. M. F., Masakorala, K., & Chan, Y. (2013) · Biochemical Engineering Journal · doi:10.1016/j.bej.2013.02.018 · Cited by 109 · cited 7×
“(2013) [36] reported nearly the same growth pattern of biosurfactant-producer Bacillus methylotrophicus USTBa, isolated from a petroleum reservoir.”
BackgroundMethodInfluentialApplication of biosurfactants in environmental biotechnology; remediation of oil and heavy metal
Usman, M. M., Dadrasnia, A., Lim, K. T., Mahmud, A. F., & Ismail, S. B. (2016) · AIMS bioengineering · doi:10.3934/bioeng.2016.3.289 · Cited by 109
Varadavenkatesan, T., & Murty, V. R. (2013) · ISRN Microbiology · doi:10.1155/2013/621519 · Cited by 97 · cited 3×
“The paste was dried by heating in a hot air oven set at 50–70 ◦C until a constant weight was attained, without allowing the cells to be charred [24].”
MethodResultCharacterization of Waste Frying Oils Obtained from Different Facilities
Şanlı, H., Çanakçı, M., & Alptekin, E. (2011) · Linköping electronic conference proceedings · doi:10.3384/ecp11057479 · Cited by 93 · cited 1×
“water treatment and waste management costs, and consequently generates undesirable impacts to the entire environmental system [3].”
BackgroundMolecular Genetics of Biosurfactant Synthesis in Microorganisms
Satpute, S., Bhuyan, S. S., Pardesi, K. R., Mujumdar, S. S., Dhakephalkar, P. K., Shete, A. M., & Chopade, B. A. (2010) · Advances in experimental medicine and biology · doi:10.1007/978-1-4419-5979-9_2 · Cited by 84 · cited 1×
“Surfactin produced by the Bacillus species is the most effective biosurfactant, reducing water surface tension from 72 to 27 mN/m [38,41,49].”
BackgroundRecovery and conversion of palm olein-derived used frying oil to methyl esters for biodiesel.
Loh, S. K., YuenMay, C., SitFoon, C., & AhNgan, M. (2006) · Journal of Oil Palm Research · Cited by 84
Kavitha, V., Mandal, A. B., & Gnanamani, A. (2014) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2014.04.028 · Cited by 79 · cited 1×
“While the marine isolate, Bacillus licheniformis MTCC 5514, was proven as rod-shaped, Gram positive bacteria, which can solubilize or remove crude-oil contamination from different soils in an aqueous phase [25].”
BackgroundXia, W., Luo, Z.-B., Dong, H., Li, Y., Cui, Q., & Bi, Y. (2011) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-011-9501-y · Cited by 77 · cited 2×
“The temperature profile for PCR was 94 ◦C for 5 min (1 cycle), 94 ◦C for 1 min, 55 ◦C for 45 s, and 72 ◦C for 45 s (30 cycles); and 72 ◦C for 1 min after the final cycle [61].”
BackgroundMethodBiodegradation of fomesafen by strain Lysinibacillus sp. ZB-1 isolated from soil
Liang, B., Lu, P., Li, H., Li, R., Li, S., & Huang, X. (2009) · Chemosphere · doi:10.1016/j.chemosphere.2009.09.033 · Cited by 67 · cited 1×
“(2009) [33] stated that Lysinibacillus sp.”
Wisjnuprapto, N. A., Helmy, Q., Kardena, E., & Funamizu, N. (2011) · International Journal of Biotechnology · doi:10.1504/ijbt.2011.042682 · Cited by 66 · cited 1×
“The most widely used solvents are mixtures of chloroform and methanol in a number of ratios, which facilitates adjustment of the polarity of the extraction agent to the target extractable material [39,40].”
Surface‐active properties of antifungal lipopeptides produced byBacillus subtilis
Thimon, L., Peyoux, F., Maget‐Dana, R., & Michel, G. (1992) · Journal of the American Oil Chemists Society · doi:10.1007/bf02635884 · Cited by 64
de Oliveira, J. G., & García-Cruz, C. H. (2013) · Brazilian Archives of Biology and Technology · doi:10.1590/s1516-89132013000100020 · Cited by 60 · cited 8×
“The growth phase and surface activity of Bacillus sp. HIP3 in MSM with 2% (v/v) UCO as the sole carbon substrate, at 30 °C and 200 rpm for 7 days, is presented in Figure 2.”
BackgroundMethodInfluentialAbidin, S. Z., Patel, D., & Saha, B. (2013) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.21848 · Cited by 60
Unraveling interactions in microbial communities - from co-cultures to microbiomes
Tan, J., Zuniga, C., & Zengler, K. (2015) · Journal of Microbiology · doi:10.1007/s12275-015-5060-1 · Cited by 59 · cited 1×
“These three sources were selected for microbial isolation due to their richness and diverse microbial community in the natural degradation of oil [19].”
BackgroundAguilar, M. (2003) · Humana Press eBooks · doi:10.1385/1592597424 · Cited by 58
Sousa, M., Dantas, I. T., Feitosa, F. X., de Alencar, A. E. V., Soares, S. D. A., Melo, V. M. M., Gonçalves, L. R. B., & de Sant’Ana, H. B. (2014) · Brazilian Journal of Chemical Engineering · doi:10.1590/0104-6632.20140313s00002766 · Cited by 56 · cited 4×
“The several peaks in Figure 3a show that the biosurfactant that was produced demonstrated the main characteristic groups of a surfactin molecule, indicating the presence of aliphatic hydrocarbon, as well as a peptide fraction [51].”
BackgroundResultInfluentialRemoval of Mercury by Foam Fractionation Using Surfactin, a Biosurfactant
Chen, H., Chen, C., Reddy, A. S., Chen, C., Li, W. R., Tseng, M., Li, W. R., Pan, W., Maity, J. P., & Atla, S. B. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12118245 · Cited by 49 · cited 1×
“Thus, many fractionation processes use some form of separation, in which solutes with high surface activity (biosurfactant) are preferentially adsorbed at the interface between a gas phase and bulk liquid phase and are then removed, for example by foaming [36,43,44].”
BackgroundZhou, H., Chen, J., Yang, Z. W., Qin, B. Q., Li, Y., & Kong, X. (2015) · Annals of Microbiology · doi:10.1007/s13213-015-1066-5 · Cited by 47 · cited 2×
“This is similar to Zhou et al. (2015) [26], who found out that Bacillus sp. ZG0427 was a Gram-positive and spore-forming bacterium whose morphological and biochemical properties were closely related to species of genus Bacillus.”
BackgroundResultLima, T. M. S., Procópio, L. C., Brandão, F. D., de Carvalho, A. M. X., Tótola, M. R., & Borges, A. C. (2011) · Biodegradation · doi:10.1007/s10532-011-9459-z · Cited by 38 · cited 4×
“This is also supported by Lima et al. (2011) [57], as they successfully removed 99.26% cadmium by using 0.3 mg/mL of lipopeptide biosurfactants, namely surfactin, iturin, and fengycin, produced by B. subtilis LBBMA 111A.”
MethodInfluentialMadhaiyan, M., Poonguzhali, S., Lee, J., Lee, K., & Kuppusamy, H. (2011) · Antonie van Leeuwenhoek · doi:10.1007/s10482-011-9600-3 · Cited by 37
A novel dichloromethane-degrading Lysinibacillus sphaericus strain wh22 and its degradative plasmid
Wu, S., Hu, Z.-H., Zhang, L. L., Xiang, Y., & Chen, J. M. (2009) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-009-1873-3 · Cited by 34 · cited 2×
“(2009) [28] stated that these genera have the ability to catabolize many natural and xenobiotic compounds, such as polynuclear aromatic hydrocarbons.”
BackgroundAnburajan, L., Meena, B., Rangamaran, V. R., Shridhar, D., Joseph, T. C., Vinithkumar, N. V., Dharani, G., Dheenan, P. S., & Kirubagaran, R. (2015) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-015-1359-x · Cited by 33 · cited 2×
“(2014) [52] also reported the presence of an additional peak in the chromatogram of the biosurfactant sample from .”
BackgroundPseudomonas aeruginosa is Present in Crude Oil Contaminated Sites of Barmer Region (India)
Prakash, B., & Irfan, M. (2011) · Journal of Bioremediation & Biodegradation · doi:10.4172/2155-6199.1000129 · Cited by 33 · cited 2×
“The pure cultures obtained were then screened using Bushnell and Haas (BH) agar, in order to find the oil-degrading microorganisms, by adding UCO as the sole carbon source onto the agar [20].”
MethodBiosurfactant’s Role in Bioremediation of NAPL and Fermentative Production
Joshi, S. J., & Desai, A. J. (2010) · Advances in experimental medicine and biology · doi:10.1007/978-1-4419-5979-9_17 · Cited by 32 · cited 1×
“The most widely used solvents are mixtures of chloroform and methanol in a number of ratios, which facilitates adjustment of the polarity of the extraction agent to the target extractable material [39,40].”
das Neves, L. C. M., de Oliveira, K. S., Kobayashi, M. J., Penna, T. C. V., & Converti, A. (2007) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-007-9078-7 · Cited by 26 · cited 2×
“(2007) [35] stated that the Bacillaceae family does not only synthesize good iosurfactants, but also has the ability to grow under anaerobic or facultative e viro ments.”
BackgroundApplication of a Low Cost Biosurfactant in the Removal of Heavy Metals in Soil
Sarubbo, L. A., Brasileiro, P. P. F., Silveira, G. A., Luna, J. M. D., Rufino, R. D., & Santos, A. D., V (2018) · Chemical engineering transactions · doi:10.3303/cet1864073 · Cited by 23
Bioreduction of Cr (VI) by Biosurfactant Producing Marine Bacterium Bacillus subtilis SHB 13
Swapna, T. H., Papathoti, N. K., KHAN, M., Reddy, G. S. N., & Hameeda, B. (2016) · Cited by 22
Enrichment and Purification of Lipopeptide Biosurfactants
Baker, S. C., & Chen, C. (2010) · Advances in experimental medicine and biology · doi:10.1007/978-1-4419-5979-9_21 · Cited by 21 · cited 2×
“However, solutes with lower surface activity tend to remain in the bulk aqueous phase and can be extracted by the use of organic solvents [42,45].”
BackgroundBacillus huizhouensis sp. nov., isolated from a paddy field soil
Li, J., Yang, G., Wu, M., Zhao, Y., & Zhou, S. (2014) · Antonie van Leeuwenhoek · doi:10.1007/s10482-014-0208-2 · Cited by 21 · cited 3×
“(2014) [30] shows the strain GSS03T was placed in a cluster within the genus Bacillus based on the 16S rRNA gene sequences (1460 bp).”
BackgroundInfluentialdos Santos, S. C., Rossi-Alva, J. C., & Roque, M. R. D. A. (2010) · AFRICAN JOURNAL OF BIOTECHNOLOGY · doi:10.5897/ajb10.201 · Cited by 19
Tarntip, R. (2011) · African Journal of Microbiology Research · doi:10.5897/ajmr11.824 · Cited by 18 · cited 1×
“According to Tarntip & Sirichom (2011) [27], Bacillus and Lysinibacillus are ubiquitous and varied either in soil or the environment.”
BackgroundBacillus kyonggiensis sp. nov., isolated from soil of a lettuce field
Dong, K., & Lee, S. (2011) · The Journal of Microbiology · doi:10.1007/s12275-011-1218-7 · Cited by 9
Optimization of process conditions for extraction of biosurfactant
Jamal, P., Alam, M. Z., Yusof, U. S. M., & Nawawi, W. M. F. W. (2011) · The International Islamic University Malaysia Repository (The International Islamic University Malaysia) · Cited by 4
Research works printed but not linked: 2
- Pandey, 2013, Optimization and characterization of biosurfactant producing microbes isolated from oil contaminated soil and expression of biosurfactant genes in E.coli, Int. J. Pharm. Res. Bio-Sci., 2, 46
- Mohammed, A.S., Kapri, A., and Goel, R. (2011). Use of Biosurfactants in the Removal of Heavy Metal Ions from Soils, Springer.
Cited by
Peng, X., Jiang, Y., Chen, Z., Osman, A. I., Farghali, M., Rooney, D. W., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01551-5 · Cited by 333
Biosurfactant is a powerful tool for the bioremediation of heavy metals from contaminated soils
Mishra, S., Lin, Z., Pang, S., Zhang, Y., Bhatt, P., & Chen, S. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126253 · Cited by 246
Sarker, A., Masud, M. A. A., Deepo, D. M., Das, K., Nandi, R., Ansary, M. W. R., Islam, A. R. M. T., & Islam, T. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138861 · Cited by 197
Gaur, V. K., Sharma, P., Sirohi, R., Varjani, S., Taherzadeh, M. J., Chang, J.-S., Yong Ng, H., Wong, J. W. C., & Kim, S.-H. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2021.126059 · Cited by 186
Ambaye, T. G., Vaccari, M., Prasad, S., & Rtimi, S. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.102090 · Cited by 158
Metadata
- Authors
- Md Badrul Hisham, N. H., Ibrahim, M. F., Ramli, N., & Abd-Aziz, S.
- Affiliations
- Department of Bioprocess Technology, Faculty of Biotechnology and Biomolecular Sciences, Universiti Putra Malaysia, 43400 UPM Serdang, Malaysia
- Universiti Putra Malaysia (MY)
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2019-07-18
- Volume
- 24
- Issue
- 14
- Pages
- 2617
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC6681096
- OpenAlex
- W2958061494
- Cited by
- 129
- References
- 62
- Citations by year
- 2026: 13 · 2025: 13 · 2024: 26 · 2023: 19 · 2022: 25 · 2021: 26 · 2020: 7
- FWCI
- 4.34
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) (acceptedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry of Higher Education, Malaysia (FRGS 2014-2)
- Topics
- Physical Sciences › Environmental Science › Pollution › Microbial bioremediation and biosurfactants
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surfactants and Colloidal Systems
- Physical Sciences › Environmental Science › Environmental Chemistry › Environmental Chemistry and Analysis
- Keywords
- biosurfactant production, waste cooking oil, heavy metal removal, lipopeptide biosurfactant, surfactin, copper, lead, zinc, chromium, cadmium, bioremediation, water pollution, surface tension, chloroform-methanol extraction, industrial wastewater
- MeSH terms
- Adsorption, Bacillus, Bacterial Proteins, Biodegradation, Environmental, Dietary Fats, Unsaturated, Phylogeny, Surface-Active Agents, Metals, Heavy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.