CoChat

Antimicrobial Efficiency of Chitosan and Its Methylated Derivative against Lentilactobacillus parabuchneri Biofilms

Open access

The DOI matches its Crossref record; 108 of the 109 references it cites were found in a registry or an index; none of the 69 sources its claims cite is checked for support yet.

Abstract

Antimicrobial materials are considered potential alternatives to prevent the development of biofilm-associated contaminations. Concerns regarding synthetic preservatives necessitate the development of innovative and safe natural antimicrobials. In the present study, we discuss the in situ infrared attenuated total reflection spectroscopy (IR-ATR) investigations of the selective antimicrobial efficiency of chitosan in controlling the growth of Lentilactobacillus parabuchneri biofilms. The protonated charges of chitosan were additionally amplified by structural modification via methylation, yielding quaternized derivative TMC (i.e., N, N, N-trimethyl chitosan). To evaluate antimicrobial effectiveness against L. parab. biofilms, IR-ATR spectroscopy provided information on molecular mechanisms and insights into chemical changes during real-time biofilm inhibition studies. The integrated fiberoptic oxygen microsensors enabled monitoring oxygen (O2) concentration gradients within biofilms, thereby confirming the metabolic oxygen depletion dropping from 4.5 to 0.7 mg L−1. IR studies revealed strong electrostatic interactions between chitosan/its water-soluble derivative and bacteria, indicating that a few hours were sufficient to affect biofilm disruption. The significant decrease in the IR bands is related to the characteristic spectral information of amide I, II, III, nucleic acid, and extracellular polymeric matrix (EPS) produced by L. parabuchneri biofilms. Cell clusters of biofilms, microcolonies, and destabilization of the EPS matrix after the addition of biopolymers were visualized using optical microscopy. In addition, scanning electron microscopy (SEM) of biofilms grown on polystyrene and stainless-steel surfaces was used to examine morphological changes, indicating the disintegration of the biofilm matrix into individual cells. Quantification of the total biofilm formation correlated with the CV assay results, indicating cell death and lysis. The electrostatic interactions between chitosan and the bacterial cell wall typically occur between protonated amino groups and negatively charged phospholipids, which promote permeabilization. Biofilm growth inhibition was assessed by a viability assay for a period of 72 h and in the range of low MIC values (varying 0.01–2%). These results support the potential of chitosan and TMC for bacterial growth prevention of the foodborne contaminant L. parabuchneri in the dairy industry and for further implementation in food packaging.

Overview

CoChat Summary

TL;DR

Chitosan and its methylated derivative TMC inhibited *Lentilactobacillus parabuchneri* DSM 5987 biofilms, as monitored in real time by IR-ATR spectroscopy, oxygen sensing, microscopy, and viability assays. Chitosan and TMC reduced biofilm-associated IR signals and EPS, with chitosan showing 50.1% and TMC 45.7% biofilm inhibition in the crystal violet assay.

Key findings

  • IR-ATR showed decreases in amide I/II/III, nucleic acid, lactate, and EPS bands after addition of 2% chitosan or TMC; chitosan effects appeared within 1.5 h, and TMC produced a significant decrease after only 2 h. Oxygen concentration dropped from 4.5 to 0.7 mg L−1 during biofilm formation/inhibition, and pH decreased from 5.8 before chitosan incorporation to 5.0 after biofilm inhibition.
  • In the 72 h crystal violet assay, control biofilm OD600 was 2.93 ± 0.5; chitosan gave OD600 1.46 ± 0.5 and 50.1% ± 0.7 biofilm inhibition, while TMC gave OD600 1.59 ± 0.1 and 45.7% ± 0.5 inhibition. Biofilm formation on microtiter plates was OD600 2.38 ± 0.2 after 48 h and OD600 2.93 ± 0.5 after 72 h.
  • Commercial chitosan had a deacetylation degree of 78.86%. MIC values tested included 0.01%, 0.05%, 0.06%, 0.1%, 0.5%, and 1% from a 2% stock (abstract describes a 0.01–2% range); chitosan inhibition appeared concentration-independent, TMC was not concentration-dependent, and the highest inhibition was observed after 72 h for 0.5% chitosan, with TMC similar at 0.1–0.5%.
  • Optical microscopy and SEM showed biofilm matrix disintegration into individual cells and microcolonies on glass coverslips and stainless-steel surfaces after 0.05% chitosan or TMC. PCA separated chitosan-inhibited datasets at 93.3% and TMC datasets at 69.56%.

Methods

  • *Lentilactobacillus parabuchneri* DSM 5987 (DSMZ) was cultivated in MRS broth at 30 °C under microaerophilic conditions. Biofilms were grown in a custom IR-ATR flow cell with a ZnSe crystal at 0.78 mL/min; chitosan or TMC was added after 24 h of biofilm formation, and IR monitoring continued up to 168 h.
  • Chitosan (medium molecular weight, 75–85% deacetylation degree stated for material; measured DD 78.86%) and synthesized N,N,N-trimethyl chitosan (TMC) were tested at concentrations from 0.01% to 2% (w/v). Oxygen was measured with PtTFPP sensor spots and a Firesting fiberoptic oxygen meter; pH was measured with a calibrated Metrohm pH meter.
  • Biofilm assays included crystal violet staining in 96-well polystyrene microtiter plates at 20–72 h, optical microscopy on glass coverslips with Congo red staining, SEM on stainless-steel coupons after 24, 48, and 72 h, and PCA of IR-ATR spectral datasets.

Limitations

  • Stated in the paper: the authors note that future observations with varying concentrations of chitosan and TMC are needed to elucidate reversible versus irreversible adhesion processes, and that TMC-related variability in biofilm biomass was not clearly addressed in the PCA model. The paper also states that the influence of chitosan and TMC on molecular mechanistic changes and biofilm formation by IR-ATR spectroscopy “has not been elaborated.”
  • Evident from the text: the study uses a single *L. parabuchneri* strain (DSM 5987) and laboratory MRS media with model surfaces (ZnSe, polystyrene, glass, stainless steel), without testing real dairy or food matrices; translation to dairy-industry packaging or contamination scenarios is therefore not directly demonstrated.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/molecules27248647

Cites

108 of 109 references verified1 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Transmission IR spectra (using the KBr pellet technique) of chitin (black spectrum), commercial chitosan (red spectrum), and deacetylated chitosan (blue spectrum) to determine the influence of DD on the efficiency of chitosan against bacterial biofilms.
Figure 1 Transmission IR spectra (using the KBr pellet technique) of chitin (black spectrum), commercial chitosan (red spectrum), and deacetylated chitosan (blue spectrum) to determine the influence of DD on the efficiency of chitosan against bacterial biofilms.CC BY · PubMed Central
Figure 2 IR-ATR spectra of L. parab. biofilms with a 2% stock solution of chitosan in 1% acetic acid solution and MRS medium. The IR spectra were baseline-corrected.
Figure 2 IR-ATR spectra of L. parab. biofilms with a 2% stock solution of chitosan in 1% acetic acid solution and MRS medium. The IR spectra were baseline-corrected.CC BY · PubMed Central
Figure 3 (a) Three-dimensional plot of IR-ATR spectra during three days of monitoring of temporal biofilm inhibition, (b) growth profile of L. parabuchneri DSMZ 5987 as assayed by turbidimetry at 620 nm compared to chitosan and TMC in 2 g/L concentration added to the MRS medium during a 24 h interaction with bacteria, and (c) inhibition histogram of chitosan and TMC derivative as a function of different polymer concentrations added to MRS media for 16 h of antimicrobial-biofilm interactions. The error bars represent the standard deviation of three independent experiments.
Figure 3 (a) Three-dimensional plot of IR-ATR spectra during three days of monitoring of temporal biofilm inhibition, (b) growth profile of L. parabuchneri DSMZ 5987 as assayed by turbidimetry at 620 nm compared to chitosan and TMC in 2 g/L concentration added to the MRS medium during a 24 h interaction with bacteria, and (c) inhibition histogram of chitosan and TMC derivative as a function of different polymer concentrations added to MRS media for 16 h of antimicrobial-biofilm interactions. The error bars represent the standard deviation of three independent experiments.CC BY · PubMed Central
Figure 4 (a) IR-ATR spectrum of L. parabuchneri biofilm disruption after the insertion of TMC; (b) integrated peak values (IPVs) as a function of time for the spectral window 1700–900 cm−1.
Figure 4 (a) IR-ATR spectrum of L. parabuchneri biofilm disruption after the insertion of TMC; (b) integrated peak values (IPVs) as a function of time for the spectral window 1700–900 cm−1.CC BY · PubMed Central
Figure 5 Concentration profiles for oxygen during bacterial detachment at the ATR waveguide surface at a constant flow of chitosan and TMC inhibition were determined via an oxygen optical sensor spot attached to the ATR waveguide surface. The results shown are the averages of three replicative oxygen concentration measurements.
Figure 5 Concentration profiles for oxygen during bacterial detachment at the ATR waveguide surface at a constant flow of chitosan and TMC inhibition were determined via an oxygen optical sensor spot attached to the ATR waveguide surface. The results shown are the averages of three replicative oxygen concentration measurements.CC BY · PubMed Central
Figure 6 Calculated values between 1150–950 cm−1 for the band of polysaccharides (1038 cm−1, black, left), polysaccharides (1108.3 cm−1, blue, left), phosphodiesters (1079.8 cm−1, red, left), and phosphoryl group (993.0 cm−1, green, left), from the cumulative impulse fit of the IR spectra monitored after 168 h of L. parabuchneri incubation in MRS media and after 2.5 h and 6 h of (a) chitosan and (b) TMC insertion.
Figure 6 Calculated values between 1150–950 cm−1 for the band of polysaccharides (1038 cm−1, black, left), polysaccharides (1108.3 cm−1, blue, left), phosphodiesters (1079.8 cm−1, red, left), and phosphoryl group (993.0 cm−1, green, left), from the cumulative impulse fit of the IR spectra monitored after 168 h of L. parabuchneri incubation in MRS media and after 2.5 h and 6 h of (a) chitosan and (b) TMC insertion.CC BY · PubMed Central
Figure 7 Multivariate data strategy for identification of the natural antibacterial performance of chitosan and its methylated derivative against Lentilactobacillus parabuchneri biofilms. (a) score plot of two PCAs of control biofilms treated with 0.05% and 0.1% chitosan, (b) PCA1-PCA2 plot of biofilm inhibition by 0.05% and 0.1% trimethyl chitosan (TMC), and (c) discriminant model based on principal component scores of real-time monitoring of reduced biofilms resulting from treatment with chitosan and TMC.
Figure 7 Multivariate data strategy for identification of the natural antibacterial performance of chitosan and its methylated derivative against Lentilactobacillus parabuchneri biofilms. (a) score plot of two PCAs of control biofilms treated with 0.05% and 0.1% chitosan, (b) PCA1-PCA2 plot of biofilm inhibition by 0.05% and 0.1% trimethyl chitosan (TMC), and (c) discriminant model based on principal component scores of real-time monitoring of reduced biofilms resulting from treatment with chitosan and TMC.CC BY · PubMed Central
Figure 8 Optical micrograms of L. parabuchneri Gram staining. Congo Red-stained L. parabuchneri biofilms were grown for 10 days on glass coverslips and inhibited by the addition of a 0.05% chitosan stock solution.
Figure 8 Optical micrograms of L. parabuchneri Gram staining. Congo Red-stained L. parabuchneri biofilms were grown for 10 days on glass coverslips and inhibited by the addition of a 0.05% chitosan stock solution.CC BY · PubMed Central
Figure 9 SEM micrographs of L. parabuchneri biofilm inhibition by chitosan and TMC; (a) after 48 h of incubation, (b) after 24 h of incubation, (c) after chitosan addition and (d) after TMC addition.
Figure 9 SEM micrographs of L. parabuchneri biofilm inhibition by chitosan and TMC; (a) after 48 h of incubation, (b) after 24 h of incubation, (c) after chitosan addition and (d) after TMC addition.CC BY · PubMed Central
Figure 10 Overview of biofilm inhibition and quantification by crystal violet staining of polystyrene microtiter plates after 24, 48, and 72 h. The data represent the average of three biological replicates of the biofilm formation CV assay.
Figure 10 Overview of biofilm inhibition and quantification by crystal violet staining of polystyrene microtiter plates after 24, 48, and 72 h. The data represent the average of three biological replicates of the biofilm formation CV assay.CC BY · PubMed Central
Figure 11 A schematic representation of the synthesis steps for the methylation process of the quaternization of the amino groups of chitosan resulted in N,N,N-trimethyl chitosan (TMC).
Figure 11 A schematic representation of the synthesis steps for the methylation process of the quaternization of the amino groups of chitosan resulted in N,N,N-trimethyl chitosan (TMC).CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 0 Not valid · 44 Not checked · 100 Own results and interpretations

71 more claims

Create a free account to see all 144 claims and to verify the 69 references still open.

See all claims — free account
  • Probably not a substantial claim. 39
  • It may state two separate claims as one. 37

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

4 of 4

Citations

Cites

Show all 109 references

Research works printed but not linked: 1

  1. Agarwal M. Nagar D.P. Srivastava N. Agarwal M.K. Chitosan Nanoparticles Based Drug Delivery: An Update Int. J. Adv. Multidiscip. Res. 2015 2 1 13

Cited by

Metadata

Authors
Bajrami, D., Fischer, S., Barth, H., Hossain, S. I., Cioffi, N., & Mizaikoff, B.
Affiliations
  • Universität Ulm (DE)
  • Consorzio Interuniversitario per lo Sviluppo dei Sistemi a Grande Interfase (IT)
Corresponding author
Mizaikoff, Boris
Venue
Molecules
Publisher
MDPI AG
Published
2022-12-07
Volume
27
Issue
24
Pages
8647
ISSN
1420-3049 (ISSN-L)
OpenAlex
W4311723564
Cited by
20
References
108
Citations by year
2026: 4 · 2025: 3 · 2024: 9 · 2023: 4
FWCI
0.87
Type
journal article
Language
en
Open access
Locations
  • Molecules (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • CINECA IRIS Institutional Research Information System (University of Bari Aldo Moro) (submittedVersion)
Funders
  • European Union’s Horizon 2020 research and innovation program (H2020-MSCA-ITN-2018, 813439)
  • Marie Skłodowska-Curie (H2020-MSCA-ITN-2018, 813439)
Topics
  • Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
  • Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
Keywords
chitosan, N,N,N-trimethyl chitosan, Lentilactobacillus parabuchneri, biofilm inhibition, antimicrobial activity, electrostatic interactions, extracellular polymeric substances, oxygen depletion, foodborne pathogens, dairy industry, food packaging, natural antimicrobials
MeSH terms
Extracellular Polymeric Substance Matrix, Anti-Infective Agents, Anti-Bacterial Agents, Biofilms, Chitosan

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-22, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-22 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.