CoChat

Eco-Friendly Sustainable Fluorescent Carbon Dots for the Adsorption of Heavy Metal Ions in Aqueous Environment

Open access
Yahaya Pudza, Musa, Zainal Abidin, Zurina, Abdul Rashid, Suraya, Md Yasin, Faizah, Noor, A. S. M., Issa, Mohammed A. · 2020 · Nanomaterials

The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.

Abstract

The materials and substances required for sustainable water treatment by adsorption technique, are still being researched widely by distinguished classes of researchers. Thus, the need to synthesize substances that can effectively clean up pollutants from the environment cannot be overemphasized. So far, materials in bulk forms that are rich in carbon, such as biochar and varieties of activated carbon have been used for various adsorptive purposes. The use of bulk materials for such purposes are not efficient due to minimal surface areas available for adsorption. This study explores the adsorption task at nano dimension using carbon dots (CDs) from tapioca. The properties of carbon structure and its influence on the adsorptive efficacy of carbon nanoparticles were investigated by energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), high resolution transmission electron microscopy (HrTEM), and atomic force microscopy (AFM). The results implied carbon present in CDs are good adsorbents for effective adsorption of heavy metal ions (lead) with removal efficiency of 80.6% in aqueous environment. The adsorption process as explored by both Langmuir and Freundlich isotherms have proven favorability of the adsorption process. Langmuir form two and three have correlation coefficients R2 at 0.9922 and 0.9912, respectively. The Freundlich isotherm confirms CDs as having defined surface heterogeneity and the exponential distribution of active sites. The adsorption of lead unto CDs obeyed the second order kinetic model with coefficient of determination, R2 of 0.9668 and 0.9996 at an initial lead concentration of 20 mg/L and 100 mg/L, respectively. The findings validated the efficiency of CDs derived from tapioca as an excellent material for further utilization in the environmental fields of wastewater pollution detection and clean up, bio-imaging, and chemical sensing applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/nano10020315

Cites

71 of 71 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Carbon dots synthesis mechanism.
Figure 1 Carbon dots synthesis mechanism.CC BY · PubMed Central
Figure 2 (A) atomic force microscopy (AFM) 2D image of carbon dots (CDs) (B) AFM 3D morphology of CDs (C) high resolution transmission electron microscopic (HrTEM) image of CDs.
Figure 2 (A) atomic force microscopy (AFM) 2D image of carbon dots (CDs) (B) AFM 3D morphology of CDs (C) high resolution transmission electron microscopic (HrTEM) image of CDs.CC BY · PubMed Central
Figure 3 Energy-dispersive spectroscopy (EDS) Spectra of carbon dots at point 1 and 2.
Figure 3 Energy-dispersive spectroscopy (EDS) Spectra of carbon dots at point 1 and 2.CC BY · PubMed Central
Figure 4 (A,B) Wide and narrow scan for tapioca (precursor) and synthesized carbon dots.
Figure 4 (A,B) Wide and narrow scan for tapioca (precursor) and synthesized carbon dots.CC BY · PubMed Central
Figure 5 Fourier-transform infrared spectroscopy (FT-IR) spectrum of CDs and tapioca.
Figure 5 Fourier-transform infrared spectroscopy (FT-IR) spectrum of CDs and tapioca.CC BY · PubMed Central
Figure 6 Optical properties of CDs by UV-visible absorption and emission spectra.
Figure 6 Optical properties of CDs by UV-visible absorption and emission spectra.CC BY · PubMed Central
Figure 7 Effect of contact time on the removal efficiency of lead ions by CDs.
Figure 7 Effect of contact time on the removal efficiency of lead ions by CDs.CC BY · PubMed Central
Figure 8 (A) initial concentration of lead ions and removal efficiency of CDs and (B) relationship between lead removal and pH.
Figure 8 (A) initial concentration of lead ions and removal efficiency of CDs and (B) relationship between lead removal and pH.CC BY · PubMed Central
Figure 9 Equilibrium adsorption and the three forms of Langmuir isotherm for lead adsorption into CDs.
Figure 9 Equilibrium adsorption and the three forms of Langmuir isotherm for lead adsorption into CDs.CC BY · PubMed Central
Figure 10 Freundlich Isotherm for CDs.
Figure 10 Freundlich Isotherm for CDs.CC BY · PubMed Central
Figure 11 Initial Concentration of lead ions for first and second order kinetics.
Figure 11 Initial Concentration of lead ions for first and second order kinetics.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 71 references

Cited by

See all 222

Metadata

Authors
Yahaya Pudza, M., Zainal Abidin, Z., Abdul Rashid, S., Md Yasin, F., Noor, A. S. M., & Issa, M. A.
Affiliations
  • Department of Chemical and Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia
  • Universiti Putra Malaysia (MY)
Venue
Nanomaterials
Publisher
MDPI AG
Published
2020-02-12
Volume
10
Issue
2
Pages
315
ISSN
2079-4991 (ISSN-L)
OpenAlex
W3006673067
Cited by
218
References
71
Citations by year
2026: 24 · 2025: 45 · 2024: 46 · 2023: 40 · 2022: 34 · 2021: 19 · 2020: 9
FWCI
7.82
Type
journal article
Language
en
Open access
Locations
  • Nanomaterials (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Universiti Putra Malaysia (UPM) (GP-IPS/2017/9556800)
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Materials Science › Materials Chemistry › Carbon and Quantum Dots Applications
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
Keywords
carbon dots, heavy metal adsorption, lead removal, wastewater treatment, Langmuir isotherm, Freundlich isotherm, second-order kinetics, eco-friendly adsorbents, fluorescent carbon nanoparticles, biochar

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Eco-Friendly Sustainable Fluorescent Carbon Dots for the Adsorption of Heavy Metal Ions in Aqueous Environment. https://app.cochat.ai/papers/10.3390/nano10020315
The paper
Yahaya Pudza, M., Zainal Abidin, Z., Abdul Rashid, S., Md Yasin, F., Noor, A. S. M., & Issa, M. A. (2020). Eco-Friendly Sustainable Fluorescent Carbon Dots for the Adsorption of Heavy Metal Ions in Aqueous Environment. Nanomaterials. https://doi.org/10.3390/nano10020315

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.