The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Recent Advances in Synthesis and Applications of MFe2O4 (M = Co, Cu, Mn, Ni, Zn) Nanoparticles
Open accessAbstract
In the last decade, research on the synthesis and characterization of nanosized ferrites has highly increased and a wide range of new applications for these materials have been identified. The ability to tailor the structure, chemical, optical, magnetic, and electrical properties of ferrites by selecting the synthesis parameters further enhanced their widespread use. The paper reviews the synthesis methods and applications of MFe2O4 (M = Co, Cu, Mn, Ni, Zn) nanoparticles, with emphasis on the advantages and disadvantages of each synthesis route and main applications. Along with the conventional methods like sol-gel, thermal decomposition, combustion, co-precipitation, hydrothermal, and solid-state synthesis, several unconventional methods, like sonochemical, microwave assisted combustion, spray pyrolysis, spray drying, laser pyrolysis, microemulsion, reverse micelle, and biosynthesis, are also presented. MFe2O4 (M = Co, Cu, Mn, Ni, Zn) nanosized ferrites present good magnetic (high coercivity, high anisotropy, high Curie temperature, moderate saturation magnetization), electrical (high electrical resistance, low eddy current losses), mechanical (significant mechanical hardness), and chemical (chemical stability, rich redox chemistry) properties that make them suitable for potential applications in the field of magnetic and dielectric materials, photoluminescence, catalysis, photocatalysis, water decontamination, pigments, corrosion protection, sensors, antimicrobial agents, and biomedicine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Selima, S. S., Khairy, M., & Mousa, M. A. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.12.146 · Cited by 74
RetractedReview on nanoparticles and nanostructured materials: history, sources, toxicity and regulations
Jeevanandam, J., Barhoum, A., Chan, Y. S., Dufresne, A., & Danquah, M. K. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.98 · Cited by 3,297
Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review
Farahani, H., Wagiran, R., & Hamidon, M. (2014) · Sensors · doi:10.3390/s140507881 · Cited by 1,286
Magnetic Nanoparticles: Surface Effects and Properties Related to Biomedicine Applications
Issa, B., Obaidat, I., Albiss, B., & Haik, Y. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms141121266 · Cited by 1,245
Synthesis and photocatalytic activity of ferrites under visible light: A review
Casbeer, E., Sharma, V. K., & Li, X.-Z. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.11.034 · Cited by 837
Ferrite nanoparticles: Synthesis, characterisation and applications in electronic device
Kefeni, K. K., Msagati, T. A. M., & Mamba, B. B. (2017) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2016.11.002 · Cited by 645
Houshiar, M., Zebhi, F., Razi, Z. J., Alidoust, A., & Askari, Z. (2014) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2014.06.059 · Cited by 509
A review on MnZn ferrites: Synthesis, characterization and applications
Thakur, P., Chahar, D., Taneja, S., Bhalla, N., & Thakur, A. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.03.287 · Cited by 451
Kefeni, K. K., & Mamba, B. B. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2019.e00140 · Cited by 405
Mini-review: Ferrite nanoparticles in the catalysis
Kharisov, B. I., Dias, H. V. R., & Kharissova, O. V. (2019) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2014.10.049 · Cited by 378
Handbook of Sol-Gel Science and Technology
(2016) · Springer eBooks · doi:10.1007/978-3-319-19454-7 · Cited by 371
Magnetic Iron Oxide Nanoparticle (IONP) Synthesis to Applications: Present and Future
Ajinkya, N., Yu, X., Kaithal, P., Luo, H., Somani, P., & Ramakrishna, S. (2020) · Materials · doi:10.3390/ma13204644 · Cited by 362
Ortiz-Quiñonez, J.-L., Pal, U., & Villanueva, M. S. (2018) · ACS Omega · doi:10.1021/acsomega.8b02229 · Cited by 358
Ashour, A. H., El-Batal, A. I., Maksoud, M. I. A. A., El-Sayyad, G. S., Labib, S., Abdeltwab, E., & El-Okr, M. M. (2018) · Particuology · doi:10.1016/j.partic.2017.12.001 · Cited by 318
Masunga, N., Mmelesi, O. K., Kefeni, K. K., & Mamba, B. B. (2019) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2019.103179 · Cited by 284
Synthesis and characterization of NiFe2O4 nanoparticles and nanorods
Sivakumar, P., Ramesh, R., Ramanand, A., Ponnusamy, S., & Muthamizhchelvan, C. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.02.077 · Cited by 243
Synthesis and characterization of manganese ferrite nanoparticles by thermal treatment method
Goodarz Naseri, M., Saion, E. B., Ahangar, H. A., Hashim, M., & Shaari, A. H. (2011) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2011.01.016 · Cited by 241
Colour performance of ceramic nano-pigments
Cavalcante, P. M. T., Dondi, M., Guarini, G., Raimondo, M., & Baldi, G. (2008) · Dyes and Pigments · doi:10.1016/j.dyepig.2008.07.004 · Cited by 234
Finite size and surface effects on the magnetic properties of cobalt ferrite nanoparticles
Vázquez-Vázquez, C., López-Quintela, M. A., Buján-Núñez, M. C., & Rivas, J. (2011) · Journal of Nanoparticle Research · doi:10.1007/s11051-010-9920-7 · Cited by 232
Morrison, S. A., Cahill, C. L., Carpenter, E. E., Calvin, S., Swaminathan, R., McHenry, M. E., & Harris, V. G. (2004) · Journal of Applied Physics · doi:10.1063/1.1715132 · Cited by 211
Raut, A. V., Barkule, R. S., Shengule, D. R., & Jadhav, K. M. (2014) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2014.01.039 · Cited by 207
Mohamed, R. M., Rashad, M. M., Haraz, F. A., et al. (2010) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2010.01.034 · Cited by 206
Ahmadian-Fard-Fini, S., Ghanbari, D., & Salavati-Niasari, M. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.12.131 · Cited by 201
2D Nanostructures of CoFe2O4 and NiFe2O4: Efficient Oxygen Evolution Catalyst
Mahala, C., Sharma, M. D., & Basu, M. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.04.079 · Cited by 173
Senapati, K. K., Borgohain, C., & Phukan, P. (2011) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2011.02.007 · Cited by 165
Kim, H. S., Kim, D., Kwak, B. S., Han, G. B., Um, M., & Kang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.12.046 · Cited by 163
On the structural, magnetic and electrical properties of sol–gel derived nanosized cobalt ferrite
Gopalan, E. V., Joy, P. A., Al‐Omari, I. A., Kumar, D. S., Yoshida, Y., & Anantharaman, M. R. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.06.033 · Cited by 157
Majid, F., Rauf, J., Ata, S., Bibi, I., Malik, A., Ibrahim, S. M., Ali, A., & Iqbal, M. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2020.123888 · Cited by 155
Vinosha, P. A., Manikandan, A., Preetha, A. C., Dinesh, A., Slimani, Y., Almessiere, M. A., BAYKAL, A., Xavier, B., & Nirmala, G. F. (2021) · Journal of Superconductivity and Novel Magnetism · doi:10.1007/s10948-021-05854-6 · Cited by 153
Mahmoodi, N. M. (2011) · Desalination · doi:10.1016/j.desal.2011.06.027 · Cited by 152
Chakradhary, V. K., Ansari, A., & Akhtar, M. J. (2018) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2018.09.021 · Cited by 151
Vinosha, P. A., Manikandan, A., Ceicilia, A. S. J., Dinesh, A., Nirmala, G. F., Preetha, A. C., Slimani, Y., Almessiere, M. A., BAYKAL, A., & Xavier, B. (2021) · Ceramics International · doi:10.1016/j.ceramint.2020.12.289 · Cited by 150
Superspin glass state in MnFe2O4 nanoparticles
Aslibeiki, B., Kameli, P., Salamati, H., Eshraghi, M., & Tahmasebi, T. (2010) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2010.05.007 · Cited by 149
A comprehensive study on structure, properties, synthesis and characterization of ferrites
Vedrtnam, A., Kalauni, K., Dubey, S., Kumar, A., & Departamento de Arquitectura, E. D. A. U. D. A. (2020) · AIMS Materials Science · doi:10.3934/matersci.2020.6.800 · Cited by 146
Hyperthermia application of zinc doped nickel ferrite nanoparticles
Ghayour, H., Abdellahi, M., Ozada, N., Jabbrzare, S., & Khandan, A. (2017) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2017.08.018 · Cited by 132
Formation, Structure and Magnetic Properties of MFe2O4@SiO2 (M = Co, Mn, Zn, Ni, Cu) Nanocomposites
Dippong, T., Levei, E. A., & Cadar, O. (2021) · Materials · doi:10.3390/ma14051139 · Cited by 116
Self-citationSize and crystallinity-dependent magnetic properties of CoFe2O4 nanocrystals
Chia, C. H., Zakaria, S., Yusoff, M., et al. (2009) · Ceramics International · doi:10.1016/j.ceramint.2009.10.001 · Cited by 111
Anupama, M. K., Rudraswamy, B., & Dhananjaya, N. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.02.241 · Cited by 111
Low temperature combustion synthesis and magnetostructural properties of Co–Mn nanoferrites
Salunkhe, A. B., Khot, V. M., Phadatare, M., Thorat, N. D., Joshi, R. S., Yadav, H. M., & Pawar, S. H. (2013) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2013.09.020 · Cited by 108
Chaibakhsh, N., & Moradi–Shoeili, Z. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.02.086 · Cited by 105
Kumar, M., Dosanjh, H. S., Sonika, S., Singh, J., Monir, K., & Singh, H. (2019) · Environmental Science Water Research & Technology · doi:10.1039/c9ew00858f · Cited by 103
Shojaeı, A. F., Tabatabaeian, K., Shakeri, S., & Karimi, F. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.02.082 · Cited by 97
Abbas, M., Rao, B. P., Islam, M. N., Kim, K. W., Naga, S. M., Takahashi, M., & Kim, C. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.09.109 · Cited by 92
Preparation and antibacterial activity of CoFe2O4/SiO2/Ag composite impregnated with streptomycin
Kooti, M., Gharineh, S., Mehrkhah, M., Shaker, A., & Motamedi, H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.07.139 · Cited by 89
Oh, Y., Santhamoorthy, M., Manivasagan, P., Bharathiraja, S., & Oh, J. (2016) · Biochimie · doi:10.1016/j.biochi.2016.11.012 · Cited by 86
A study of the influence of crystallite size on the electrical and magnetic properties of CuFe2O4
Iqbal, J., Yaqub, N., Sepioł, B., & Ismail, B. (2011) · Materials Research Bulletin · doi:10.1016/j.materresbull.2011.07.036 · Cited by 85
Preparation and characterization of the cobalt ferrite nano-particles by reverse coprecipitation
Huixia, F., Baiyi, C., Deyi, Z., Jianqiang, Z., & Lin, T. (2013) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2013.12.033 · Cited by 85
Kerroum, M. A. A., Essyed, A., Iacoviță, C., Baaziz, W., Ihiawakrim, D., Mounkachi, O., Hamedoun, M., Benyoussef, A., Benaı̈ssa, M., & Ersen, O. (2019) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2019.01.081 · Cited by 85
Dar, M. A., & Varshney, D. (2017) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2017.04.046 · Cited by 80
Tomar, D., & Jeevanandam, P. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155815 · Cited by 80
Effect of surfactants on the optical and magnetic properties of cobalt-zinc ferrite Co0.5Zn0.5Fe2O4
Foulani, A.-H. E., Aamouche, A., Mohseni, F., Amaral, J. S., Tobaldi, D. M., & Pullar, R. C. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.393 · Cited by 68
Suleman, M., & Riaz, S. (2019) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2019.166143 · Cited by 68
Zahraei, M., Monshi, A., Morales, M. P., Shahbazi‐Gahrouei, D., Amirnasr, M., & Behdadfar, B. (2015) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2015.06.006 · Cited by 62
Rao, K. S., Nayakulu, S. V. R., Varma, M. C., Choudary, G. S. V. R. K., & Rao, K. H. (2017) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2017.11.069 · Cited by 61
Immobilization of glucose oxidase using CoFe2O4/SiO2 nanoparticles as carrier
Wang, H., Huang, J., Wang, C., Li, D., Ding, L., & Han, Y. H. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.01.088 · Cited by 58
Amirabadizadeh, A., Salighe, Z., Sarhaddi, R., & Lotfollahi, Z. (2017) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2017.03.023 · Cited by 58
Laser-driven nanomaterials and laser-enabled nanofabrication for industrial applications
Wang, S., & Gao, L. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815749-7.00007-4 · Cited by 55
Egizbek, K. B., Kozlovskiy, A. L., Łudzik, K., Zdorovets, M. V., Korolkov, I. V., Marciniak, B., Jażdżewska, M., Chudoba, D. M., Nazarova, A., & Kontek, R. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.03.222 · Cited by 54
Specifying the ferrofluid parameters important from the viewpoint of magnetic fluid hyperthermia
Gas, P., & Miaskowski, A. (2015) · Selected Issues of Electrical Engineering and Electronics (WZEE) · doi:10.1109/wzee.2015.7394040 · Cited by 51
Naik, A. B., Naik, P. P., Hasolkar, S. S., & Naik, D. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.05.177 · Cited by 50
Popkov, V. I., Tolstoy, V. P., & Semenov, V. G. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152179 · Cited by 45
Enhanced strain sensitivity in magnetostrictive spinel ferrite Co1−xZnxFe2O4
Bhame, S. D., & Joy, P. A. (2017) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2017.09.075 · Cited by 40
Gorgizadeh, M., Behzadpour, N., Salehi, F., Daneshvar, F., Vais, R., Nazari-Vanani, R., Azarpira, N., Lotfi, M., & Sattarahmady, N. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152597 · Cited by 32
Experimental Evolution of Magnetite Nanoparticle Resistance in Escherichia coli
Ewunkem, A. J., Rodgers, L., Campbell, D., Staley, C., Subedi, K., Boyd, S. M., & Graves, J. L. (2021) · Nanomaterials · doi:10.3390/nano11030790 · Cited by 32
Shell-dependent antimicrobial efficiency of cobalt ferrite nanoparticles
Ramanavičius, S., Žalnėravičius, R., Niaura, G., Drabavičius, A., & Jagminas, A. (2018) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2018.03.007 · Cited by 30
Bakhshi, H., Vahdati, N., Sedghi, A., & Mozharivskyj, Y. (2018) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2018.10.146 · Cited by 18
Influences of Co compositions in CoFe2O4 on microstructures, thermal, and magnetic properties
Sinuhaji, P., Simbolon, T. R., Hamid, M., et al. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101040 · Cited by 17
High speed processing of NiFe2O4 spinel using a laser furnace
Özçelik, B., Özçelik, S., Amaveda, H., Santos, H., Borrell, C. J., Sáez-Puche, R., de la Fuente, G. F., & Angurel, L. A. (2020) · Journal of Materiomics · doi:10.1016/j.jmat.2020.05.003 · Cited by 16
Cited by
Review on magnetic spinel ferrite (MFe2O4) nanoparticles: From synthesis to application
Salih, S. J., & Mahmood, W. M. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e16601 · Cited by 670
Metadata
- Authors
- Dippong, T., Levei, E. A., & Cadar, O.
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2021-06-13
- Volume
- 11
- Issue
- 6
- Pages
- 1560
- ISSN
- 2079-4991 (ISSN-L)
- OpenAlex
- W3169641108
- Cited by
- 418
- References
- 68
- FWCI
- 16.56
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.