Synthesis of Multi-Walled Carbon Nanotubes from Plastic Waste Using a Stainless-Steel CVD Reactor as Catalyst
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The disposal of non-biodegradable plastic waste without further upgrading/downgrading is not environmentally acceptable and many methods to overcome the problem have been proposed. Herein we indicate a simple method to make high-value nanomaterials from plastic waste as a partial solution to the environmental problem. Laboratory-based waste centrifuge tubes made of polypropylene were chosen as a carbon source to show the process principle. In the process, multi-walled carbon nanotubes (MWCNTs) were synthesized from plastic waste in a two-stage stainless steel 316 (SS 316) metal tube that acted as both reactor vessel and catalyst. The steel reactor contains Fe (and Ni, and various alloys), which act as the catalyst for the carbon conversion process. The reaction and products were studied using electron probe microanalysis, thermogravimetric analysis, Raman spectroscopy and transmission electron microscopy and scanning electron microscopy. Optimization studies to determine the effect of different parameters on the process showed that the highest yield and most graphitized MWCNTs were formed at 900 °C under the reaction conditions used (yield 42%; Raman ID/IG ratio = 0.48). The high quality and high yield of the MWCNTs that were produced in a flow reactor from plastic waste using a two stage SS 316 chemical vapor deposition (CVD) furnace did not require the use of an added catalyst.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eerkes-Medrano, D., Thompson, R. C., & Aldridge, D. C. (2015) · Water Research · doi:10.1016/j.watres.2015.02.012 · Cited by 2,638
Gregory, M. R. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0265 · Cited by 1,852
Classify plastic waste as hazardous
Rochman, C. M., Browne, M. A., Halpern, B. S., Hentschel, B. T., Hoh, E., Karapanagioti, H. K., Rios-Mendoza, L. M., Takada, H., Teh, S., & Thompson, R. C. (2013) · Nature · doi:10.1038/494169a · Cited by 1,752 · cited 1×
“have advocated classifying plastic waste as a hazardous material so that its disposal and reusability can be ensured [6].”
BackgroundSharma, P. P., Wu, J., Yadav, R. M., Liu, M., Wright, C. J., Tiwary, C. S., Yakobson, B. I., Lou, J., Ajayan, P. M., & Zhou, X. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506062 · Cited by 467
Gong, J., Liu, J., Chen, X., Jiang, Z., Wen, X., Mijowska, E., & Tang, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05118a · Cited by 198
Cited by
Upcycling plastic waste to carbon materials for electrochemical energy storage and conversion
Jiang, M., Wang, X., Xi, W., Zhou, H., Yang, P., Yao, J., Jiang, X., & Wu, D. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141962 · Cited by 112
Upcycling of Waste Plastic into Hybrid Carbon Nanomaterials
Wyss, K. M., Li, J. T., Advincula, P. A., Bets, K. V., Chen, W., Eddy, L., Silva, K. J., Beckham, J. L., Chen, J., Meng, W., et al. (2023) · Advanced Materials · doi:10.1002/adma.202209621 · Cited by 105
Structure-oriented conversions of plastics to carbon nanomaterials
Ren, S., Xu, X., Hu, K., Tian, W., Duan, X., Yi, J., & Wang, S. (2022) · Carbon Research · doi:10.1007/s44246-022-00016-2 · Cited by 98
Metadata
- Authors
- Tripathi, P., Durbach, S., & Coville, N.
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2017-09-22
- Volume
- 7
- Issue
- 10
- Pages
- 284
- ISSN
- 2079-4991 (ISSN-L)
- OpenAlex
- W2760264862
- Cited by
- 64
- References
- 5
- FWCI
- 2.26
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis of Multi-Walled Carbon Nanotubes from Plastic Waste Using a Stainless-Steel CVD Reactor as Catalyst. https://app.cochat.ai/papers/10.3390/nano7100284
- The paper
- Tripathi, P., Durbach, S., & Coville, N. (2017). Synthesis of Multi-Walled Carbon Nanotubes from Plastic Waste Using a Stainless-Steel CVD Reactor as Catalyst. Nanomaterials. https://doi.org/10.3390/nano7100284
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.