CoChat

Crystallization and Stereocomplexation of PLA-mb-PBS Multi-Block Copolymers

Open access

The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.

Abstract

The crystallization and morphology of PLA-mb-PBS copolymers and their corresponding stereocomplexes were studied. The effect of flexible blocks (i.e., polybutylene succinate, PBS) on the crystallization of the copolymers and stereocomplex formation were investigated using polarized light optical microscopy (PLOM), differential scanning calorimetry (DSC), infrared spectroscopy (FTIR), and carbon-13 nuclear magnetic resonance spectroscopy (13C-NMR). The PLA and PBS multiple blocks were miscible in the melt and in the glassy state. When the PLA-mb-PBS copolymers are cooled from the melt, the PLA component crystallizes first creating superstructures, such as spherulites or axialites, which constitute a template within which the PBS component has to crystallize when the sample is further cooled down. The Avrami theory was able to fit the overall crystallization kinetics of both semi-crystalline components, and the n values for both blocks in all the samples had a correspondence with the superstructural morphology observed by PLOM. Solution mixtures of PLLA-mb-PBS and PLDA-mb-PBS copolymers were prepared, as well as copolymer/homopolymer blends with the aim to study the stereocomplexation of PLLA and PDLA chain segments. A lower amount of stereocomplex formation was observed in copolymer mixtures as compared to neat L100/D100 stereocomplexes. The results show that PBS chain segments perturb the formation of stereocomplexes and this perturbation increases with the amount of PBS in the samples. However, when relatively low amounts of PBS in the copolymer blends are present, the rate of stereocomplex formation is enhanced. This effect dissappears when higher amounts of PBS are present. The stereocomplexation was confirmed by FTIR and solid state 13C-NMR analyses.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/polym10010008

Cites

40 of 40 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 DSC scans at 20 °C/min for the homopolymers and copolymers: (a) cooling; and (b) second heating.
Figure 1 DSC scans at 20 °C/min for the homopolymers and copolymers: (a) cooling; and (b) second heating.CC BY · PubMed Central
Figure 2 PLOM micrographs for (a) DL1006.1; (b) LL1005.4; (c) BS1007.4; (d) LL705.4-mb-BS307.4; (e) LL205.4-mb-BS807.4; and (f) DL206.1-mb-BS807.4, during isothermal crystallization at the indicated Tc.
Figure 2 PLOM micrographs for (a) DL1006.1; (b) LL1005.4; (c) BS1007.4; (d) LL705.4-mb-BS307.4; (e) LL205.4-mb-BS807.4; and (f) DL206.1-mb-BS807.4, during isothermal crystallization at the indicated Tc.CC BY · PubMed Central
Figure 3 PBS crystallization at 65 °C from a PLLA spherulite (Tc = 115 °C) within a LL205.4-mb-BS807.4 copolymer.
Figure 3 PBS crystallization at 65 °C from a PLLA spherulite (Tc = 115 °C) within a LL205.4-mb-BS807.4 copolymer.CC BY · PubMed Central
Figure 4 Overall crystallization rate (1/τ50% exp) versus crystallization temperature (Tc) for (a) PLLA homopolymer and PLLA blocks within the LL705.4-mb-BS307.4 copolymer; and (b) PBS homopolymer and PBS blocks within LL205.4-co-BS807.4 copolymer.
Figure 4 Overall crystallization rate (1/τ50% exp) versus crystallization temperature (Tc) for (a) PLLA homopolymer and PLLA blocks within the LL705.4-mb-BS307.4 copolymer; and (b) PBS homopolymer and PBS blocks within LL205.4-co-BS807.4 copolymer.CC BY · PubMed Central
Figure 5 Glass transition temperature (Tg) versus PLA content (XPLA) for different homopolymers, copolymers and copolymer/homopolymer blends. The solid line represents the fitting to the Fox equation.
Figure 5 Glass transition temperature (Tg) versus PLA content (XPLA) for different homopolymers, copolymers and copolymer/homopolymer blends. The solid line represents the fitting to the Fox equation.CC BY · PubMed Central
Figure 6 Non-isothermal DSC (a) first heating, (b) cooling, and (c) second heating scans at 20 °C/min for the indicated stereocomplexes. The dashed line represents the peak crystallization and melting temperature for the L100/D100 stereocomplex.
Figure 6 Non-isothermal DSC (a) first heating, (b) cooling, and (c) second heating scans at 20 °C/min for the indicated stereocomplexes. The dashed line represents the peak crystallization and melting temperature for the L100/D100 stereocomplex.CC BY · PubMed Central
Figure 7 Crystallization degree, crystallization, and melting temperature versus the PBS content for the copolymer/copolymer and copolymer/homopolymer stereocomplexes.
Figure 7 Crystallization degree, crystallization, and melting temperature versus the PBS content for the copolymer/copolymer and copolymer/homopolymer stereocomplexes.CC BY · PubMed Central
Figure 8 PLOM micrographs for (a) L100/D100; (b) L70B30/D70B30; (c) L20B80/D20B80; (d) L70B30/D100; (e) D70B30/L100; (f) L20B80/D100; and (g) D20B80/L100, during isothermal crystallization at the indicated Tc.
Figure 8 PLOM micrographs for (a) L100/D100; (b) L70B30/D70B30; (c) L20B80/D20B80; (d) L70B30/D100; (e) D70B30/L100; (f) L20B80/D100; and (g) D20B80/L100, during isothermal crystallization at the indicated Tc.CC BY · PubMed Central
Figure 9 Overall crystallization rate (1/τpeak exp) versus crystallization temperature (Tc) for PLA stereocomplexes.
Figure 9 Overall crystallization rate (1/τpeak exp) versus crystallization temperature (Tc) for PLA stereocomplexes.CC BY · PubMed Central
Figure 10 Infrared spectrum of the PLA stereocomplexes. Sensitive bands to the formation of PLA stereocomplexes. The dashed line indicates the position of the 909 cm−1 band.
Figure 10 Infrared spectrum of the PLA stereocomplexes. Sensitive bands to the formation of PLA stereocomplexes. The dashed line indicates the position of the 909 cm−1 band.CC BY · PubMed Central
Figure 11 Proton-decoupled 13C spectrum of homopolymers, copolymers, and mixtures thereof to form PLA stereocomplexes (400 MHz).
Figure 11 Proton-decoupled 13C spectrum of homopolymers, copolymers, and mixtures thereof to form PLA stereocomplexes (400 MHz).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 2

  1. Wunderlich, B. (1976). Macromolecular Physics, Vol. 2 Crystal Nucleation, Growth, Annealing, Academic Press.
  2. Mandelkern, L. (2004). Crystallization of Polymers: Volume 2: Kinetics and Mechanisms, Cambridge University Press. [2nd ed.].

Cited by

See all 22

Metadata

Authors
D’Ambrosio, R., Michell, R., Mincheva, R., Hernández, R., Mijangos, C., Dubois, P., & Müller, A.
Affiliations
  • Universidad Simón Bolívar (VE)
  • University of Mons (BE)
  • Consejo Superior de Investigaciones Científicas (ES)
  • Laboratory of Polymeric and Composite Materials, Center of Innovation and Research in Materials & Polymers (CIRMAP), University of Mons-Hainaut, Place du Parc 20, B-7000 Mons, Belgium
  • Ikerbasque (ES)
Corresponding author
Müller, Alejandro
Venue
Polymers
Publisher
MDPI AG
Published
2017-12-22
Volume
10
Issue
1
Pages
8
ISSN
2073-4360 (ISSN-L)
OpenAlex
W2778590211
Cited by
22
References
40
Citations by year
2025: 4 · 2024: 1 · 2023: 6 · 2021: 3 · 2020: 3 · 2019: 3 · 2018: 2
FWCI
1.25
Type
journal article
Language
en
Open access
Locations
  • Polymers (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • ORBi UMONS (submittedVersion, other-oa)
  • Communities in ADDI (Universidad del Pais Vasco) (submittedVersion, other-oa)
  • DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, cc-by)
  • LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Hispana (submittedVersion, cc-by)
  • ORBi UMONS (submittedVersion)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
stereocomplexation, crystallization kinetics, Avrami exponent, spherulites, poly(L-lactic acid), poly(D-lactide), poly(butylene succinate), block copolymer blends, miscibility

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.