Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.

Preparation of Polypropylene Micro and Nanofibers by Electrostatic-Assisted Melt Blown and Their Application

Open access
Pu, Yi, Zheng, Jie, Chen, Fuxing, Long, Yunze, Wu, Han, Li, Qiusheng, Yu, Shuxin, Wang, Xiaoxiong, Ning, Xin · 2018 · Polymers

Abstract

In this paper, a novel electrostatic-assisted melt blown process was reported to produce polypropylene (PP) microfibers with a diameter as fine as 600 nm. The morphology, web structure, pore size distribution, filtration efficiency, and the stress and strain behavior of the PP nonwoven fabric thus prepared were characterized. By introducing an electrostatic field into the conventional melt-blown apparatus, the average diameter of the melt-blown fibers was reduced from 1.69 to 0.96 μm with the experimental setup, and the distribution of fiber diameters was narrower, which resulted in a filter medium with smaller average pore size and improved filtration efficiency. The polymer microfibers prepared by this electrostatic-assisted melt blown method may be adapted in a continuous melt blown process for the production of filtration media used in air filters, dust masks, and so on.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/polym10090959

Cites

34 of 34 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 The schematic illustration of the electrostatic-assisted melt-blown system setup (a) and the details around the spinning head (b,c).
Figure 1 The schematic illustration of the electrostatic-assisted melt-blown system setup (a) and the details around the spinning head (b,c).CC BY · PubMed Central
Figure 2 SEM graphs of the polypropylene (PP) microfiber prepared under different voltages or electric field distances by electrostatic-assisted melt blown. (a) to (e) show PP microfiber prepared in voltage of 0 kV (a), 10 kV (b), 20 kV (c), 30 kV (d) and 40 kV (e); (e) to (g) show PP microfiber prepared in electric field distance of 20 cm (e), 15 cm (f) and 10 cm (g).
Figure 2 SEM graphs of the polypropylene (PP) microfiber prepared under different voltages or electric field distances by electrostatic-assisted melt blown. (a) to (e) show PP microfiber prepared in voltage of 0 kV (a), 10 kV (b), 20 kV (c), 30 kV (d) and 40 kV (e); (e) to (g) show PP microfiber prepared in electric field distance of 20 cm (e), 15 cm (f) and 10 cm (g).CC BY · PubMed Central
Figure 3 Fiber diameter of fabric prepared under different voltages (a), collecting distances (b), and electric field strength’s influence on average diameter (c). The error bars in (a,b) represent the standard deviation of fiber diameter for each group of samples.
Figure 3 Fiber diameter of fabric prepared under different voltages (a), collecting distances (b), and electric field strength’s influence on average diameter (c). The error bars in (a,b) represent the standard deviation of fiber diameter for each group of samples.CC BY · PubMed Central
Figure 4 Fiber diameter distributions of PP nonwoven fabric prepared by conventional melt blowing (a) and electrostatic-assisted melt blown (b). Insets are the diameter distributions of each group in the 0–3 μm range.
Figure 4 Fiber diameter distributions of PP nonwoven fabric prepared by conventional melt blowing (a) and electrostatic-assisted melt blown (b). Insets are the diameter distributions of each group in the 0–3 μm range.CC BY · PubMed Central
Figure 5 Stress-strain curve of electrostatic-assisted melt-blown fabric and conventional melt-blown fabric.
Figure 5 Stress-strain curve of electrostatic-assisted melt-blown fabric and conventional melt-blown fabric.CC BY · PubMed Central
Figure 6 Pore size distribution and air permeability of conventional melt-blown fabric (a) and electrostatic-assisted melt-blown fabric (b).
Figure 6 Pore size distribution and air permeability of conventional melt-blown fabric (a) and electrostatic-assisted melt-blown fabric (b).CC BY · PubMed Central
Figure 7 Filtration efficiency of melt-blown fabric and electrostatic-assisted melt-blown fabric.
Figure 7 Filtration efficiency of melt-blown fabric and electrostatic-assisted melt-blown fabric.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 2

  1. Chen, 2017, Melt electro-blowing spinning for preparation of nanofibers, Plastics, 46, 121
  2. Deng, 2010, Investigation on producing micro-nano fibers by melt electrospinning, Mater. Sci. Technol., 18, 425

Cited by

See all 117

Metadata

Authors
Pu, Y., Zheng, J., Chen, F., Long, Y., Wu, H., Li, Q., Yu, S., Wang, X., & Ning, X.
Affiliations
  • Qingdao University (CN)
  • Collaborative Innovation Center for Nanomaterials & Devices, College of Physics, Qingdao University, Qingdao 266071, China
Corresponding author
  • Zheng, Jie
  • Ning, Xin
Venue
Polymers
Publisher
MDPI AG
Published
2018-08-29
Volume
10
Issue
9
Pages
959
ISSN
2073-4360 (ISSN-L)
OpenAlex
W2889428526
Cited by
116
References
34
Citations by year
2026: 8 · 2025: 12 · 2024: 17 · 2023: 21 · 2022: 22 · 2021: 17 · 2020: 14 · 2019: 5
FWCI
3.44
Type
journal article
Language
en
Open access
Locations
  • Polymers (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
  • National Natural Science Foundation of China (51673103, 11747170)
  • Natural Science Foundation of Shandong Province (ZR2018BB043)
  • Postdoctoral Scientific Research Foundation of Qingdao (2016014, 2017012)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
  • Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
  • Physical Sciences › Materials Science › Polymers and Plastics › Textile materials and evaluations
Keywords
polypropylene, nanofibers, microfibers, nonwoven fabrics, filter media, pore size distribution, filtration efficiency, fiber diameter, air filters, dust masks

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.