Preparation of Polypropylene Micro and Nanofibers by Electrostatic-Assisted Melt Blown and Their Application
Open accessThe DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Abstract
In this paper, a novel electrostatic-assisted melt blown process was reported to produce polypropylene (PP) microfibers with a diameter as fine as 600 nm. The morphology, web structure, pore size distribution, filtration efficiency, and the stress and strain behavior of the PP nonwoven fabric thus prepared were characterized. By introducing an electrostatic field into the conventional melt-blown apparatus, the average diameter of the melt-blown fibers was reduced from 1.69 to 0.96 μm with the experimental setup, and the distribution of fiber diameters was narrower, which resulted in a filter medium with smaller average pore size and improved filtration efficiency. The polymer microfibers prepared by this electrostatic-assisted melt blown method may be adapted in a continuous melt blown process for the production of filtration media used in air filters, dust masks, and so on.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“In addition to high packing density, filtration efficiency can be dramatically improved by electrostatic charges imparted on the filter fibers. 15”
From Assessment of N95 and K95 respirator decontamination: fiber integrity, filtration efficiency, and dipole charge density (2020) · cites this paper as [15]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Controlling the Fiber Diameter during Electrospinning
Fridrikh, S. V., Yu, J. H., Brenner, M. P., & Rutledge, G. C. (2003) · Physical Review Letters · doi:10.1103/physrevlett.90.144502 · Cited by 941
Electrospinning versus fibre production methods: from specifics to technological convergence
Luo, C. J., Stoyanov, S. D., Stride, E., Pelan, E., & Edirisinghe, M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35083a · Cited by 691
Melt blown nanofibers: Fiber diameter distributions and onset of fiber breakup
Ellison, C. J., Phatak, A., Giles, D. W., Macosko, C. W., & Bates, F. S. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.005 · Cited by 497
Fabrication of nanofiber meltblown membranes and their filtration properties
Hassan, M. A., Yeom, B. Y., Wilkie, A., Pourdeyhimi, B., & Khan, S. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.09.050 · Cited by 267
Melt electrospinning of low‐density polyethylene having a low‐melt flow index
Deng, R., Liu, Y., Ding, Y., Xie, P., Luo, L., & Yang, W. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29864 · Cited by 153
Zhang, H., Liu, J., Zhang, X., Huang, C., & Jin, X. (2018) · RSC Advances · doi:10.1039/c7ra10916d · Cited by 151
Meltblown nanofiber media for enhanced quality factor
Uppal, R., Bhat, G. S., Eash, C., & Akato, K. M. (2013) · Fibers and Polymers · doi:10.1007/s12221-013-0660-z · Cited by 135
Melt electrospinning of polycaprolactone and its blends with poly(ethylene glycol)
Detta, N., Brown, T. D., Edin, F. K., Albrecht, K., Chiellini, F., Chiellini, E., Dalton, P. D., & Hutmacher, D. W. (2010) · Polymer International · doi:10.1002/pi.2954 · Cited by 116
Li, H., Wu, W., Bubakir, M. M., Chen, H., Zhong, X., Liu, Z., Ding, Y., & Yang, W. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40080 · Cited by 105
Xiao, H., Song, Y., & Chen, G. (2014) · Journal of Electrostatics · doi:10.1016/j.elstat.2014.05.006 · Cited by 103
Research works printed but not linked: 2
- Chen H. He W. Qin Y. Ma X. Li H. Melt electro-blowing spinning for preparation of nanofibers Plastics 2017 46 121 124
- Deng R. Liu Y. Zheng Y. Yang W. Investigation on producing micro-nano fibers by melt electrospinning Mater. Sci. Technol. 2010 18 425 433
Cited by
COVID-19: Performance study of microplastic inhalation risk posed by wearing masks
Li, L., Zhao, X., Li, Z., & Song, K. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124955 · Cited by 202
Cui, J., Wang, Y., Lu, T., Liu, K., & Huang, C. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.03.174 · Cited by 172
Venkatesan, M., Veeramuthu, L., Liang, F., Chen, W., Cho, C., Chen, C., Chen, J., Yan, Y., Chang, S., & Kuo, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125431 · Cited by 154
Meltblown technology for production of polymeric microfibers/nanofibers: A review
Drábek, J., & Zatloukal, M. (2019) · Physics of Fluids · doi:10.1063/1.5116336 · Cited by 147
Protective Face Masks: Current Status and Future Trends
Tuñón‐Molina, A., Takayama, K., Redwan, E. M. M. M., Uversky, V. N., Andrés, J., & Serrano‐Aroca, Á. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c12227 · Cited by 137
Peng, F., Liu, D., Zhao, W., Zheng, G., Ji, Y., Dai, K., Mi, L., Zhang, D., Liu, C., & Shen, C. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104068 · Cited by 132
Air-Filtering Masks for Respiratory Protection from PM2.5 and Pandemic Pathogens
Xu, J., Xiao, X., Zhang, W., Xu, R., Kim, S. C., Cui, Y., Howard, T. T., Wu, E., & Cui, Y. (2020) · One Earth · doi:10.1016/j.oneear.2020.10.014 · Cited by 122
Cho, Y., Son, Y., Ahn, J., Lim, H., Ahn, S., Lee, J., Bae, P. K., & Kim, I. (2022) · ACS Nano · doi:10.1021/acsnano.2c09165 · Cited by 105
Filtration mechanisms and manufacturing methods of face masks: An overview
Adanur, S., & Jayswal, A. (2020) · Journal of Industrial Textiles · doi:10.1177/1528083720980169 · Cited by 95
Polylactic Acid (PLA) Melt-Blown Nonwovens with Superior Mechanical Properties
Liu, G., Guan, J., Wang, X., Yu, J., & Ding, B. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c00159 · Cited by 86
Self-citationBiodegradable hydro-charging polylactic acid melt-blown nonwovens with efficient PM0.3 removal
Gao, H., Liu, G., Guan, J., Wang, X., Yu, J., & Ding, B. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141412 · Cited by 80
Self-citationPolymer Materials for Respiratory Protection: Processing, End Use, and Testing Methods
Armentano, I., Barbanera, M., Carota, E., Crognale, S., Marconi, M., Rossi, S., Rubino, G., Scungio, M., Taborri, J., & Calabrò, G. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01151 · Cited by 84
Advances in Nanofiber Filtration Membranes: From Principles to Intelligent Applications
Shi, S., Bai, W., Chen, X., Si, Y., Zhi, C., Wu, H., Su, Y., Cai, W., Fei, B., Kan, C. W., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202423284 · Cited by 102
Self-citationProspect of microplastic pollution control under the “New normal” concept beyond COVID-19 pandemic
Haque, F., & Fan, C. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133027 · Cited by 74
Han, M., He, H., Kong, W.-K., Dong, K., Wang, B.-Y., Yan, X., Wang, L., & Ning, X. (2022) · Fibers and Polymers · doi:10.1007/s12221-022-4786-8 · Cited by 60
Self-citationGraphene-based membranes for membrane distillation applications: A review
Seraj, S., Mohammadi, T., & Tofighy, M. A. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.107974 · Cited by 60
Bussan, D. D., Snaychuk, L., Bartzas, G., & Douvris, C. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151924 · Cited by 58
Cimini, A., Imperi, E., Picano, A., & Rossi, M. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101833 · Cited by 63
Polymer chemistry underpinning materials for triboelectric nanogenerators (TENGs): Recent trends
Dzhardimalieva, G. I., Yadav, B. C., Лифинцева, Т. В., & Uflyand, I. Е. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110163 · Cited by 55
One-step melt blowing process for PP/PEG micro-nanofiber filters with branch networks
Zhang, H., Zhen, Q., Liu, Y., Liu, R., & Zhang, Y. (2019) · Results in Physics · doi:10.1016/j.rinp.2019.01.012 · Cited by 49
Zhang, X., Wang, Y., Liu, W. H., & Jin, X. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.120146 · Cited by 49
Rodríguez, N. B., Formentini, G., Favi, C., & Marconi, M. (2021) · Sustainability · doi:10.3390/su13094948 · Cited by 50
Zhao, L., Liang, X., Ni, Z., Zhao, H., Ge, B., & Li, W. (2022) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2022.131988 · Cited by 46
Chen, K., Zhou, S., Long, Y., Xu, H., Zhou, J., Jiang, Z., Xi, M., & Zheng, H. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.166332 · Cited by 45
Self-citationA review of wipes used to disinfect hard surfaces in health care facilities
Boyce, J. M. (2020) · American Journal of Infection Control · doi:10.1016/j.ajic.2020.06.183 · Cited by 45
Rodríguez, N. B., Formentini, G., Favi, C., & Marconi, M. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.01.108 · Cited by 41
Kubo, A.-L., Rausalu, K., Savest, N., Žusinaite, E., Vasiliev, G., Viirsalu, M., Plamus, T., Krumme, A., Merits, A., & Bondarenko, O. M. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14122549 · Cited by 39
Kasbe, P. S., Gade, H., Liu, S., Chase, G. G., & Xu, W. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c00367 · Cited by 36
Liu, G., Guan, J., Wang, X., Yu, J., & Ding, B. (2024) · Engineering · doi:10.1016/j.eng.2023.02.021 · Cited by 31
Self-citationSelected Respiratory Protective Devices: Respirators and Significance of Some Markings
Otřísal, P., Bungau, C. C., Obšel, V., Melichařík, Z., & Tonţ, G. (2021) · Sustainability · doi:10.3390/su13094988 · Cited by 29
Exudation of microplastics from commonly used face masks in COVID-19 pandemic
Bhangare, R. C., Tiwari, M., Ajmal, P. Y., Rathod, T. D., & Sahu, S. K. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-24702-1 · Cited by 34
Electrocharged facepiece respirator fabrics using common materials
Bandi, M. M. (2020) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2020.0469 · Cited by 33
Advances of polyolefins from fiber to nanofiber: fabrication and recent applications
Zakaria, M., Bhuiyan, M. A. R., Hossain, M. S., Khan, N. M.-M. U., Salam, M. A., & Nakane, K. (2024) · Discover Nano · doi:10.1186/s11671-023-03945-y · Cited by 31
Hu, R. Q., Huang, Q., Liu, G., Jiao, W., Yang, Q., Wang, X., Yu, J., & Ding, B. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c00500 · Cited by 29
Self-citationXing, J. W., Zhang, W., Sun, S., & Liu, Z. (2024) · RSC Advances · doi:10.1039/d4ra01278j · Cited by 26
Liu, G., Wang, X., Yu, J., & Ding, B. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.126575 · Cited by 25
Self-citationNude and Modified Electrospun Nanofibers, Application to Air Purification
Espinoza-Montero, P. J., Montero-Jiménez, M., Rojas-Quishpe, S., Alcívar-León, C. D., Heredia‐Moya, J., Rosero-Chanalata, A., Orbea-Hinojosa, C., & Piñeiros, J. L. (2023) · Nanomaterials · doi:10.3390/nano13030593 · Cited by 28
Assessment of microplastic exposure in nasal lavage fluid and the influence of face masks
Zhang, M., Liu, T., Zhang, L., Hua, Z., Guo, Z., Dong, J., Tan, Q., Xie, Y., Yin, X., Yan, L., et al. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.136069 · Cited by 23
Park, C.-W., Yanar, N., Ahmad, I., Jee, H., Khirul, M. A., Lee, T., Chae, S., Kim, S., Kang, S. B., Kim, J., et al. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.118594 · Cited by 21
Yim, W., Cheng, D., Patel, S., Kui, R., Meng, Y. S., & Jokerst, J. V. (2020) · medRxiv · doi:10.1101/2020.07.07.20148551 · Cited by 104
Recent progress in electrospun nanofiber separators for advanced lithium-ion batteries
Ding, W., Ru, C., & Xu, L. P. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114200 · Cited by 19
Drábek, J., & Zatloukal, M. (2020) · Physics of Fluids · doi:10.1063/5.0020773 · Cited by 17
Advances in nanofiber membrane
Sarbatly, R., Sariau, J., & Alam, M. F. I. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.05.483 · Cited by 17
El-Sayyad, G. S., Elfadil, D., Gaballah, M. S., El‐Sherif, D. M., Abouzid, M., Nada, H. G., Khalil, M. S., & Ghorab, M. A. (2023) · RSC Advances · doi:10.1039/d3ra01052j · Cited by 18
Lee, J., & Lee, K. J. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100818 · Cited by 15
Photoluminescence sensing of Pb2+ using cellulose acetate nanofiber decorated with Au nanoparticles
Mousa, N., El-Hosainy, H. M., Shoueir, K. R., & El-Kemary, M. A. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.167481 · Cited by 15
Shim, E., Noh, J., & Kim, Y. (2022) · ACS Omega · doi:10.1021/acsomega.2c04758 · Cited by 15
Paliwal, R., Kumar, M., Bhatt, H. B., Vaya, D., Prasad, G., & Surolia, P. K. (2024) · SPE Polymers · doi:10.1002/pls2.10147 · Cited by 14
Zhang, H., Zhen, Q., Liu, Y., Liu, R., & Zhang, Y. (2019) · Journal of Engineered Fibers and Fabrics · doi:10.1177/1558925019850798 · Cited by 14
Melt-blowing of silicane-modified phenolic fibrous mat for personal thermal protection
Zhang, L., Wu, J.-C., Yang, X., Di, Y., & Zhuang, X. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.131076 · Cited by 13
Eticha, A. K., Akgül, Y., Pakolpakçıl, A., Unlu, O. K., Çuğ, H., & Kılıç, A. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55297 · Cited by 13
COVID-19 and respiratory protection for healthcare providers
Sözkes, S., & Sozkes, S. (2020) · International Journal of Occupational Medicine and Environmental Health · doi:10.13075/ijomeh.1896.01666 · Cited by 15
Lv, D., Xu, J., Zhou, P., Tu, S., Xu, F., Yan, J., Xi, H., Liu, Z., Yuan, W., Fu, Q., et al. (2022) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2021.12.024 · Cited by 13
Lin, X., Lin, M., Li, T., Lü, H., Qi, H., Chen, T., Wu, L., & Zhang, C. (2023) · Polymers · doi:10.3390/polym15163365 · Cited by 13
Hoda, N., Sivri, F. M., Kara, F., Atasağun, H. G., & Bhat, G. S. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-9155-5 · Cited by 13
Regeneration of an electret filter by contact electrification
Eun, J., Lee, H., & Jeon, S. (2021) · RSC Advances · doi:10.1039/d0ra09769a · Cited by 12
Ray, S. S., Soni, R., Huyen, D. T. T., Ravi, S., Myung, S., Lee, C. Y., & Kwon, Y. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53584 · Cited by 12
Release of microplastics from disposable face mask in tropical climate
Gupta, D. K., Vishwakarma, A., & Singh, A. K. (2023) · Regional Studies in Marine Science · doi:10.1016/j.rsma.2023.102847 · Cited by 14
Ethanol-Drying Regeneration of N95 RespiratorsPreprint
Nazeeri, A., Hilburn, I. A., Wu, D.-A. J., Mohammed, K. A., Badal, D. Y., Chan, M. H. W., & Kirschvink, J. L. (2020) · medRxiv · doi:10.1101/2020.04.12.20059709 · Cited by 12
Jiang, T., Zeng, G., Hu, C., Meng, C., & Chen, Y. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-0653-2 · Cited by 11
Ionic liquid based antimicrobial coating on polymeric surface: A green chemistry approach
Sasi, R., Lathikumari, S. S., Ramesh, G., Sherin, D. R., Kaviyil, J. E., Paul, W., & Joseph, R. (2021) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2021.100026 · Cited by 10
Functional liquid layer enables superior performance of air purification filter
Wang, Q., Sheng, Y., Song, X., Qiu, Y., Li, X., Shang, C., Wang, Y., & Yu, J. (2025) · Chem · doi:10.1016/j.chempr.2025.102526 · Cited by 10
Zakaria, M., Shibahara, K., Bhuiyan, A. H., & Nakane, K. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52657 · Cited by 10
Hierarchical Supramolecular Nanofibers in Meltblown Microfiber Mats for High-Efficiency Filtration
Xue, L., Hu, M., Liu, C., Li, H., Hu, Y., Zhou, J., Li, Y., & Zhuang, X. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c01358 · Cited by 9
Zhu, J., Saberian, M., Li, J., Wang, L., & Maqsood, T. (2024) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2024.107857 · Cited by 9
A Fiber Sliding–Orientation Based Micromechanics Failure Model for Melt-Blown Nonwovens
Liu, G., Liu, L., Wang, X., Yu, J., & Ding, B. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c01853 · Cited by 9
Self-citationChaudhary, S. K., Chaudhary, N., Chaudhary, R., & Chaudhary, N. K. (2022) · PeerJ Materials Science · doi:10.7717/peerj-matsci.20 · Cited by 8
Fabrication of biodegradable nanofibers via melt extrusion of immiscible blends
Guo, Z., Wang, Z., Qin, Y., Zhang, J., Qi, Y., Liu, B., & Pan, W. (2022) · e-Polymers · doi:10.1515/epoly-2022-0059 · Cited by 7
Preliminary study on the ejection of microplastics from different types of face masks
Esmeralda, G., V, Patterson, J., & Shelciya, S. (2025) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2024.2443198 · Cited by 8
Song, S., Ham, W., & Ahn, S. (2022) · Current Applied Physics · doi:10.1016/j.cap.2022.01.014 · Cited by 7
Landi, D., Marconi, M., Bocci, E., Gianvincenzi, M., & Spreafico, C. (2023) · Procedia CIRP · doi:10.1016/j.procir.2023.02.071 · Cited by 7
Single Use Personal Protective Equipment Reinforced Asphalt
Marconi, M., Landi, D., Bocci, E., Pietroni, G., & Mosconi, E. M. (2023) · Procedia CIRP · doi:10.1016/j.procir.2023.02.019 · Cited by 7
Nciri, N., & Kim, N. (2023) · Polymers · doi:10.3390/polym15244624 · Cited by 6
Ogbuoji, E. A., Myers, A., Haycraft, A., & Escobar, I. C. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.124594 · Cited by 6
Tomisawa, R., SHIBATA, Y., Kim, K., Sato, M., & MEGURO, E. (2025) · Journal of Textile Engineering · doi:10.4188/jte.240716a · Cited by 5
Eticha, A. K., Akgül, Y., Pakolpakçıl, A., Unlu, O. K., Çuğ, H., & Kılıç, A. (2023) · Journal of Innovative Engineering and Natural Science · doi:10.29228/jiens.70166 · Cited by 5
Israni, D. K., Soni, J., Singh, S. K., & Prajapati, B. G. (2024) · Water Air & Soil Pollution · doi:10.1007/s11270-024-07146-w · Cited by 5
Zhang, L., Zhou, Y., Zhu, Z., Yan, F., Tan, L., Weı, C., Wang, Z., Chen, Q., & Zhang, Y. (2024) · Journal of Oceanology and Limnology · doi:10.1007/s00343-024-3229-3 · Cited by 5
Ye, J., Zheng, Y., Li, X., Jiang, X., & Chen, D. (2024) · Analytica Chimica Acta · doi:10.1016/j.aca.2024.343240 · Cited by 5
PREVENCION Y MEDIDAS DE PROTECCION FRENTE A LA INFECCION POR SARS-COV-2.
Berríos, C. F., Olivares, C. A. F., Díaz, M. J. D., Acosta, A. R. S., & Carvajal, L. A. (2020) · Neumología Pediátrica · doi:10.51451/np.v15i2.59 · Cited by 5
Nanofibers in Respiratory Masks: An Alternative to Prevent Pathogen Transmission
Tabatabaei, S. N., Faridi‐Majidi, R., Boroumand, S., Norouz, F., Rahmani, M., Rezaie, F., Fayazbakhsh, F., & Majidi, R. F. (2022) · IEEE Transactions on NanoBioscience · doi:10.1109/tnb.2022.3181745 · Cited by 5
Polyolefin fiber, polyolefin fiber reinforced composites and their applications: a review
Sundaramoorthy, E., Mahanwar, P. A., Patil, J. R., & Mundhe, G. S. (2022) · Journal of Polymer Engineering · doi:10.1515/polyeng-2022-0259 · Cited by 5
Acar, Y., Çoban, M. B., Güngör, E., Doğan, M., & Turhan, Y. (2025) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2025.106463 · Cited by 4
Simulation of Breakup Process of Polymer Jet during Melt Blowing
Hao, X., & Zeng, Y. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-9745-7 · Cited by 4
ECO-DESIGN ACTIONS TO IMPROVE LIFE CYCLE ENVIRONMENTAL PERFORMANCE OF FACE MASKS IN THE PANDEMIC ERA
Rodríguez, N. B., Marconi, M., Favi, C., & Formentini, G. (2021) · Proceedings of the Design Society · doi:10.1017/pds.2021.133 · Cited by 6
Zou, F., Li, Y., Meng, L., Chen, M., Sun, X., Li, Z., & Wang, X. (2022) · Textile Research Journal · doi:10.1177/00405175221084279 · Cited by 4
Self-citationFree surface unconfined melt electrospinning: an emergent approach
Sheoran, N., Shabani, E., Priya, R., Adhikari, J., & Kakoria, A. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-12298-7 · Cited by 3
Antibacterial/Antiviral Face Masks: Processing, Characteristics, Challenges, and Sustainability
Hoque, M. E., Sarker, M. A., Arif, K., Ali, M. A., & El-bialy, T. H. (2023) · MIST INTERNATIONAL JOURNAL OF SCIENCE AND TECHNOLOGY · doi:10.47981/j.mijst.11(02)2023.421(61-79 · Cited by 3
Gunther, J., Girard, M., Dubé, M., & Tabiai, I. (2024) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4067165 · Cited by 2
Tracing Microplastics in the Human Body: From Detection to Disease Mechanisms
Talau, S. A., Chialda, M., Ichim, C., Dura, H., & Tanasescu, C. A. H. (2025) · Diagnostics · doi:10.3390/diagnostics15232971 · Cited by 3
Preparation of binder-free composite filters material and their efficient removal of slag powder
Wang, X., Chen, C., Li, Z., & Wang, X. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.105527 · Cited by 2
Self-citationLiquid-based materials for air purification
Zhang, Z., Zhang, Y., Liu, J., Han, Y., & Hou, X. (2025) · Review of Materials Research · doi:10.1016/j.revmat.2025.100072 · Cited by 2
Study of the Compressive Strength of Concrete with Polypropylene Microfiber
Antonov, S., Gravit, M., Meshalkin, E., Dmitriev, I., & Shchukin, A. V. (2021) · Lecture notes in civil engineering · doi:10.1007/978-3-030-83917-8_49 · Cited by 2
Zengin, H., Metan, G., & Ünal, S. (2020) · Flora the Journal of Infectious Diseases and Clinical Microbiology · doi:10.5578/flora.69790 · Cited by 1
Chen, C.-H., Lee, C.-F., & Hsiao, C. (2023) · Machines · doi:10.3390/machines11040476 · Cited by 1
Polypropylene plasma treatments
Mamun, A., & Sabantina, L. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19079-7.00010-5 · Cited by 1
Ahmedullah, M., Whiley, H., Fallowfield, H., & Köper, I. (2024) · Advanced Materials Interfaces · doi:10.1002/admi.202400155 · Cited by 1
Scaccabarozzi, D., Ponti, J., Gioria, S., Méhn, D., Sinkko, T., Ardente, F., & Fumagalli, F. (2025) · PLoS ONE · doi:10.1371/journal.pone.0313041 · Cited by 1
Electrospun Silk Fibroin/Cyclodextrin Nanofibers for Multifunctional Air Filtration
Mongyun, P., & Wanwong, S. (2025) · Fibers · doi:10.3390/fib13070094 · Cited by 1
Islam, A., Lahiri, S. K., Akhter, M. A., Imran, M., Mengmeng, D., & Liu, Y. (2026) · Polymer · doi:10.1016/j.polymer.2026.129634 · Cited by 1
Metadata
- Authors
- Pu, Y., Zheng, J., Chen, F., Long, Y., Wu, H., Li, Q., Yu, S., Wang, X., & Ning, X.
- Affiliations
- Qingdao University (CN)
- Collaborative Innovation Center for Nanomaterials & Devices, College of Physics, Qingdao University, Qingdao 266071, China
- Corresponding author
- Zheng, Jie
- Ning, Xin
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2018-08-29
- Volume
- 10
- Issue
- 9
- Pages
- 959
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC6403903
- OpenAlex
- W2889428526
- Cited by
- 116
- References
- 34
- Citations by year
- 2026: 8 · 2025: 12 · 2024: 17 · 2023: 21 · 2022: 22 · 2021: 17 · 2020: 14 · 2019: 5
- FWCI
- 3.44
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- National Natural Science Foundation of China (51673103, 11747170)
- Natural Science Foundation of Shandong Province (ZR2018BB043)
- Postdoctoral Scientific Research Foundation of Qingdao (2016014, 2017012)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Polymers and Plastics › Textile materials and evaluations
- Keywords
- polypropylene, nanofibers, microfibers, nonwoven fabrics, filter media, pore size distribution, filtration efficiency, fiber diameter, air filters, dust masks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.