The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Cellulose–Chitosan Antibacterial Composite Films Prepared from LiBr Solution
Abstract
Cellulose and chitosan solutions were prepared in 60% LiBr and mixed with a different weight ratio. The washing and drying of the prepared cellulose–chitosan composite films were performed under identical conditions. The color of the liquefied mixtures and films was initially transparent but changed from colorless to brownish yellow depending on the ratio of chitosan in the solution. The cross section observed in the SEM results indicated that the film developed with a higher ratio of chitosan was more robust and possessed greater antibacterial properties. FT-IR analysis of the films showed that hydrogen bonds between cellulose and chitosan in composite films were successfully achieved and retained excellent mechanical properties. The proper ratio of chitosan in the cellulose solution can increase the tensile strength and improve the elongation of the films; however, the E-modulus property was consistently reduced. The antibacterial activity and mechanical properties of the films were greatly improved as the amount of chitosan in the film increased.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The small shift in C=O stretching of amide I and the antisymmetric-NH3+ of chitosan was due to hydrogen bonds formed between the two ketone groups of curcumin and the chitosan matrix, resulting in an increased C=O bond energy [36,43].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [43]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Research works printed but not linked: 27
- Sen, 2013, Review of cellulose non-derivatizing solvent interactions with emphasis on activity in inorganic molten salt hydrates, ACS Sustain. Chem. Eng., 1, 858, 10.1021/sc400085a · DOI · Paper page
- VandeVyver, 2011, Recent Advances in the Catalytic Conversion of Cellulose, ChemCatChem, 3, 82, 10.1002/cctc.201000302 · DOI · Paper page
- Yang, 2015, Dissolution Characteristics and Regenerated Miscanthus Sinensis Holocellulose Film Prepared by Dissolving the LiBr Solution, J. Korea Tech. Assoc. Pulp Pap. Ind., 47, 89
- Yang, 2014, Cellulose dissolution in aqueous lithium bromide solutions, Cellulose, 21, 1175, 10.1007/s10570-014-0183-9 · DOI
- Zhou, 2000, Solubility of Cellulose in NaOH/Urea Aqueous Solution, Polym. J., 32, 866, 10.1295/polymj.32.866 · DOI · Paper page
- Feng, 2008, lan Research progress on dissolution and functional modification of cellulose in ionic liquids, J. Mol. Liq., 142, 1, 10.1016/j.molliq.2008.06.007 · DOI · Paper page
- Fink, 2001, Structure formation of regenerated cellulose materials from NNMO-solutions, Prog. Polym. Sci., 26, 1473, 10.1016/S0079-6700(01)00025-9 · DOI · Paper page
- Lindman, 2010, On the mechanism of dissolution of cellulose, J. Mol. Liq., 156, 76, 10.1016/j.molliq.2010.04.016 · DOI · Paper page
- He, 2011, Preparation of chitosan films using different neutralizing solutions to improve endothelial cell compatibility, J. Mater. Sci. Mater. Med., 22, 2791, 10.1007/s10856-011-4444-y · DOI
- Ostadhossein, 2015, Development of chitosan/bacterial cellulose composite films containing nanodiamonds as a potential flexible platform for wound dressing, Materials, 8, 6401, 10.3390/ma8095309 · DOI
- Jayakumar, 2011, Biomaterials based on chitin and chitosan in wound dressing applications, Biotechnol. Adv., 29, 322, 10.1016/j.biotechadv.2011.01.005 · DOI · Paper page
- Jang, 2008, Characterization of chitin and chitosan as a biomedical polymer, J. Korean Ind. Eng. Chem., 19, 457
- Saurabh, 2016, A review on chitosan-cellulose blends and nanocellulose reinforced chitosan biocomposites: Properties and their applications, Carbohydr. Polym., 150, 216, 10.1016/j.carbpol.2016.05.028 · DOI · Paper page
- Twu, 2003, Preparation and sorption activity of chitosan/cellulose blend beads, Carbohydr. Polym., 54, 425, 10.1016/j.carbpol.2003.03.001 · DOI
- Fu, 2017, Antibacterial blend films of cellulose and chitosan prepared from binary ionic liquid system, Fibers Polym., 18, 852, 10.1007/s12221-017-1130-9 · doi:10.1007/s12221-017-1130-9
- Trivedi, P., Saloranta-Simell, T., Maver, U., Gradišnik, L., Prabhakar, N., Smått, J.-H., Mohan, T., Gericke, M., Heinze, T., and Fardim, P. (2018). Chitosan–Cellulose Multifunctional Hydrogel Beads: Design, Characterization and Evaluation of Cytocompatibility with Breast Adenocarcinoma and Osteoblast Cells. Bioengineering, 5. · DOI
- Kuzmina, 2012, Blending of Cellulose and Chitosan in Alkyl Imidazolium Ionic Liquids, ISRN Polym. Sci., 2012, 1, 10.5402/2012/251950 · DOI
- Lin, 2012, Preparation and Characterization of Chitosan/Cellulose Blend Films using ZnCl2·3H2O as a Solvent, Bioresources, 7, 5488, 10.15376/biores.7.4.5488-5499 · doi:10.15376/biores.7.4.5488-5499
- Shih, 2009, Preparation and characterization of cellulose/chitosan blend films, Carbohydr. Polym., 78, 169, 10.1016/j.carbpol.2009.04.031 · DOI · Paper page
- Pereira, 2009, Properties and biocompatibility of chitosan films modified by blending with PVA and chemically crosslinked, J. Mater. Sci. Mater. Med., 20, 553, 10.1007/s10856-008-3627-7 · DOI · Paper page
- Negrea, 2015, The study of infrared spectrum of chitin and chitosan extract as potential sources of biomass, Dig. J. Nanomater. Biostruct., 10, 1129
- Silva, S.M.L., Braga, C.R.C., Fook, M.V.L., Raposo, C.M.O., Carvalho, L.H., and Canedo, E.L. (2012). Application of Infrared Spectroscopy to Analysis of Chitosan/Clay Nanocomposites. Infrared Spectrosc. Mater. Sci. Eng. Technol., 43–62. · DOI
- Xu, Y.X., Kim, K.M., Hanna, M.A., and Nag, D. (2005). Chitosan-starch composite film: Preparation and characterization. Ind. Crops Prod. · doi:10.1016/s0926-6690(04)00048-2
- Othman, 2016, Effect of concentration of chitosan on the mechanical, morphological and optical properties of tapioca starch film, Int. Food Res. J., 23, S187
- Venkatesan, 2014, Antimicrobial Activity of Chitosan-Carbon Nanotube Hydrogels, Materials, 7, 3946, 10.3390/ma7053946 · doi:10.3390/ma7053946
- Chung, 2008, Antibacterial characteristics and activity of acid-soluble chitosan, Bioresour. Technol., 99, 2806, 10.1016/j.biortech.2007.06.044 · DOI · Paper page
- Mohamed, 2012, Synthesis and Antimicrobial Activity of Some Novel Cross-Linked Chitosan Hydrogels, Int. J. Mol. Sci., 13, 11194, 10.3390/ijms130911194 · DOI
Cited by
Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin
Madian, N. G., El-Ashmanty, B. A., & Abdel-Rahim, H. K. (2023) · Polymers · doi:10.3390/polym15122587 · Cited by 66
Metadata
- Authors
- Yang, J., Kwon, G.-J., Hwang, K., & Kim, D.-Y.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2018-09-23
- Volume
- 10
- Issue
- 10
- Pages
- 1058
- ISSN
- 2073-4360
- Cited by
- 68
- References
- 1
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.