Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 76 of the 80 references it cites were found in a registry or an index, and 1 are not checked yet; none of the 143 sources its claims cite is checked for support yet.

Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin

Open access

Abstract

Chitosan is a natural biopolymer that can be used in biomedical applications, tissue engineering, and wound dressing because of its biodegradability, biocompatibility, and antibacterial activity. The blending of chitosan films with natural biomaterials such as cellulose, honey, and curcumin was studied at different concentrations in order to improve their physical properties. Fourier transform infrared (FTIR) spectroscopy, mechanical tensile properties, X-ray diffraction (XRD), antibacterial effects, and scanning electron microscopy (SEM) were studied for all blended films. The XRD, FTIR, and mechanical results showed that films blended with curcumin were more rigid and compatible and had higher antibacterial effects than other blended films. In addition, XRD and SEM showed that blending chitosan films with curcumin decreases the crystallinity of the chitosan matrix compared to cellulose and honey blending films due to increased intermolecular hydrogen bonding, which reduces the close packing of the CS matrix.

Checked 2026-11-18 · 1 reference not checked yet

Overview

CoChat Summary

TL;DR

Blending chitosan films with cellulose, honey, or curcumin at 0.25 g and 0.5 g was tested for structural, mechanical, and antibacterial changes. Curcumin blends were the most compatible and rigid and showed the strongest antibacterial effects, with 0.25 g curcumin increasing tensile strength and elongation while decreasing crystallinity.

Key findings

  • XRD and SEM showed that blending chitosan with curcumin decreased the crystallinity of the chitosan matrix due to increased intermolecular hydrogen bonding, which reduced close packing of the CS matrix; curcumin films were more rigid and compatible than cellulose- or honey-blended films.
  • Mechanical testing showed that 0.25 g curcumin significantly increased tensile strength and elongation at break (p ≤ 0.05) while decreasing Young’s modulus; 0.5 g curcumin had tensile strength higher than pure CS but lower than 0.25 g, with elongation significantly increased and Young’s modulus significantly decreased (p ≤ 0.05).
  • Antibacterial testing showed pure CS had a mild effect against E. coli and no effect against S. aureus; CS/Cel films had a strong significant antimicrobial effect against both E. coli and S. aureus, especially at 0.25 g.
  • For CS/Cur, the antibacterial effect against E. coli decreased at 0.25 g and then significantly increased at 0.5 g (p ≤ 0.05), while against S. aureus it significantly increased sharply at 0.25 g and disappeared at 0.5 g; at 0.5 g, the Cur blend showed the highest significant reduction against E. coli, followed by the Cel blend.

Methods

  • Experimental film study: chitosan films were blended with cellulose, honey, or curcumin at different concentrations and prepared by casting; pure chitosan films were used for comparison.
  • Characterization included XRD (5°–35° 2θ), FTIR (3900–700 cm⁻¹, 64 scans), SEM, tensile testing on 5 cm × 5 cm strips, and antibacterial testing by shake-flask method against Staphylococcus aureus (ATCC 6538) and Escherichia coli (ATCC 25922).
  • Statistical analysis used one-way ANOVA and Duncan’s test with SPSS 15.0; differences were considered significant at p ≤ 0.05, and data were presented as mean ± standard deviation, with tests repeated three times.

Limitations

  • Stated limitations: Not stated in the paper.
  • Evident from the text: only two additive concentrations (0.25 g and 0.5 g) per blend were tested, and no in vivo wound-healing, cytotoxicity, or biocompatibility assays are reported despite wound-dressing application claims.
  • Evident from the text: antibacterial testing was limited to two bacterial strains (S. aureus and E. coli), and XRD crystallinity changes are described qualitatively through peak shifts, intensity, and broadening rather than quantified crystallinity values.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/polym15122587

Cites

76 of 77 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 XRD for pure CS and CS-blended Cel at different concentrations.
Figure 1 XRD for pure CS and CS-blended Cel at different concentrations.CC BY · PubMed Central
Figure 2 XRD for pure CS and Cs-blended H at different concentrations.
Figure 2 XRD for pure CS and Cs-blended H at different concentrations.CC BY · PubMed Central
Figure 3 XRD for pure CS and CS-blended Cur at different concentrations.
Figure 3 XRD for pure CS and CS-blended Cur at different concentrations.CC BY · PubMed Central
Figure 4 XRD for pure CS and CS-blended Cel, H and Cur for 0.25 g (a) and 0.5 g (b).
Figure 4 XRD for pure CS and CS-blended Cel, H and Cur for 0.25 g (a) and 0.5 g (b).CC BY · PubMed Central
Figure 5 FTIR of pure CS and CS blended Cel films at different concentrations.
Figure 5 FTIR of pure CS and CS blended Cel films at different concentrations.CC BY · PubMed Central
Figure 6 FTIR of pure CS and CS blended H films at different concentrations.
Figure 6 FTIR of pure CS and CS blended H films at different concentrations.CC BY · PubMed Central
Figure 7 FTIR of pure CS and CS blended Cur films at different concentrations.
Figure 7 FTIR of pure CS and CS blended Cur films at different concentrations.CC BY · PubMed Central
Figure 8 FTIR of pure CS and CS blended Cel, H, and Cur for 0.25 g (a) and 0.5 g (b).
Figure 8 FTIR of pure CS and CS blended Cel, H, and Cur for 0.25 g (a) and 0.5 g (b).CC BY · PubMed Central
Figure 9 SEM for pure CS and CS blended with Cel, H and Cur at 0.25 g and 0.5 g (100,000×; to the left) and (50,000×; to the right).
Figure 9 SEM for pure CS and CS blended with Cel, H and Cur at 0.25 g and 0.5 g (100,000×; to the left) and (50,000×; to the right).CC BY · PubMed Central
Figure 10 Stress-strain curves for pure CS and CS blended films (a–c) at different concentrations.
Figure 10 Stress-strain curves for pure CS and CS blended films (a–c) at different concentrations.CC BY · PubMed Central
Figure 11 Tensile strength (a), Young’s modulus (b) and % elongation at break (c) for pure CS and CS-blended samples at different concentrations [* means that there is a significant change (p ≤ 0.05)].
Figure 11 Tensile strength (a), Young’s modulus (b) and % elongation at break (c) for pure CS and CS-blended samples at different concentrations [* means that there is a significant change (p ≤ 0.05)].CC BY · PubMed Central
Figure 12 Tensile strength for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].
Figure 12 Tensile strength for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].CC BY · PubMed Central
Figure 13 Young’s modulus for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].
Figure 13 Young’s modulus for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].CC BY · PubMed Central
Figure 14 Percent elongation at break for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].
Figure 14 Percent elongation at break for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].CC BY · PubMed Central

Verification

Claims the paper makes

0 Valid · 0 Not valid · 78 Not checked · 63 Own results and interpretations

58 more claims

Create a free account to see all 141 claims and to verify the 143 references still open.

See all claims — free account
  • It may state two separate claims as one. 75
  • The quote only partly states this claim. 1
  • Probably not a substantial claim. 4

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 80 references

Research works printed but not linked: 5

  1. Medhi, 2008, Topical application of honey in the treatment of wound healing: A metaanalysis, JK Sci., 10, 171603
  2. Mohamed, 2015, Synthesis of new benzofuran derivatives and evaluation of their antimicrobial activities, Res. J. Pharm. Biol. Chem. Sci., 6, 213
  3. Mejenom, 2018, X-Ray diffraction and infrared spectroscopic analysis of solid biopolymer electrolytes based on dual blend carboxymethyl cellulose-chitosan doped with ammonium bromide, ASM Sci. J., 11, 37
  4. Bhuvaneshwari, 2011, Development and characterization of chitosan film, Int. J. Eng. Res. Appl., 183, 254
  5. Sasikala, 2013, Manuka honey loaded chitosan hydrogel films for wound dressing applications, Int. J. PharmTech Res., 5, 1774

Cited by

See all 66

Metadata

Authors
Madian, N. G., El-Ashmanty, B. A., & Abdel-Rahim, H. K.
Affiliations
Cairo University (EG)
Corresponding author
Madian, Noha G.
Venue
Polymers
Publisher
MDPI AG
Published
2023-06-06
Volume
15
Issue
12
Pages
2587
ISSN
2073-4360 (ISSN-L)
OpenAlex
W4379798771
Cited by
66
References
80
Citations by year
2026: 29 · 2025: 24 · 2024: 9 · 2023: 4
FWCI
3.29
Type
journal article
Language
en
Open access
Locations
  • Polymers (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
  • Cairo University
  • Faculty of Science, Cairo University
Topics
  • Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
  • Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposite Synthesis and Irradiation
Keywords
chitosan films, polymer blending, cellulose, honey, curcumin, antibacterial activity, crystallinity, hydrogen bonding, wound dressings, biopolymer films

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin. https://app.cochat.ai/papers/10.3390/polym15122587
The paper
Madian, N. G., El-Ashmanty, B. A., & Abdel-Rahim, H. K. (2023). Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin. Polymers. https://doi.org/10.3390/polym15122587

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.