The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Thermoplastic Processing of PLA/Cellulose Nanomaterials Composites
Open accessAbstract
Over the past decades, research has escalated on the use of polylactic acid (PLA) as a replacement for petroleum-based polymers. This is due to its valuable properties, such as renewability, biodegradability, biocompatibility and good thermomechanical properties. Despite possessing good mechanical properties comparable to conventional petroleum-based polymers, PLA suffers from some shortcomings such as low thermal resistance, heat distortion temperature and rate of crystallization, thus different fillers have been used to overcome these limitations. In the framework of environmentally friendly processes and products, there has been growing interest on the use of cellulose nanomaterials viz. cellulose nanocrystals (CNC) and nanofibers (CNF) as natural fillers for PLA towards advanced applications other than short-term packaging and biomedical. Cellulosic nanomaterials are renewable in nature, biodegradable, eco-friendly and they possess high strength and stiffness. In the case of eco-friendly processes, various conventional processing techniques, such as melt extrusion, melt-spinning, and compression molding, have been used to produce PLA composites. This review addresses the critical factors in the manufacturing of PLA-cellulosic nanomaterials by using conventional techniques and recent advances needed to promote and improve the dispersion of the cellulosic nanomaterials. Different aspects, including morphology, mechanical behavior and thermal properties, as well as comparisons of CNC- and CNF-reinforced PLA, are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy
Iwamoto, S., Kai, W., Isogai, A., & Iwata, T. (2009) · Biomacromolecules · doi:10.1021/bm900520n · Cited by 754
Nakagaito, A. N., Fujimura, A., Sakai, T., Hama, Y., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.004 · Cited by 280
Pracella, M., Haque, M. M.-U., & Puglia, D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.071 · Cited by 193
Cited by
Seawater‐Degradable Polymers—Fighting the Marine Plastic Pollution
Wang, G., Huang, D., Ji, J., Völker, C., & Wurm, F. R. (2021) · Advanced Science · doi:10.1002/advs.202001121 · Cited by 440
Recent Advances in Bioplastics: Application and Biodegradation
Narancic, T., Cerrone, F., Beagan, N., & O’Connor, K. E. (2020) · Polymers · doi:10.3390/polym12040920 · Cited by 421
Recent Trends of Foaming in Polymer Processing: A Review
Jin, F.-L., Zhao, M., Park, M., & Park, S.-J. (2019) · Polymers · doi:10.3390/polym11060953 · Cited by 350
Nanocellulose-Based Nanocomposites for Sustainable Applications: A Review
Norizan, M. N., Shazleen, S. S., Alias, A. H., Sabaruddin, F. A., Asyraf, M. R. M., Zainudin, E. S., Abdullah, N., Samsudin, M. S., Kamarudin, S. H., & Norrrahim, M. N. F. (2022) · Nanomaterials · doi:10.3390/nano12193483 · Cited by 271
Cellulose nanomaterials: new generation materials for solving global issues
Mokhena, T. C., & John, M. J. (2020) · Cellulose · doi:10.1007/s10570-019-02889-w · Cited by 269
Self-citation
Metadata
- Authors
- Mokhena, T. C., Sefadi, J. S., Sadiku, E. R., John, M. J., Mochane, M. J., & Mtibe, A.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2018-12-09
- Volume
- 10
- Issue
- 12
- Pages
- 1363
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2904739514
- Cited by
- 193
- References
- 4
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.