The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Influence of Starch Composition and Molecular Weight on Physicochemical Properties of Biodegradable Films
Open accessAbstract
Thermoplastic starch (TPS) films are considered one of the most promising alternatives for replacing synthetic polymers in the packaging field due to the starch biodegradability, low cost, and abundant availability. However, starch granule composition, expressed in terms of amylose content and phosphate monoesters, and molecular weight of starch clearly affects some film properties. In this contribution, biodegradable TPS films made from potato, corn, wheat, and rice starch were prepared using the casting technique. The effect of the grain structure of each starch on microstructure, transparency, hydration properties, crystallinity, and mechanical properties of the films, was evaluated. Potato starch films were the most transparent and corn starch films the most opaque. All the films had homogeneous internal structures—highly amorphous and with no pores, both of which point to a good starch gelatinization process. The maximum tensile strength (4.48–8.14 MPa), elongation at break (35.41–100.34%), and Young’s modulus (116.42–294.98 MPa) of the TPS films were clearly influenced by the amylose content, molecular weight, and crystallinity of the film. In this respect, wheat and corn starch films, are the most resistant and least stretchable, while rice starch films are the most extensible but least resistant. These findings show that all the studied starches can be considered suitable for manufacturing resistant and flexible films with similar properties to those of synthetic low-density polyethylene (LDPE), by a simple and environmentally-friendly process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lopez‐Rubio, A., Flanagan, B. M., Gilbert, E. P., & Gidley, M. J. (2008) · Biopolymers · doi:10.1002/bip.21005 · Cited by 719
Hizukuri, S. (1985) · Carbohydrate Research · doi:10.1016/s0008-6215(00)90461-0 · Cited by 555
Talja, R. A., Helén, H., Roos, Y. H., & Jouppila, K. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.05.019 · Cited by 444
Effect of starch type on the physico-chemical properties of edible films
Basiak, E., Lenart, A., & Debeaufort, F. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.01.122 · Cited by 408
Structure, mechanical and barrier properties of amylose and amylopectin films
Rindlav-Westling, A., Stading, M., Hermansson, A.-M., & Gatenholm, P. (1998) · Carbohydrate Polymers · doi:10.1016/s0144-8617(98)00025-3 · Cited by 390
Thermoplastic Starch−Waxy Maize Starch Nanocrystals Nanocomposites
Angellier, H., Molina-Boisseau, S., Dole, P., & Dufresne, A. (2006) · Biomacromolecules · doi:10.1021/bm050797s · Cited by 350
Active and smart biodegradable packaging based on starch and natural extracts
Medina-Jaramillo, C., Ochoa-Yepes, O., Bernal, C., & Famá, L. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.079 · Cited by 349
Microstructural Characterization of Plasticized Starch-Based Films
García, M. A., Martino, M. N., & Zaritzky, N. (2000) · Starch - Stärke · doi:10.1002/1521-379x(200006)52:4<118::aid-star118>3.0.co;2-0 · Cited by 249
Dai, L., Zhang, J., & Cheng, F. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.197 · Cited by 232
Effect of amylose:amylopectin ratio and rice bran addition on starch films properties
Cano, A., Jiménez, A., Cháfer, M., Gónzalez, C., & Chiralt, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.075 · Cited by 227
Extrusion processing and characterization of edible starch films with different amylose contents
Li, M., Liu, P., Zou, W., et al. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.04.021 · Cited by 227
Thermo-compression of biodegradable thermoplastic corn starch films containing chitin and chitosan
Lopez, O., Garcia, M. A., Villar, M. A., Gentili, A., Rodriguez, M. S., & Albertengo, L. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2014.01.024 · Cited by 217
Properties and ageing behaviour of pea starch films as affected by blend with poly(vinyl alcohol)
Cano, A., Fortunati, E., Cháfer, M., Kenny, J. M., Chiralt, A., & González-Martínez, C. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.01.008 · Cited by 194
Effect of starch type on the properties of starch containing films
Lawton, J. W. (1996) · Carbohydrate Polymers · doi:10.1016/0144-8617(96)00028-8 · Cited by 182
Luchese, C. L., Benelli, P., Spada, J. C., & Tessaro, I. C. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46564 · Cited by 143
Mali, S., Karam, L. B., Ramos, L. P., & Grossmann, M. V. E. (2004) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf049225+ · Cited by 132
Biofilms based on cassava starch containing extract of yerba mate as antioxidant and plasticizer
Medina‐Jaramillo, C., Seligra, P. G., Goyanes, S., Bernal, C., & Famá, L. (2015) · Starch - Stärke · doi:10.1002/star.201500033 · Cited by 126
Origins of B-type crystallinity in glycerol-plasticised, compression-moulded potato starches
Hulleman, S. H. D., Kalisvaart, M. G., Janssen, F. H. P., Feil, H., & Vliegenthart, J. F. G. (1999) · Carbohydrate Polymers · doi:10.1016/s0144-8617(99)00024-7 · Cited by 125
Helix-breaking news: fighting crystalline starch energy deposits in the cell
Blennow, A., & Engelsen, S. B. (2010) · Trends in Plant Science · doi:10.1016/j.tplants.2010.01.009 · Cited by 115
Xie, F., Flanagan, B. M., Li, M., Sangwan, P., Truss, R. W., Halley, P. J., Strounina, E. V., Whittaker, A. K., Gidley, M. J., Dean, K., et al. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.058 · Cited by 97
Chen, X., Gong, H., Chen, Y., Yang, K., Dong, Y., & Zhou, H. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2006.08.011 · Cited by 88
Nanocomposite Films from Mango Kernel or Corn Starch with Starch Nanocrystals
de Oliveira, A. V., da Silva, A. P. M., Barros, M. D. O., Filho, M. D. S. M. D. S., Rosa, M. D. F., & de Azeredo, H. M. C. (2018) · Starch - Stärke · doi:10.1002/star.201800028 · Cited by 79
Studies on compatibility of biodegradable starch/polyvinyl alcohol blends
Sreekumar, P. A., Al-Harthi, M. A., & De, S. K. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23178 · Cited by 78
In vitro degradation of starch/PVA films and biocompatibility evaluation
Shi, R., Zhu, A., Chen, D., Jiang, X., Xu, X., Zhang, L., & Tian, W. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31136 · Cited by 59
Morales, N. J., Candal, R., Famá, L., Goyanes, S., & Rubiolo, G. H. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.071 · Cited by 57
Phetwarotai, W., Potiyaraj, P., & Aht‐Ong, D. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36736 · Cited by 50
Malmir, S., Montero, B., Rico, M., Barral, L., Bouza, R., & Farrag, Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.056 · Cited by 49
Velasquez, D., Pavon‐Djavid, G., Chaunier, L., Meddahi‐Pellé, A., & Lourdin, D. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.02.006 · Cited by 44
Physical and mechanical properties of LDPE incorporated with different starch sources
Kormin, S., Kormin, F. B., Beg, M. D. H., & Bijarimi, M. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/226/1/012157 · Cited by 38
Individual swollen starch granules under mechanical stress: evidence for deformation and volume loss
Desse, M., Fraiseau, D., Mitchell, J. R., & Budtova, T. (2009) · Soft Matter · doi:10.1039/b914911b · Cited by 31
Bhagabati, P., Hazarika, D., & Katiyar, V. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.199 · Cited by 25
Cited by
Cheng, H., Chen, L., McClements, D. J., Yang, T., Zhang, Z., Ren, F., Miao, M., Tian, Y., & Jin, Z. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.05.017 · Cited by 467
Polysaccharide nanoparticles: from fabrication to applications
Plucinski, A., Lyu, Z., & Schmidt, B. V. K. J. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00628b · Cited by 308
(Bio)Nanotechnology in Food Science—Food Packaging
Primožič, M., Knez, Ž., & Leitgeb, M. (2021) · Nanomaterials · doi:10.3390/nano11020292 · Cited by 290
Agro-industrial residues for microbial bioproducts: A key booster for bioeconomy
Cuadrado-Osorio, P. D., Ramírez-Mejía, J. M., Mejía-Avellaneda, L. F., Mesa, L., & Bautista, E. J. (2022) · Bioresource Technology Reports · doi:10.1016/j.biteb.2022.101232 · Cited by 67
Metadata
- Authors
- Domene-López, D., García-Quesada, J. C., Martin-Gullon, I., & Montalbán, M. G.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-06-26
- Volume
- 11
- Issue
- 7
- Pages
- 1084
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2956125771
- Cited by
- 268
- References
- 31
- FWCI
- 6.19
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.