The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Degradation Behavior of Polypropylene during Reprocessing and Its Biocomposites: Thermal and Oxidative Degradation Kinetics
Open accessAbstract
Non-isothermal thermogravimetric analysis (TGA) was employed to investigate the degradation of polypropylene (PP) during simulated product manufacturing in a secondary process and wood–plastic composites. Multiple batch mixing cycles were carried out to mimic the actual recycling. Kissinger–Akahira–Sunose (KAS), Ozawa–Flynn–Wall (OFW), Friedman, Kissinger and Augis models were employed to calculate the apparent activation energy (Ea). Experimental investigation using TGA indicated that the thermograms of PP recyclates shifted to lower temperatures, revealing the presence of an accelerated degradation process induced by the formation of radicals during chain scission. Reprocessing for five cycles led to roughly a 35% reduction in ultimate mixing torque, and a more than 400% increase in the melt flow rate of PP. Ea increased with the extent of degradation (α), and the dependency intensified with the reprocessing cycles. In biocomposites, despite the detectable degradation steps of wood and PP in thermal degradation, a partial coincidence of degradation was observed under air. Deconvolution was employed to separate the overlapped cellulose and PP peaks. Under nitrogen, OFW estimations for the deconvoluted PP exposed an upward shift of Ea at the whole range of α due to the high thermal absorbance of the wood chars. Under air, the Ea of deconvoluted PP showed an irregular rise in the initial steps, which could be related to the high volume of evolved volatiles from the wood reducing the oxygen diffusion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Effects of recycling on the microstructure and the mechanical properties of isotactic polypropylene
Aurrekoetxea, J., Sarrionandia, M. A., Urrutibeascoa, I., & Maspoch, M. L. (2001) · Journal of Materials Science · doi:10.1023/a:1017983907260 · Cited by 238
Characterization of wood plastic composites manufactured from recycled plastic blends
Turku, I., Keskisaari, A., Kärki, T., Puurtinen, A., & Marttila, P. (2017) · Composite Structures · doi:10.1016/j.compstruct.2016.11.073 · Cited by 163
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Chemical upcycling of polyethylene, polypropylene, and mixtures to high-value surfactants
Xu, Z., Munyaneza, N. E., Zhang, Q., Sun, M., Posada, C., Venturo, P., Rorrer, N. A., Miscall, J., Sumpter, B. G., & Liu, G. (2023) · Science · doi:10.1126/science.adh0993 · Cited by 349
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Velásquez, E., de Dicastillo, C. L., Rojas, A., Garrido, L., Pérez, C. J., Lira, M., Guarda, A., & Galotto, M. J. (2024) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2024.101272 · Cited by 16
Metadata
- Authors
- Esmizadeh, E., Tzoganakis, C., & Mekonnen, T. H.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2020-07-22
- Volume
- 12
- Issue
- 8
- Pages
- 1627
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3044659557
- Cited by
- 175
- References
- 3
- FWCI
- 5.78
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Degradation Behavior of Polypropylene during Reprocessing and Its Biocomposites: Thermal and Oxidative Degradation Kinetics. https://app.cochat.ai/papers/10.3390/polym12081627
- The paper
- Esmizadeh, E., Tzoganakis, C., & Mekonnen, T. H. (2020). Degradation Behavior of Polypropylene during Reprocessing and Its Biocomposites: Thermal and Oxidative Degradation Kinetics. Polymers. https://doi.org/10.3390/polym12081627
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.