Cited by 23

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Design and Evaluation of a New Natural Multi-Layered Biopolymeric Adsorbent System-Based Chitosan/Cellulosic Nonwoven Material for the Biosorption of Industrial Textile Effluents

EL-Ghoul, Yassine, Ammar, Chiraz, Alminderej, Fahad M., Shafiquzzaman, Md.·2021·Polymers

Abstract

The adsorption phenomenon using low-cost adsorbents that are abundant in nature is of great interest when the adsorbed capacity is significant. A newly designed natural polyelectrolyte multi-layered (PEM) biopolymeric system-based chitosan/modified chitosan polymer and functionalized cellulosic nonwoven material was prepared and used as an effective adsorbent for Reactive Red 198 (RR198) dye solutions. The bio-sorbent was characterized by FTIR, SEM, and thermal (TGA/DTA) analysis. The swelling behavior was also evaluated, showing the great increase of the hydrophilicity of the prepared adsorbent biopolymer. The effect of various process parameters on the performance of RR198 dye removal such as pH, contact time, temperature, and initial dye concentration was studied. The biopolymeric system has shown good efficiency of adsorption compared to other adsorbents based on chitosan polymer. The highest adsorption capacity was found to be 722.3 mgg−1 at pH = 4 (ambient temperature, time = 120 min and dye concentration = 600 mg L−1). The adsorption process fitted well to both pseudo-second-order kinetics and Freundlich/Temkin adsorption isotherm models. Regarding its low cost, easy preparation, and promising efficient adsorption results, this new concepted multi-layered bio-sorbent could be an effective solution for the treatment of industrial wastewater.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/polym13030322

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 61

  1. Meral, 2008, Adsorption of basic dyes from single and binary component systems onto bentonite: Simultaneous analysis of basic red 46 and basic yellow 28 by first order derivative spectrophotometric analysis method, J. Hazard. Mater., 158, 2
  2. Dalia, 2012, Batch adsorption of basic dye using acid treated kenaf fibre char: Equilibrium, kinetic and thermodynamic studies, Chem. Eng. J., 181, 449
  3. Venkat, 2013, Kinetic and equilibrium studies on the removal of Congo red from aqueous solution using Eucalyptus wood (Eucalyptus globulus) saw dust, J. Taiwan Inst. Chem. Eng., 44, 81, 10.1016/j.jtice.2012.09.013 · DOI
  4. Enamul, 2011, Adsorptive removal of methyl orange and methylene blue from aqueous solution with a metal-organic framework material, iron terephthalate (MOF-235), J. Hazard. Mater., 185, 507, 10.1016/j.jhazmat.2010.09.035 · DOI
  5. Karagozoglu, 2007, The adsorption of basic dye (Astrazon Blue FGRL) from aqueous solutions onto sepiolite, fly ash and apricot shell activated carbon: Kinetic and equilibrium studies, J. Hazard. Mater., 147, 297, 10.1016/j.jhazmat.2007.01.003 · DOI
  6. Ming, 2006, Competitive adsorption of dye metanil yellow and RB15 in acid solutions on chemically cross-linked chitosan beads, Chemosphere, 62, 731, 10.1016/j.chemosphere.2005.04.068 · DOI
  7. Saleh, 2015, Mercury sorption by silica/carbon nanotubes and silica/activated carbon: A comparison study, J. Water Supply Res. Technol. AQUA, 64, 892, 10.2166/aqua.2015.050 · DOI
  8. Saleh, 2016, Nanocomposite of carbon nanotubes/silica nanoparticles and their use for adsorption of Pb(II): From surface properties to sorption mechanism, Desalin. Water Treat., 57, 10730, 10.1080/19443994.2015.1036784 · DOI
  9. Pagga, 1986, The degradation of dyestuffs: Part II Behaviour of dyestuffs in aerobic biodegradation tests, Chemosphere, 15, 479, 10.1016/0045-6535(86)90542-4 · DOI
  10. Culp, 2002, The revolution in corporate risk management: A decade of innovations in process and products, J. Appl. Corp. Financ., 14, 8, 10.1111/j.1745-6622.2002.tb00445.x · DOI
  11. Megahed, A., Aldridge, B., and Lowe, J. (2019). Comparative study on the efficacy of sodium hypochlorite, aqueous ozone, and peracetic acid in the elimination of Salmonella from cattle manure contaminated various surfaces supported by Bayesian analysis. PLoS ONE, 14. · DOI
  12. Vlyssides, 1999, Electrochemical treatment in relation to ph of domestic wastewater using ti/pt electrodes, J. Hazard. Mater., 95, 215, 10.1016/S0304-3894(02)00143-7 · DOI
  13. 1998, Electrochemical degradation of organic substances at bO2 anodes: Monitoring by continuous CO2 measurements, Water Res., 32, 2835, 10.1016/S0043-1354(98)00046-3 · DOI
  14. Comninellis, 1993, Electrochemical oxidation of phenol for wastewater treatment using SnO2 anodes, J. Appl. Electrochem., 23, 108, 10.1007/BF00246946 · DOI
  15. Gandini, 2000, Oxidation of carboxylic acids at boron-doped diamond electrodes for wastewater treatment, J. Appl. Electrochem., 30, 1345, 10.1023/A:1026526729357 · DOI
  16. Singh, 2016, Comparative study of electrochemical oxidation for dye degradation: Parametric optimization and mechanism identification, J. Environ. Chem. Eng., 4, 2911, 10.1016/j.jece.2016.05.036 · DOI
  17. Do, 1994, Decolorization of dye-containing solutions by electrocoagulation, J. Appl. Electrochem., 24, 785, 10.1007/BF00578095 · DOI
  18. Brillas, 1995, Electrochemical destruction of aniline and 4-chloroaniline for wastewater treatment using a carbon-PTFE O2 - Fed Cathode, J. Electrochem. Soc., 142, 1733, 10.1149/1.2044186 · DOI
  19. Jabli, 2017, Almond shell waste (Prunus dulcis): Functionalization with [dimethy-diallyl-ammonium-chloride-diallylamin-co-polymer] and chitosan polymer and its investigation in dye adsorption, J. Mol. Liq., 240, 35, 10.1016/j.molliq.2017.05.041 · DOI
  20. Sebeia, 2019, Production of cellulose from Aegagropila Linnaei macro-algae: Chemical modification, characterization and application for the bio-sorption of cationic and anionic dyes from water, Int. J. Biol. Macromol., 135, 152, 10.1016/j.ijbiomac.2019.05.128 · DOI
  21. Sebeia, 2019, Populus tremula, Nerium oleander and Pergularia tomentosa seed fibers as sources of cellulose and lignin for the bio-sorption of methylene blue, Int. J. Biol. Macromol., 121, 655, 10.1016/j.ijbiomac.2018.10.070 · DOI
  22. Sharma, 2019, Diesel soot coated non-woven fabric for oil-water separation and adsorption applications, Sci. Rep., 9, 8503, 10.1038/s41598-019-44920-x · DOI
  23. Ren, 2018, Polypropylene nonwoven fabric@poly(ionic liquid)s for switchable oil/water separation, dye absorption, and antibacterial applications, ChemSusChem, 11, 1092, 10.1002/cssc.201702320 · DOI
  24. Haji, 2013, Plasma activation and acrylic acid grafting on polypropylene nonwoven surface for the removal of cationic dye from aqueous media, Desalin. Water Treat., 53, 3632, 10.1080/19443994.2013.873350 · DOI
  25. Chen, 2018, Robust, hydrophilic graphene/cellulose nanocrystal fiber-based electrode with high capacitive performance and conductivity, Carbon, 127, 218, 10.1016/j.carbon.2017.11.012 · DOI
  26. Missoum, 2013, Nanofibrillated cellulose surface modification: A review, Materials, 6, 1745, 10.3390/ma6051745 · DOI
  27. Ammar, 2014, New polymer based modified cyclodextrins grafted to textile fibers; characterization and application to cotton wound dressings, Int. J. Appl. Res. Text., 2, 11
  28. Liu, W., Fei, M.-E., Ban, Y., Jia, A., and Qiu, R. (2017). Preparation and evaluation of green composites from microcrystalline cellulose and a soybean-oil derivative. Polymer, 9. · DOI
  29. Salah, 2017, Effect of the deacetylation degree on the antibacterial and antibiofilm activity of acemannan from Aloe vera, Ind. Crop. Prod., 103, 13, 10.1016/j.indcrop.2017.03.031 · DOI
  30. Salah, 2017, Synthesis and study of drug delivery system obtained via β-cyclodextrin functionalization of viscose/polyester dressings, J. Ind. Text., 47, 489, 10.1177/1528083716652833 · DOI
  31. Subramani, 2017, Isotherm, kinetic and thermodynamic studies on the adsorption behavior of textile dyes onto chitosan, Process. Saf. Environ. Prot., 106, 1, 10.1016/j.psep.2016.11.024 · DOI
  32. Deng, 2010, Layer-by-layer structured polysaccharides film-coated cellulose nanofibrous mats for cell culture, Carbohyd. Polym., 80, 474, 10.1016/j.carbpol.2009.12.004 · DOI
  33. Bhattarai, 2005, Electrospun chitosan-based nanofibers and their cellular compatibility, Biomaterial, 26, 6176, 10.1016/j.biomaterials.2005.03.027 · DOI
  34. El-Ghoul, Y. (2020). Biological and microbiological performance of new polymer-based chitosan and synthesized aminocyclodextrin finished polypropylene abdominal wall prosthesis biomaterial. Text. Res. J. · DOI
  35. Alminderej, M.F., and El-Ghoul, Y. (2019). Synthesis and study of a new biopolymer-based chitosan/hematoxylin grafted to cotton wound dressings. J. Appl. Polym. Sci., 136. · DOI
  36. Alminderej, 2020, Study of new cellulosic dressing with enhanced antibacterial performance grafted with a biopolymer of chitosan and myrrh polysaccharide extract, Arab. J. Chem., 13, 3672, 10.1016/j.arabjc.2019.12.005 · DOI
  37. Salah, 2016, Bacteriological effects of functionalized cotton dressings, J. Text. Inst., 107, 171, 10.1080/00405000.2015.1019247 · DOI
  38. Salah, 2019, Development, characterization, and biological assessment of biocompatible cellulosic wound dressing grafted Aloe vera bioactive polysaccharide, Cellulous, 26, 4957, 10.1007/s10570-019-02419-8 · DOI
  39. El-Ghoul, Y., and Alminderej, F.M. (2020). Bioactive and superabsorbent cellulosic dressing grafted alginate and Carthamus tinctorius polysaccharide extract for the treatment of chronic wounds. Text. Res. J. · DOI
  40. Kaczmarek, 2016, Effect of side substituents on thermal stability of the modified chitosan and its nanocomposites with magnetite, J. Therm. Anal. Calorim., 124, 1267, 10.1007/s10973-016-5260-x · DOI
  41. Mucha, 2005, Thermal analysis of chitosan and its blends, Thermochim. Acta., 427, 69, 10.1016/j.tca.2004.08.014 · DOI
  42. Gonzalez, 2015, Development of a chitin/graphene oxide hybrid composite for the removal of pollutant dyes: Adsorption and desorption study, Chem. Eng. J., 280, 41, 10.1016/j.cej.2015.05.112 · DOI
  43. Haffad, H., Zbair, M., Anfar, Z., Ahsaine, H.A., Bouhlal, H., and Khallok, H. (2019). Removal of reactive red-198 dye using chitosan as an adsorbent: Optimization by Central composite design coupled with response surface methodology. Toxin Rev., 1–13. · DOI
  44. Gulnaz, 2011, Removal of reactive red 198 from aqueous solution by Potamogeton crispus, Chem. Eng. J., 174, 579, 10.1016/j.cej.2011.09.061 · DOI
  45. Demarchi, 2019, Adsorption of the dye Remazol Red 198 (RR198) by O-carboxymethylchitosan-N-lauryl/γ-Fe2O3 magnetic nanoparticles, Arab. J. Chem., 12, 3444, 10.1016/j.arabjc.2015.08.028 · DOI
  46. Bazrafshan, 2014, Decolorization of reactive red 198 by adsorption onto ZnCl 2 activated pistachio hull wastes, Int. J. Env. Health Eng., 3, 38
  47. Malakootian, 2015, Evaluating the efficacy of alumina/carbon nanotube hybrid adsorbents in removing Azo Reactive Red 198 and Blue 19 dyes from aqueous solutions, Process. Saf. Environ. Protect., 96, 125, 10.1016/j.psep.2015.05.002 · DOI
  48. Tayebi, 2016, Synthesis of polyaniline/Fe3O4 magnetic nanoparticles for removal of reactive red 198 from textile waste water: Kinetic, isotherm, and thermodynamic studies, Desalin. Water Treat., 57, 22551, 10.1080/19443994.2015.1133323 · DOI
  49. Elkady, 2011, Assessment of the adsorption kinetics, equilibrium and thermodynamic for the potential removal of reactive red dye using eggshell biocomposite beads, Desalination, 278, 412, 10.1016/j.desal.2011.05.063 · DOI
  50. Alimohammadi, 2016, Batch and column adsorption of reactive red 198 from textile industry effluent by microporous activated carbon developed from walnut shells, Waste Biomass Valorization, 7, 1255, 10.1007/s12649-016-9506-4 · DOI
  51. Toprak, 2012, Systematic approach for the optimal process conditions of Reactive Red 198 adsorption by pistachio nut shell using Taguchi method, Desalin. Water Treat., 48, 96, 10.1080/19443994.2012.698800 · DOI
  52. Dincer, 2007, Coal-based bottom ash (CBBA) waste material as adsorbent for removal of textile dyestuffs from aqueous solution, J. Hazard. Mater., 141, 529, 10.1016/j.jhazmat.2006.07.064 · DOI
  53. Yaneva, 2006, Comparative modeling ofmono- and dinitrophenols sorption on yellow bentonite from aqueous solutions, J. Colloid Interface Sci., 293, 303, 10.1016/j.jcis.2005.06.069 · DOI
  54. Jabli, 2017, Rapid interaction, in aqueous media, between anionic dyes and cellulosic Nerium oleander fibers modified with Ethylene-Diamine and Hydrazine, J. Mol. Liq., 242, 272, 10.1016/j.molliq.2017.07.018 · DOI
  55. Mazengarb, 2009, Studies on the diffusion of direct dyes in chitosan film, Prog. Chem. App. Chitin Derivat., 14, 25
  56. Gucek, 2005, Adsorption and kinetic studies of cationic and anionic dyes on pyrophyllite from aqueous solutions, J. Coll. Interf. Sci., 286, 53, 10.1016/j.jcis.2005.01.012 · DOI
  57. Ho, 1998, The kinetics of sorption of basic dyes from aqueous solution by sphagnum moss peat, Can. J. Chem. Eng., 76, 822, 10.1002/cjce.5450760419 · DOI
  58. Abdulhameed, A.S., Jawad, A.H., and Mohammad, A.T. (2019). Synthesis of chitosan-ethylene glycol diglycidyl ether/TiO2 nanoparticles for adsorption of reactive orange 16 dye using a response surface methodology approach. Bioresour. Technol., 293. · DOI
  59. Temkin, 1940, Kinetic of ammonia synthesis on promoted iron catalyst, Acta Physiochim., 12, 327
  60. Ngulube, 2018, Calcined magnesite as an adsorbent for cationic and anionic dyes: Characterization, adsorption parameters, isotherms and kinetics study, Heliyon, 4, 838, 10.1016/j.heliyon.2018.e00838 · DOI
  61. Aljeboree, 2017, Kinetics and equilibrium study for the adsorption of textile dyes on coconut shell activated carbon, Arab. J. Chem., 10, 3381, 10.1016/j.arabjc.2014.01.020 · DOI · Paper page

Metadata

Authors
EL-Ghoul, Y., Ammar, C., Alminderej, F. M., & Shafiquzzaman, M.
Venue
Polymers
Publisher
MDPI AG
Published
2021-01-20
Volume
13
Issue
3
Pages
322
ISSN
2073-4360
Cited by
23
References
1
Language
en
Funders
Qassim University (5656 -cos-2019-2-2-I)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review