The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Effects of Gamma Radiation on the Sterility Assurance, Antibacterial Ability, and Biocompatibility of Impregnated Hydrogel Macrosphere Protein and Drug Release
Open accessAbstract
Devices and medicines used in the medical field must be sterile. Gamma (γ)-irradiation is commonly used for sterilization because its high rate of penetration ensures uniform sterilization. To confirm that hydrogel macrosphere carriers inherit excellent liquid absorption with no cytotoxicity after γ-irradiation sterilization, investigating whether the physiochemical properties of hydrogel macrospheres differ before and after sterilization is essential. The present study evaluated the influence of the recommended 25-kGy γ-irradiation dose on the physicochemical characteristics and in vitro release of bovine serum albumin and vancomycin (an antibiotic medication) from alginate/gelatin with a w/w ratio of 1/4 crosslinking gel macrospheres. Gel macrosphere properties before and after sterilization were compared according to optical and scanning electron microscopy, infrared spectroscopy analysis, the amino residual crosslinking index, water absorption, degradation, sterility assurance, in vitro drug release, antibacterial ability, and cytotoxicity. The crosslinking index was almost unchanged; however, the γ-irradiation caused in situ hydrogel debonding and recrosslinking, which led to a decrease in the water absorption and increase in the degradation rate of the macrospheres after immersion. The release of gel macrospheres carrying vancomycin did not significantly affect antibacterial ability or biocompatibility after γ-irradiation. Accordingly, we conclude that γ-irradiation is suitable for macrospherical formulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Theoretically, the carbonyl groups that are randomly spread across edges and the basal planes of the graphene can also react with primary amine groups and form imines47.”
From Bioengineered liver crosslinked with nano-graphene oxide enables efficient liver regeneration via MMP suppression and immunomodulation (2023) · cites this paper as [47]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogel nanoparticles in drug delivery
Hamidi, M., Azadi, A., & Rafiei, P. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2008.08.002 · Cited by 2,067
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 2,009
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Hassan, C. M., & Peppas, N. A. (2007) · Advances in Polymer Science · doi:10.1007/3-540-46414-x_2 · Cited by 1,356
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.009 · Cited by 1,171
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Advances in crosslinking strategies of biomedical hydrogels
Hu, W., Wang, Z., Xiao, Y., Zhang, S., & Wang, J. (2019) · Biomaterials Science · doi:10.1039/c8bm01246f · Cited by 896
Self-citationMicroengineered hydrogels for tissue engineering
Khademhosseini, A., & Langer, R. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.021 · Cited by 830
Laftah, W. A., Hashim, S., & Ibrahim, A. N. (2011) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2011.593082 · Cited by 474
Chemical reactions of polymer crosslinking and post-crosslinking at room and medium temperature
Tillet, G., Boutevin, B., & Ameduri, B. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.08.003 · Cited by 472
Lozinsky, V. I., & Plieva, F. M. (1998) · Enzyme and Microbial Technology · doi:10.1016/s0141-0229(98)00036-2 · Cited by 386
Bioinspired Materials for Controlling Stem Cell Fate
Fisher, O. Z., Khademhosseini, A., Langer, R., & Peppas, N. A. (2010) · Accounts of Chemical Research · doi:10.1021/ar900226q · Cited by 315
Supramolecular hydrogels: synthesis, properties and their biomedical applications
Dong, R., Pang, Y., Su, Y., & Zhu, X. (2015) · Biomaterials Science · doi:10.1039/c4bm00448e · Cited by 302
New Biodegradable Thermogelling Copolymers Having Very Low Gelation Concentrations
Loh, X. J., Goh, S. H., & Li, J. (2007) · Biomacromolecules · doi:10.1021/bm0607933 · Cited by 262
Synthesis of antibacterial PVA/CM-chitosan blend hydrogels with electron beam irradiation
Zhao, L., Mitomo, H., Zhai, M., Yoshii, F., Nagasawa, N., & Kume, T. (2003) · Carbohydrate Polymers · doi:10.1016/s0144-8617(03)00103-6 · Cited by 240
Graft copolymerization onto starch. II. Grafting of acrylic acid and preparation of it's hydrogels
Athawale, V. D., & Lele, V. V. (1998) · Carbohydrate Polymers · doi:10.1016/s0144-8617(97)00138-0 · Cited by 240
Thermogels: In Situ Gelling Biomaterial
Liow, S. S., Dou, Q., Kai, D., Karim, A. A., Zhang, K., Xu, F., & Loh, X. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00515 · Cited by 237
Sterilization of hydrogels for biomedical applications: A review
Galante, R., Pinto, T. D. J. A., Colaço, R., & Serro, A. P. (2017) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34048 · Cited by 235
Synthesis and Characterization of Enzymatically-Cross-Linked Poly(ethylene glycol) Hydrogels
Sperinde, J. J., & Griffith, L. G. (1997) · Macromolecules · doi:10.1021/ma970345a · Cited by 216
Liu, Y., Vrana, N. E., Cahill, P. A., & McGuinness, G. B. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31310 · Cited by 210
Loh, X. J., Goh, S. H., & Li, J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.016 · Cited by 204
Tsuji, H., Horii, F., Nakagawa, M., Ikada, Y., Odani, H., & Kitamaru, R. (1992) · Macromolecules · doi:10.1021/ma00042a011 · Cited by 202
3D bioprinting of cell-laden electroconductive MXene nanocomposite bioinks
Rastin, H., Zhang, B., Mazinani, A., Hassan, K., Bi, J., Tùng, T. T., & Lošić, D. (2020) · Nanoscale · doi:10.1039/d0nr02581j · Cited by 171
3D Bioprinting of Methylcellulose/Gelatin-Methacryloyl (MC/GelMA) Bioink with High Shape Integrity
Rastin, H., Ormsby, R. T., Atkins, G. J., & Lošić, D. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00169 · Cited by 163
Hydrogel–silver nanoparticle composites: A new generation of antimicrobials
Varaprasad, K., Mohan, Y. M., Ravindra, S., Reddy, N. N., Vimala, K., Monika, K., Sreedhar, B., & Raju, K. M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31249 · Cited by 150
Said, H. M., Alla, S. G. A., & El‐Naggar, A. W. M. (2004) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2004.07.002 · Cited by 142
Biodegradable Thermogelling Polymers: Working Towards Clinical Applications
Dou, Q. Q., Liow, S. S., Ye, E., Lakshminarayanan, R., & Loh, X. J. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201300627 · Cited by 140
Hennink, W. E., de Jong, S. J., Bos, G. W., Veldhuis, T. F. J., & van Nostrum, C. F. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2003.02.002 · Cited by 134
Raghavendra, G. M., Varaprasad, K., & Jayaramudu, T. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-32889-0.00002-9 · Cited by 123
Xu, G., Wang, X., Deng, C., Teng, X., Suuronen, E. J., Shen, Z., & Zhong, Z. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.016 · Cited by 119
Superior hybrid hydrogels of polyacrylamide enhanced by bacterial cellulose nanofiber clusters
Yuan, N., Xu, L., Zhang, L., Ye, H., Zhao, J., Liu, Z., & Rong, J. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.04.074 · Cited by 119
Zhao, Q. S., Ji, Q. X., Xing, K., Li, X. Y., Liu, C., & Chen, X. G. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.11.020 · Cited by 115
Jaikumar, D., Sajesh, K. M., Soumya, S., Nimal, T. R., Chennazhi, K. P., Nair, S. V., & Jayakumar, R. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.12.037 · Cited by 114
3D bioprinted alginate-gelatin based scaffolds for soft tissue engineering
Chawla, D., Kaur, T., Joshi, A., & Singh, N. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.127 · Cited by 106
Araki, K., Yagi, N., Ikemoto, Y., Yagi, H., Choong, C., Hayakawa, H., Beck, G., Sumi, H., Fujimura, H., Moriwaki, T., et al. (2015) · Scientific Reports · doi:10.1038/srep17625 · Cited by 103
3D printing of cell-laden electroconductive bioinks for tissue engineering applications
Rastin, H., Zhang, B., Bi, J., Hassan, K., Tùng, T. T., & Lošić, D. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00627k · Cited by 100
Ebara, M., Kotsuchibashi, Y., Narain, R., Idota, N., Kim, Y., Hoffman, J. M., Uto, K., & Aoyagi, T. (2014) · NIMS monographs · doi:10.1007/978-4-431-54400-5 · Cited by 100
Recent advances in the design of injectable hydrogels for stem cell-based therapy
Liang, K., Bae, K. H., & Kurisawa, M. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00485h · Cited by 98
Hydrogels: Smart Materials for Drug Delivery
Vashist, A., & Ahmad, S. (2013) · Oriental Journal Of Chemistry · doi:10.13005/ojc/290303 · Cited by 82
Rajalekshmi, R., Shaji, A. K., Joseph, R., & Bhatt, A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.10.256 · Cited by 73
Preparation and Properties of CMC Gel
Takigami, M., Amada, H., Nagasawa, N., Yagi, T., Kasahara, T., Takigami, S., & Tamada, M. (2007) · Transactions of the Materials Research Society of Japan · doi:10.14723/tmrsj.32.713 · Cited by 68
Universal mechanism for breaking amide bonds by ionizing radiation
Johnson, P. S., Cook, P. L., Liu, X., Yang, W., Bai, Y., Abbott, N. L., & Himpsel, F. J. (2011) · The Journal of Chemical Physics · doi:10.1063/1.3613638 · Cited by 53
Kowalski, J. B., & Tallentire, A. (1999) · Radiation Physics and Chemistry · doi:10.1016/s0969-806x(98)00206-0 · Cited by 48
Schulze, J., Hendrikx, S., Schulz‐Siegmund, M., & Aigner, A. M. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.056 · Cited by 41
5‐Fluorouracil encapsulated magnetic nanohydrogels for drug‐delivery applications
Jayaramudu, T., Raghavendra, G. M., Varaprasad, K., Raju, K. M., Sadiku, E. R., & Kim, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43921 · Cited by 39
Varaprasad, K., Vimala, K., Ravindra, S., Reddy, N. N., & Raju, K. M. (2011) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2011.553872 · Cited by 38
Rad, E. R., Vahabi, H., Formela, K., Saeb, M. R., & Thomas, S. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4654 · Cited by 37
Perkasa, D. P., Erizal, E., Darmawan, D., & Rasyid, A. (2013) · Indonesian Journal of Chemistry · doi:10.22146/ijc.21322 · Cited by 33
Ko, C., Tien, Y., Wang, J., & Chen, W. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.06.019 · Cited by 26
Self-citationRadiation sterilization — evaluation of a new approach for substantiation of 25 kGy
Kowalski, J. B., Aoshuang, Y., & Tallentire, A. (2000) · Radiation Physics and Chemistry · doi:10.1016/s0969-806x(99)00354-0 · Cited by 24
Kowalski, J. B., Herring, C., Baryschpolec, L., Reger, J., Patel, J., Feeney, M., & Tallentire, A. (2002) · Radiation Physics and Chemistry · doi:10.1016/s0969-806x(01)00681-8 · Cited by 21
Cell Encapsulation in Polymeric Self-Assembled Hydrogels
Varaprasad, K., Vimala, K., Raghavendra, G. M., Jayaramudu, T., Sadiku, E. R., & Ramam, K. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-32889-0.00010-8 · Cited by 17
Tallawi, M., & Germann, N. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.127211 · Cited by 11
Ko, C., Wu, H., Lin, Y., Yang, C.-H., Chen, J., & Chen, W. (2017) · Bio-Medical Materials and Engineering · doi:10.3233/bme-171690 · Cited by 7
Self-citation
Research works printed but not linked: 2
- Peppas, N.A. (2010). Biomedical Applications of Hydrogels Handbook, Springer Science & Business Media.
- Lowman, A., and Peppas, N. (1999). Encyclopedia of Controlled Drug Delivery, John Wiley & Sons.
Cited by
A review of conventional and emerging technologies for hydrogels sterilization
Bento, C. S. A., Gaspar, M. C., Coimbra, P., de Sousa, H. C., & Braga, M. E. M. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.122671 · Cited by 144
Alginate-Based Materials Loaded with Nanoparticles in Wound Healing
Froelich, A., Jakubowska, E., Wojtyłko, M., Jadach, B., Gackowski, M., Gadziński, P., Napierała, O., Ravliv, Y., & Osmałek, T. Z. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15041142 · Cited by 118
Ahmed, M. S., Islam, M., Hasan, M. K., & Nam, K. (2024) · Gels · doi:10.3390/gels10060381 · Cited by 107
Bioinspired Hydrogels as Platforms for Life-Science Applications: Challenges and Opportunities
Bercea, M. (2022) · Polymers · doi:10.3390/polym14122365 · Cited by 78
Passornraprasit, N., Siripongpreda, T., Ninlapruk, S., Rodthongkum, N., & Potiyaraj, P. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.06.053 · Cited by 64
Metadata
- Authors
- Fu, P.-S., Wang, J.-C., Lai, P.-L., Liu, S.-M., Chen, Y.-S., Chen, W.-C., & Hung, C.-C.
- Affiliations
- Kaohsiung Medical University (TW)
- Kaohsiung Medical University Chung-Ho Memorial Hospital (TW)
- Feng Chia University (TW)
- Corresponding author
- Chen, Wen-Cheng
- Hung, Chun-Cheng
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-03-18
- Volume
- 13
- Issue
- 6
- Pages
- 938
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC8003089
- OpenAlex
- W3136826041
- Cited by
- 25
- References
- 54
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 3 · 2023: 8 · 2022: 5 · 2021: 2
- FWCI
- 1.43
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- the Southern Taiwan Science Park Bureau, Ministry of Science and Technology, Taiwan (107CB02)
- Kaohsiung Municipal Ta-Tung Hospital plan (kmtth-109-040)
- Ministry of Science and Technology, Taiwan (108-2745-8-035-003 -)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
- Keywords
- gamma irradiation sterilization, bovine serum albumin, vancomycin, in vitro drug release, antibacterial activity, biocompatibility, water absorption, hydrogel degradation, cytotoxicity, protein drug delivery
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.