The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Physical Properties of Thermoplastic Starch Derived from Natural Resources and Its Blends: A Review
Open accessAbstract
Thermoplastic starch composites have attracted significant attention due to the rise of environmental pollutions induced by the use of synthetic petroleum-based polymer materials. The degradation of traditional plastics requires an unusually long time, which may lead to high cost and secondary pollution. To solve these difficulties, more petroleum-based plastics should be substituted with sustainable bio-based plastics. Renewable and natural materials that are abundant in nature are potential candidates for a wide range of polymers, which can be used to replace their synthetic counterparts. This paper focuses on some aspects of biopolymers and their classes, providing a description of starch as a main component of biopolymers, composites, and potential applications of thermoplastics starch-based in packaging application. Currently, biopolymer composites blended with other components have exhibited several enhanced qualities. The same behavior is also observed when natural fibre is incorporated with biopolymers. However, it should be noted that the degree of compatibility between starch and other biopolymers extensively varies depending on the specific biopolymer. Although their efficacy is yet to reach the level of their fossil fuel counterparts, biopolymers have made a distinguishing mark, which will continue to inspire the creation of novel substances for many years to come.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Application of agro-waste for sustainable construction materials: A review
Madurwar, M. V., Ralegaonkar, R. V., & Mandavgane, S. A. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.011 · Cited by 584
Development of biodegradable starch-based foams incorporated with grape stalks for food packaging
Engel, J. B., Ambrosi, A., & Tessaro, I. C. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115234 · Cited by 169
Cited by
Innovations in applications and prospects of bioplastics and biopolymers: a review
Nanda, S., Patra, B. R., Patel, R., Bakos, J., & Dalai, A. K. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01334-4 · Cited by 478
Suriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., et al. (2021) · Polymers · doi:10.3390/polym13203514 · Cited by 285
Self-citationSurendren, A., Mohanty, A. K., Liu, Q., & Misra, M. (2022) · Green Chemistry · doi:10.1039/d2gc02169b · Cited by 275
Metadata
- Authors
- Diyana, Z. N., Jumaidin, R., Selamat, M. Z., Ghazali, I., Julmohammad, N., Huda, N., & Ilyas, R. A.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-04-26
- Volume
- 13
- Issue
- 9
- Pages
- 1396
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3159617499
- Cited by
- 243
- References
- 2
- FWCI
- 9.68
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.