3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)

Kafle, Abishek, Luis, Eric, Silwal, Raman, Pan, Houwen Matthew, Shrestha, Pratisthit Lal, Bastola, Anil Kumar·2021·Polymers
DOI 10.3390/polym13183101

Cites (227)

Items 201–227 of 227

  1. Economic assessment for additive manufacturing of automotive end-use parts through digital light processing (DLP)
    Mathias Wiese, Alexander Kwauka, Sebastian Thiede · 2021 · CIRP journal of manufacturing science and technology
  2. Selective Laser Sintering of Filled Polymer Systems: Bulk Properties and Laser Beam Material Interaction
    Katrin Wudy, Lydia Lanzl, Dietmar Drummer · 2016 · Physics Procedia
  3. A Critical Review for Synergic Kinetics and Strategies for Enhanced Photopolymerizations for 3D-Printing and Additive Manufacturing
    Jui‐Teng Lin, Jacques Lalevée, Da‐Chuan Cheng · 2021 · Polymers
  4. Sintering in Laser Sintering
    David L. Bourell · 2016 · JOM
  5. Experimental investigation and statistical modelling for assessing the tensile properties of FDM fabricated parts
    Nikolaos A. Fountas, Protesilaos K. Kostazos, H. Pavlidis · 2020 · Procedia Structural Integrity
  6. Phenomenological modelling of direct laser metal deposition for single tracks
    Marco Mazzarisi, Sabina Luisa Campanelli, Andrea Angelastro · 2020 · The International Journal of Advanced Manufacturing Technology
  7. Effects of manufacturing micro-structure on vibration of FFF 3D printing plates: Material characterisation, numerical analysis and experimental study
    Tianyun Yao, Huajiang Ouyang, Shi Dai · 2021 · Composite Structures
  8. From 3D models to FDM 3D prints: experimental study of chemical treatment to reduce stairs-stepping of semi-sphere profile
    Mohammad S. Alsoufi, Mohammed W. Alhazmi, Dhia Kadhm Suker · 2019 · AIMS Materials Science
  9. Rapid 3D Printing Magnetically Active Microstructures with High Solid Loading
    Guangbin Shao, Henry Oliver T. Ware, Longqiu Li · 2019 · Advanced Engineering Materials
  10. Investigations into Complete Liquefier Dynamics and Optimization of Process Parameters for Fused Deposition Modeling
    Ashutosh K. Pandey, Sharad Kumar Pradhan · 2018 · Materials Today Proceedings
  11. Experimental Investigation of SLS Process for Flexural Strength Improvement of PA-3200GF Parts
    Sushant Negi, Rajesh Kumar Sharma, Suresh Dhiman · 2014 · Materials and Manufacturing Processes
  12. Mechanical, thermal and melt flow of aluminum-reinforced PA6/ABS blend feedstock filament for fused deposition modeling
    Rupinder Singh, Ranvijay Kumar, Inderpreet Singh Ahuja · 2018 · Rapid Prototyping Journal
  13. Controlling magnetic properties of 3D-printed magnetic elastomer structures via fused deposition modeling
    Thomas M. Calascione, Nathan A. Fischer, Thomas J. Lee · 2021 · AIP Advances
  14. Influence of the molding angle on tensile properties of FDM parts with orthogonal layering
    Shijie Ding, Lingyu Kong, Jin Yan-juan · 2019 · Polymers for Advanced Technologies
  15. The Mechanical Properties of Photopolymer Prepared Via 3D Stereolithography Printing: The Effect of UV Curing Time and Anisotropy
    Khalid Haj Ahmad, Zurina Mohamad, Norhayani Othman · 2020 · Chemical engineering transactions
  16. Studies on thermal and viscoelastic properties of vinyl ester resin and its composites with glass fiber
    André C. Garay, Lucas Tosin Paese, Jeferson Ávila Souza · 2015 · Matéria (Rio de Janeiro)
  17. Preparation of Polypropylene Powder by Dissolution-Precipitation Method for Selective Laser Sintering
    Liang Fang, Yan Wang, Xu Yang · 2019 · Advances in Polymer Technology
  18. Advances in Materials Engineering and Manufacturing Processes
    2020 · Lecture notes on multidisciplinary industrial engineering
  19. Field-structured magnetic elastomers based on thermoplastic polyurethane for fused filament fabrication
    Eike Dohmen, Ali Raed Saloum, Johannes Abel · 2020 · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences
  20. Mini-Extruder for 3D Magnetoactive Polymer Printing
    Nina Prem, Dirk Sindersberger, Gareth John Monkman · 2019 · Advances in Materials Science and Engineering
  21. Assessment of the Dimensional and Geometric Precision of Micro-Details Produced by Material Jetting
    Miguel R. Silva, A.M. Pereira, Álvaro Miguel do Céu Gramaxo Olivei Sampaio · 2021 · Materials
  22. Analysis and Optimization of Warpage Deformation in 3D Printing Training Teaching -- Taking Jilin University Engineering Training Center as an example
    Dongni Geng, Jichang Zhao · 2019 · International Workshop on Education Reform and Social Sciences (ERSS)
  23. Flexural properties of selectively sintered polyamide and Alumide
    Liviu Marșavina, Dan Ioan Stoia · 2019 · Material Design & Processing Communications
  24. Study on the Structure and Properties of Novel Bio-based Polyamide56 Fiber Compared with Normal Polyamide Fibers
    Xinmin Hao, Xinmin Hao, Yafei Guo · 2015 · Advances in engineering research/Advances in Engineering Research
  25. Rough-cut fast numerical investigation of temperature fields in selective laser sintering/melting
    I. Konstantinou, George-Christopher Vosniakos · 2016 · The International Journal of Advanced Manufacturing Technology
  26. Design guidelines to mitigate distortion in material jetting specimens
    Kamran Kardel, Ali Khoshkhoo, Andres L. Carrano · 2021 · Rapid Prototyping Journal
  27. Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
    Maximilian A. Dechet, Lydia Lanzl, Werner, Yannick · 2019