The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review
Open accessAbstract
Additive manufacturing (AM) is a sustainable and innovative manufacturing technology to fabricate products with specific properties and complex shapes for additive manufacturable materials including polymers, steels, titanium, copper, ceramics, composites, etc. This technology can well facilitate consumer needs on products with complex geometry and shape, high strength and lightweight. It is sustainable with having a layer-by-layer manufacturing process contrary to the traditional material removal technology—subtractive manufacturing. However, there are still challenges on the AM technologies, which created barriers for their further applications in engineering fields. For example, materials properties including mechanical, electrical, and thermal properties of the additively manufactured products are greatly affected by using different ways of AM methods and it was found as the material anisotropy phenomenon. In this study, a detailed literature review is conducted to investigate research work conducted on the material anisotropy phenomenon of additively manufactured materials. Based on research findings on material anisotropy phenomenon reported in the literature, this review paper aims to understand the nature of this phenomenon, address main factors and parameters influencing its severity on thermal, electrical and mechanical properties of 3D printed parts, and also, explore potential methods to minimise or mitigate this unwanted anisotropy. The outcomes of this study would be able to shed a light on improving additive manufacturing technologies and material properties of additively manufactured materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
Self-citation
Cited by
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Metadata
- Authors
- Zohdi, N., & Yang, R. (.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-09-30
- Volume
- 13
- Issue
- 19
- Pages
- 3368
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3203733623
- Cited by
- 250
- References
- 2
- FWCI
- 7.77
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review. https://app.cochat.ai/papers/10.3390/polym13193368
- The paper
- Zohdi, N., & Yang, R. (. (2021). Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review. Polymers. https://doi.org/10.3390/polym13193368
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.