Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Physical properties of polymers handbook

Mark, J. (2007) · Springer eBooks · doi:10.1007/978-0-387-69002-5 · Cited by 1,670 · see citing works

The morphology of poly(aryl-ether-ether-ketone)

Blundell, D. J., & Osborn, B. N. (1983) · Polymer · doi:10.1016/0032-3861(83)90144-1 · Cited by 1,044 · see citing works

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 771 · see citing works

Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 608 · see citing works

Extrusion-based additive manufacturing of PEEK for biomedical applications

Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 411 · see citing works

Mechanical impact behavior of polyether–ether–ketone (PEEK)

Garcia‐Gonzalez, D., Rusinek, A., Jankowiak, T., & Árias, A. (2015) · Composite Structures · doi:10.1016/j.compstruct.2014.12.061 · Cited by 245 · see citing works

Crystallization behavior and morphological characterization of poly(ether ether ketone)

Jin, L., Ball, J., Bremner, T., & Sue, H. (2014) · Polymer · doi:10.1016/j.polymer.2014.08.045 · Cited by 140 · see citing works

Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing

Wu, W., Geng, P., Zhao, J., Zhang, Y., Rosen, D. W., & Zhang, H. B. (2014) · Materials Research Innovations · doi:10.1179/1432891714z.000000000898 · Cited by 123 · see citing works

Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer

Zalaznik, M., Kalin, M., & Novak, S. (2015) · Tribology International · doi:10.1016/j.triboint.2015.08.016 · Cited by 113 · see citing works

Processing poly(ether etherketone) an a 3D printer for thermoplastic modelling

Valentan, B., Kadivnik, Ž., Brajlih, T., Anderson, A., & Drstvenšek, I. (2013) · University of Maribor digital library (University of Maribor) · Cited by 60 · see citing works

Evaluation of stiffness and strength in fused deposition sandwich specimens

Magalhães, L. C., Volpato, N., & Luersen, M. A. (2013) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-013-0111-1 · Cited by 52 · see citing works

Effects of the mold temperature on the mechanical properties and crystallinity of hydroxyapatite whisker‐reinforced polyetheretherketone scaffolds

Conrad, T. L., Jaekel, D. J., Kurtz, S. M., & Roeder, R. K. (2013) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32859 · Cited by 38 · see citing works

Recent Progress on Polymer Materials for Additive Manufacturing

Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 745 · see citing works

A critical review on the fused deposition modeling of thermoplastic polymer composites

Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 719 · see citing works

Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling

Caminero, M. Á., Chacón, J. M., García-Moreno, I., & Rodríguez, G. P. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.04.054 · Cited by 483 · see citing works

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462 · see citing works

Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites

Rahim, T. N. A. T., Abdullah, A. M., & Akil, H. M. (2019) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2019.1597883 · Cited by 458 · see citing works

Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling

Caminero, M. Á., Chacón, J. M., García-Moreno, I., & Reverte, J. M. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.04.038 · Cited by 422 · see citing works

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Wang, P., Zou, B., Ding, S., Li, L., & Huang, C. (2020) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.05.040 · Cited by 376 · see citing works

Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications

Arefin, A. M. E., Khatri, N. R., Kulkarni, N. N., & Egan, P. (2021) · Polymers · doi:10.3390/polym13091499 · Cited by 372 · see citing works

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

Han, X., Yang, D., Yang, C., Spintzyk, S., Scheideler, L., Li, P., Li, D., Geis‐Gerstorfer, J., & Rupp, F. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8020240 · Cited by 365 · see citing works

Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing

Bhandari, S., Lopez-Anido, R. A., & Gardner, D. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100922 · Cited by 362 · see citing works

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

Wang, P., Zou, B., Ding, S., Huang, C., Shi, Z., Ma, Y., & Yao, P. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108175 · Cited by 360 · see citing works

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

Ding, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351 · see citing works

Advances in 3D printing for polymer composites: A review

Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 325 · see citing works

Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament

Geng, P., Zhao, J., Wu, W., Ye, W., Wang, Y., Wang, S., & Zhang, S. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.11.023 · Cited by 321 · see citing works

Performance of biocompatible PEEK processed by fused deposition additive manufacturing

Arif, M. F., Kumar, S., Varadarajan, K. M., & Cantwell, W. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.015 · Cited by 296 · see citing works

3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties

Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.032 · Cited by 293 · see citing works

Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)

Benwood, C., Anstey, A., Andrzejewski, J., Misra, M., & Mohanty, A. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b00129 · Cited by 268 · see citing works

Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling

Deng, X., Zeng, Z. P., Peng, B., Yan, S., & Ke, W. (2018) · Materials · doi:10.3390/ma11020216 · Cited by 263 · see citing works

Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review

Zohdi, N., & Yang, C. (2021) · Polymers · doi:10.3390/polym13193368 · Cited by 261 · see citing works

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

Arif, M. F., Alhashmi, H., Varadarajan, K. M., Koo, J. H., Hart, A. J., & Kumar, S. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107625 · Cited by 245 · see citing works

Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers

Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101218 · Cited by 242 · see citing works

Fused filament fabrication of peek: A review of process-structure-property relationships

Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240 · see citing works

Semi-crystalline feedstock for filament-based 3D printing of polymers

Vaes, D., & Puyvelde, P. V. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101411 · Cited by 235 · see citing works

A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

Shaukat, U., Rossegger, E., & Schlögl, S. (2022) · Polymers · doi:10.3390/polym14122449 · Cited by 233 · see citing works

3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties

Coppola, B., Cappetti, N., Maio, L. D., Scarfato, P., & Incarnato, L. (2018) · Materials · doi:10.3390/ma11101947 · Cited by 230 · see citing works

3D printing of polyether-ether-ketone for biomedical applications

Singh, S., Prakash, C., & Ramakrishna, S. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.035 · Cited by 222 · see citing works

Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts

Valvez, S., Silva, A. P., & Reis, P. N. B. (2022) · Polymers · doi:10.3390/polym14132564 · Cited by 220 · see citing works

Crystallinity studies of PEKK and carbon fibre/PEKK composites: A review

Pérez-Martín, H., Mackenzie, P., Baidak, A., Ó Brádaigh, C. M., & Ray, D. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109127 · Cited by 212 · see citing works

Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review

Verma, S., Sharma, N., Kango, S., & Sharma, S. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110295 · Cited by 211 · see citing works

Characterization of 3D-printed PLA parts with different raster orientations and printing speeds

Khosravani, M. R., Berto, F., Ayatollahi, M. R., & Reinicke, T. (2022) · Scientific Reports · doi:10.1038/s41598-022-05005-4 · Cited by 209 · see citing works

A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures

Liu, S., Li, Y., & Li, N. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.007 · Cited by 207 · see citing works

Influence of PLA Filament Conditions on Characteristics of FDM Parts

Puerta, A. P. V., Batista, M., Salguero, J., & Girot, F. A. (2018) · Materials · doi:10.3390/ma11081322 · Cited by 198 · see citing works

Nozzle condition monitoring in 3D printing

Tlegenov, Y., Hong, G. S., & Lu, W. F. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2018.05.010 · Cited by 195 · see citing works

Polyether ether ketone (PEEK) and its 3D printed implants applications in medical field: An overview

Haleem, A., & Javaid, M. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2019.01.003 · Cited by 190 · see citing works

Effect of 3D printing process parameters on surface and mechanical properties of FFF-printed PEEK

Pulipaka, A., Gide, K. M., Beheshti, A., & Bagheri, Z. S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.11.057 · Cited by 184 · see citing works

The thermal properties of FDM printed polymeric materials: A review

Shanmugam, V., Babu, K., Kannan, G., Mensah, R. A., Samantaray, S. K., & Das, O. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110902 · Cited by 180 · see citing works

Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments

Harris, M., Potgieter, J., Archer, R. H., & Arif, K. M. (2019) · Materials · doi:10.3390/ma12101664 · Cited by 178 · see citing works

3D printing: An appealing route for customized drug delivery systems

ElKasabgy, N. A., Mahmoud, A. A. K., & Maged, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119732 · Cited by 177 · see citing works

Screw extrusion-based additive manufacturing of PEEK

Tseng, J.-W., Liu, C.-Y., Yen, Y.-K., Belkner, J., Bremicker, T., Liu, B. H., Sun, T.-J., & Wang, A.-B. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.032 · Cited by 175 · see citing works

Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling

Magri, A. E., Mabrouk, K. E., Vaudreuil, S., & Touhami, M. E. (2019) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719847244 · Cited by 170 · see citing works

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

Magri, A. E., Mabrouk, K. E., Vaudreuil, S., Chibane, H., & Touhami, M. E. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49087 · Cited by 170 · see citing works

Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling

Ceretti, D. V. A., Edeleva, M., Cardon, L., & D’hooge, D. (2023) · Molecules · doi:10.3390/molecules28052344 · Cited by 169 · see citing works

Investigating the Effects of Annealing on the Mechanical Properties of FFF-Printed Thermoplastics

Butt, J., & Bhaskar, R. (2020) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp4020038 · Cited by 164 · see citing works

Additive Manufacturing Post-Processing Treatments, a Review with Emphasis on Mechanical Characteristics

Diniță, A., Neacșa, A., Portoacă, A. I., Tănase, M., Ilinca, C. N., & RAMADAN, I. N. (2023) · Materials · doi:10.3390/ma16134610 · Cited by 161 · see citing works

Recent advances and challenges in materials for 3D bioprinting

Mao, H., Yang, L., Zhu, H., Wu, L., Ji, P., Yang, J., & Gu, Z. (2020) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2020.09.015 · Cited by 159 · see citing works

Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

Li, Q., Zhao, W. G., Li, Y., Yang, W., & Wang, G. (2019) · Polymers · doi:10.3390/polym11040656 · Cited by 156 · see citing works

Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites

Yang, D., Cao, Y., Zhang, Z., Yin, Y., & Li, D. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107149 · Cited by 155 · see citing works

Modification of polyetheretherketone implants: From enhancing bone integration to enabling multi-modal therapeutics

He, M., Huang, Y. X., Xu, H., Feng, G., Liu, L., Li, Y., Sun, D., & Zhang, L. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.05.009 · Cited by 152 · see citing works

Mechanical characterization of biocompatible PEEK by FDM

Zhao, Y., Zhao, K., Li, Y., & Chen, F. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.063 · Cited by 146 · see citing works

3D printing of biodegradable polymers and their composites – Current state-of-the-art, properties, applications, and machine learning for potential future applications

Dananjaya, V., Chevali, V. S., Dear, J. P., Potluri, P., & Abeykoon, C. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101336 · Cited by 137 · see citing works

Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective

Peterson, A. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.030 · Cited by 134 · see citing works

Polyether ether ketone (PEEK) and its manufacturing of customised 3D printed dentistry parts using additive manufacturing

Haleem, A., & Javaid, M. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2019.03.001 · Cited by 132 · see citing works

Fabrication and properties of poly(vinyl alcohol)/β-tricalcium phosphate composite scaffolds via fused deposition modeling for bone tissue engineering

Chen, G., Chen, N., & Wang, Q. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.01.004 · Cited by 130 · see citing works

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

Hu, B., Duan, X., Xing, Z., Xu, Z., Du, C., Zhou, H., Chen, R., & Shan, B. (2019) · Mechanics of Materials · doi:10.1016/j.mechmat.2019.103139 · Cited by 128 · see citing works

Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK

Barba, D., Árias, A., & Garcia‐Gonzalez, D. (2019) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2019.08.021 · Cited by 128 · see citing works

Interlayer bonding strength of 3D printed PEEK specimens

Liaw, C., Tolbert, J. W., Chow, L. W., & Güvendiren, M. (2021) · Soft Matter · doi:10.1039/d1sm00417d · Cited by 128 · see citing works

Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?

Başgül, C., Yu, T., MacDonald, D. W., Siskey, R. L., Marcolongo, M. S., & Kurtz, S. M. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103455 · Cited by 123 · see citing works

Improvement of the layer-layer adhesion in FFF 3D printed PEEK/carbon fibre composites

Rodzeń, K., Harkin‐Jones, E., Wegrzyn, M., Sharma, P. K., & Zhigunov, A. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106532 · Cited by 122 · see citing works

Biomimetic Shape–Color Double‐Responsive 4D Printing

Wang, J., Wang, Z., Song, Z., Ren, L., Liu, Q., & Ren, L. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900293 · Cited by 121 · see citing works

Mechanical properties of fused filament fabricated PEEK for biomedical applications depending on additive manufacturing parameters

Wang, Y., Müller, W., Rumjahn, A., Schmidt, F., & Schwitalla, A. D. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.104250 · Cited by 120 · see citing works

A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures

Sikder, P., Challa, B. T., & Gummadi, S. K. (2022) · Materialia · doi:10.1016/j.mtla.2022.101427 · Cited by 118 · see citing works

Modeling of surface roughness based on heat transfer considering diffusion among deposition filaments for FDM 3D printing heat-resistant resin

Wang, P., Zou, B., & Ding, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114064 · Cited by 116 · see citing works

Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties

Geng, P., Zhao, J. X., Wu, W., Wang, Y., Wang, B., Wang, S., & Li, G. (2018) · Polymers · doi:10.3390/polym10080875 · Cited by 109 · see citing works

Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment

Chalgham, A., Ehrmann, A., & Wickenkamp, I. (2021) · Polymers · doi:10.3390/polym13081239 · Cited by 109 · see citing works

An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts

Magri, A. E., Vanaei, S., & Vaudreuil, S. (2021) · High Performance Polymers · doi:10.1177/09540083211009961 · Cited by 106 · see citing works

Additively-manufactured PEEK/HA porous scaffolds with highly-controllable mechanical properties and excellent biocompatibility

Zheng, J., Zhao, H., Dong, E., Kang, J., Liu, C., Sun, C., Li, D., & Wang, L. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112333 · Cited by 106 · see citing works

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants

Han, X., Sharma, N., Xu, Z., Scheideler, L., Geis‐Gerstorfer, J., Rupp, F., Thieringer, F. M., & Spintzyk, S. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8060771 · Cited by 105 · see citing works

Engineered 3D Polymer and Hydrogel Microenvironments for Cell Culture Applications

Fan, D., Staufer, U., & Accardo, A. (2019) · Bioengineering · doi:10.3390/bioengineering6040113 · Cited by 104 · see citing works

Impact of nanosilica on the friction and wear of a PEEK/CF composite coating manufactured by fused deposition modeling (FDM)

Lin, L., Ecke, N., Huang, M., Pei, X., & Schlarb, A. K. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107428 · Cited by 103 · see citing works

Recent developments in improving the fracture toughness of 3D-printed fiber-reinforced polymer composites

Khan, T., Ali, M., Riaz, Z., Butt, H., Al‐Rub, R. K. A., Dong, Y., & Umer, R. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111622 · Cited by 102 · see citing works

Investigating the hot isostatic pressing of an additively manufactured continuous carbon fiber reinforced PEEK composite

van de Werken, N., Koirala, P., Ghorbani, J., Doyle, D., & Tehrani, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101634 · Cited by 99 · see citing works

Additive manufacturing of polyetheretherketone and its composites: A review

Francis, J. N., Banerjee, I., Chugh, A., & Singh, J. (2022) · Polymer Composites · doi:10.1002/pc.26961 · Cited by 99 · see citing works

Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing

Chen, P., Wang, H., Su, J. D., Tian, Y., Wen, S., Su, B., Cao, Y., Chen, B., Zhou, K., Yan, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200750 · Cited by 98 · see citing works

Custom design and biomechanical analysis of 3D-printed PEEK rib prostheses

Kang, J., Wang, L., Wang, L., Wang, L., Cao, Y. Q., He, J., & Li, D. (2018) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-018-1015-x · Cited by 96 · see citing works

Influence of Fused Deposition Modelling Nozzle Temperature on the Rheology and Mechanical Properties of 3D Printed β-Tricalcium Phosphate (TCP)/Polylactic Acid (PLA) Composite

Elhattab, K., Bhaduri, S. B., & Sikder, P. (2022) · Polymers · doi:10.3390/polym14061222 · Cited by 93 · see citing works

Parameters Influencing the Outcome of Additive Manufacturing of Tiny Medical Devices Based on PEEK

Wang, Y., Müller, W., Rumjahn, A., & Schwitalla, A. D. (2020) · Materials · doi:10.3390/ma13020466 · Cited by 92 · see citing works

Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization

Abderrafai, Y., Mahdavi, M. H., Sosa-Rey, F., Hérard, C., Navas, I. O., Piccirelli, N., Lévesque, M., & Therriault, D. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110358 · Cited by 89 · see citing works

3D printed antibacterial silver nanowire/polylactide nanocomposites

Bayraktar, I., Doğanay, D., Coşkun, Ş., Kaynak, C., Akca, G., & Ünalan, H. E. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.05.059 · Cited by 88 · see citing works

Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review

Bakır, A. A., Atik, R., & Özerinç, S. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2020-0061 · Cited by 88 · see citing works

Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties

de Voorde, B. V., Katalagarianakis, A., Huysman, S., Toncheva, A., Raquez, J., Ðuretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Hemelrijck, D. V., et al. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102518 · Cited by 88 · see citing works

Experimental Design of Sustainable 3D-Printed Poly(Lactic Acid)/Biobased Poly(Butylene Succinate) Blends via Fused Deposition Modeling

Qahtani, M., Wu, F., Misra, M., Gregori, S., Mielewski, D. F., & Mohanty, A. K. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01830 · Cited by 87 · see citing works

Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering

Magri, A. E., Bencaid, S.-E., Vanaei, H. R., & Vaudreuil, S. (2022) · Polymers · doi:10.3390/polym14173674 · Cited by 87 · see citing works

Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications

Zhao, F., Li, D., & Jin, Z. M. (2018) · Materials · doi:10.3390/ma11020288 · Cited by 86 · see citing works

Additive manufacturing of continuous carbon fiber reinforced poly-ether-ether-ketone with ultrahigh mechanical properties

Chang, B., Li, X., Parandoush, P., Ruan, S., Shen, C., & Lin, D. L. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106563 · Cited by 86 · see citing works

Effects of FDM parameters and annealing on the mechanical and tribological properties of PEEK

He, Y., Shen, M., Wang, Q., Wang, T., & Pei, X. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.116901 · Cited by 86 · see citing works

Advancements in 3D printing techniques for biomedical applications: a comprehensive review of materials consideration, post processing, applications, and challenges

Ali, F., Kalva, S. N., & Koç‬, M. (2024) · Discover Materials · doi:10.1007/s43939-024-00115-4 · Cited by 85 · see citing works

Controllable interlayer shear strength and crystallinity of PEEK components by laser-assisted material extrusion

Luo, M., Tian, X., Zhu, W., & Li, D. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.131 · Cited by 84 · see citing works

Influence of sanding and plasma treatment on shear bond strength of 3D-printed PEI, PEEK and PEEK/CF

Li, W., Sang, L., Jian, X., & Wang, J. (2020) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2020.102614 · Cited by 84 · see citing works

Challenges in the Technology Development for Additive Manufacturing in Space

Zocca, A., Wilbig, J., Waske, A., Günster, J., Widjaja, M. P., Neumann, C., Clozel, M., Meyer, A., Ding, J., Zhou, Z., et al. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100018 · Cited by 84 · see citing works

3D printed continuous carbon fiber reinforced thermoplastic composite sandwich structure with corrugated core for high stiffness/load capability

Um, H.-J., Lee, J.-S., Shin, J.-H., & Kim, H. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.115590 · Cited by 84 · see citing works

3D printing of acellular scaffolds for bone defect regeneration: A review

Ghorbani, F., Li, D., Ni, S., Zhou, Y., & Yu, B. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.100979 · Cited by 83 · see citing works

In situ Consolidation of Carbon Fiber PAEK via Laser-Assisted Automated Fiber Placement

Heathman, N., Koirala, P., Yap, T., Emami, A., & Tehrani, M. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110405 · Cited by 83 · see citing works

The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach

Rodzeń, K., Sharma, P. K., McIlhagger, A., Mokhtari, M., Dave, F., Tormey, D., Sherlock, R. J., Meenan, B. J., & Boyd, A. (2021) · Polymers · doi:10.3390/polym13040545 · Cited by 82 · see citing works

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

Wang, P., & Zou, B. (2022) · Coatings · doi:10.3390/coatings12060827 · Cited by 82 · see citing works

Additive manufacturing in the new space economy: Current achievements and future perspectives

Ghidini, T., Grasso, M., Gumpinger, J., Makaya, A., & Colosimo, B. M. (2023) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2023.100959 · Cited by 80 · see citing works

Advanced additive manufacturing in implant dentistry: 3D printing technologies, printable materials, current applications and future requirements

Alqutaibi, A. Y., Alghauli, M. A., Aljohani, M., & Zafar, M. S. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00356 · Cited by 80 · see citing works

Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications

Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109839 · Cited by 80 · see citing works

Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation

Jiang, C., Cheng, Y., Lin, H., Chang, Y.-L., Pasang, T., & Lee, S. (2022) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2021-0166 · Cited by 79 · see citing works

Effects of printing path and material components on mechanical properties of 3D-printed polyether-ether-ketone/hydroxyapatite composites

Zheng, J., Kang, J., Sun, C., Yang, C., Wang, L., & Li, D. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104475 · Cited by 77 · see citing works

Additive Manufacturing of Carbon Fiber-reinforced Composites: A Review

Hu, Y. L., Lin, Y., Yang, L., Wu, S., Tang, D., Yan, C., & Shi, Y. (2023) · Applied Composite Materials · doi:10.1007/s10443-023-10178-w · Cited by 76 · see citing works

Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

Qu, H., Zhang, W., Li, Z., Hou, L., Li, G., Fuh, J. Y. H., & Wu, W. (2022) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-022-00650-1 · Cited by 34 · see citing works

Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts

Zhen, H., Zhao, B., Quan, L., & Fu, J. (2023) · Polymers · doi:10.3390/polym15092209 · Cited by 68 · see citing works

Influence of Process Parameters of 3D Printed PEEK on Crystallinity and Mechanical Performances

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-28547-9_21

Evaluation of the influence of process parameters on crystallinity and tensile strength of 3D printed PEEK parts

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062231198784 · Cited by 2 · see citing works

Effect of printing parameters and heat treatment on the crystallinity of PEEK by fused filament fabrication

Sun, Q., Ma, J., Man, J., Ali, Z., Gao, C., Kamm, P. H., García‐Moreno, F., Tan, X., Yin, K., Eberl, C., et al. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.07.127 · Cited by 1 · see citing works