The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
A Review on Natural Fiber Reinforced Polymer Composites (NFRPC) for Sustainable Industrial Applications
Open accessAbstract
The depletion of petroleum-based resources and the adverse environmental problems, such as pollution, have stimulated considerable interest in the development of environmentally sustainable materials, which are composed of natural fiber–reinforced polymer composites. These materials could be tailored for a broad range of sustainable industrial applications with new surface functionalities. However, there are several challenges and drawbacks, such as composites processing production and fiber/matrix adhesion, that need to be addressed and overcome. This review could provide an overview of the technological challenges, processing techniques, characterization, properties, and potential applications of NFRPC for sustainable industrial applications. Interestingly, a roadmap for NFRPC to move into Industry 4.0 was highlighted in this review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,694
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
COVID-19 Pandemic Repercussions on the Use and Management of Plastics
Prata, J. C., Silva, A. L. P., Walker, T. R., Duarte, A. C., & Rocha-Santos, T. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c02178 · Cited by 999
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
A review on dynamic mechanical properties of natural fibre reinforced polymer composites
Saba, N., Jawaid, M., Alothman, O. Y., & Paridah, M. T. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.075 · Cited by 962
Cellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
Yao, F., Wu, Q., Lei, Y., Guo, W., & Xu, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.012 · Cited by 887
AL-Oqla, F. M., & Sapuan, S. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.050 · Cited by 782
Natural Fibre Composites and Their Applications: A Review
Peças, P., Carvalho, H., Salman, H., & Leite, M. (2018) · Journal of Composites Science · doi:10.3390/jcs2040066 · Cited by 750
Joseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Green composites: a review of material attributes and complementary applications
Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650
Natural fiber reinforced composites: Sustainable materials for emerging applications
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., Arshad, H., & Zaidi, A. A. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100263 · Cited by 600
Patrício Silva, A. L., Prata, J. C., Walker, T. R., Campos, D., Duarte, A. C., Soares, A. M. V. M., Barcelò, D., & Rocha-Santos, T. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.140565 · Cited by 585
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 503
Natural fiber–reinforced composites: A review on material, manufacturing, and machinability
Lotfi, A., Li, H., Dao, D. V., & Prusty, G. (2021) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719844546 · Cited by 499
Nurazzi, N. M., Asyraf, M. R. M., Fatimah Athiyah, S., Shazleen, S. S., Rafiqah, S. A., Harussani, M. M., Kamarudin, S. H., Razman, M. R., Rahmah, M., Zainudin, E. S., et al. (2021) · Polymers · doi:10.3390/polym13132170 · Cited by 462
Self-citationCarbon storage potential in natural fiber composites
Pervaiz, M., & Sain, M. M. (2003) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(02)00173-8 · Cited by 413
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
Komuraiah, A., Kumar, N. S., & Prasad, B. D. (2014) · Mechanics of Composite Materials · doi:10.1007/s11029-014-9422-2 · Cited by 399
Mechanical property evaluation of natural fiber coir composite
Harish, S., Michael, D. P., Bensely, A., Lal, D. M., & Rajadurai, A. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.001 · Cited by 395
Eco-friendly polymer composites for green packaging: Future vision and challenges
Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou-Kandil, A. I. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.05.048 · Cited by 381
Processing and mechanical property evaluation of banana fiber reinforced polymer composites
Ramesh, M., Atreya, T. S. A., Aswin, U. S., Eashwar, H., & Deepa, C. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.284 · Cited by 289
Physical Modification of Natural Fibers and Thermoplastic Films for Composites — A Review
Mukhopadhyay, S., & Fangueiro, R. (2009) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705708091860 · Cited by 286
Alkbir, M. F. M., Sapuan, S. M., Nuraini, A. A., & Ishak, M. R. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.01.098 · Cited by 284
Why are designers fascinated by flax and hemp fibre composites?
Pil, L., Bensadoun, F., Pariset, J., & Verpoest, I. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.11.004 · Cited by 282
Pothan, L. A., Thomas, S., & Groeninckx, G. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.09.001 · Cited by 257
Sarikaya, E., Çallioğlu, H., & Demirel, H. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.03.020 · Cited by 248
Potential Natural Fiber Polymeric Nanobiocomposites: A Review
Hasan, K. M. F., Horváth, P. G., & Alpár, T. (2020) · Polymers · doi:10.3390/polym12051072 · Cited by 244
Oyeoka, H. C., Ewulonu, C. M., Nwuzor, I. C., Obele, C. M., & Nwabanne, J. T. (2021) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2021.02.009 · Cited by 242
Natural Fiber Reinforced Composite Material for Product Design: A Short Review
Azman, M. A., Asyraf, M. R. M., Khalina, A., Petrů, M., Ruzaidi, C. M., Sapuan, S. M., Wan Nik, W. B., Ishak, M. R., Ilyas, R. A., & Suriani, M. J. (2021) · Polymers · doi:10.3390/polym13121917 · Cited by 233
Effect of MAPP as a Coupling Agent on the Performance of Jute–PP Composites
Mohanty, S., NAYAK, S. K., Verma, S. K., & Tripathy, S. S. (2004) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684404032868 · Cited by 222
Review on hygroscopic aging of cellulose fibres and their biocomposites
Mokhothu, T. H., & John, M. J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.06.027 · Cited by 212
Han, J., Lu, K., Yue, Y., Mei, C., Huang, C., Wu, Q., & Xu, X. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.004 · Cited by 212
Processing and valorization of cellulose, lignin and lignocellulose using ionic liquids
Xia, Z., Li, J., Zhang, J., Zhang, X., Zheng, X., & Zhang, J. (2020) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2020.04.001 · Cited by 203
Duflou, J. R., Deng, Y., Van Acker, K., & Dewulf, W. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.33 · Cited by 200
Akhtar, M. N., Sulong, A. B., Radzi, M. K. F. M., Ismail, N. N., Raza, M. R., Muhamad, N., & Khan, M. A. (2016) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2016.12.004 · Cited by 200
Azmin, S. N. H. M., Hayat, N. A. B. M., & Nor, M. S. M. (2020) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2020.10.003 · Cited by 192
Determination of mechanical properties of intra-layer abaca–jute–glass fiber reinforced composite
Ramnath, B. V., Manickavasagam, V. M., Elanchezhian, C., Krishna, C. V., Karthik, S., & Saravanan, K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.061 · Cited by 188
Zhang, Y., Qi, J., Zeng, W., Huang, Y., & Yang, X. (2020) · Food Chemistry · doi:10.1016/j.foodchem.2019.125873 · Cited by 187
Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17)
Marrot, L., Lefeuvre, A., Pontoire, B., Bourmaud, A., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.09.026 · Cited by 176
Melt rheological behaviour of short pineapple fibre reinforced low density polyethylene composites
George, J., Janardhan, R., Anand, J. S., Bhagawan, S. S., & Thomas, S. (1996) · Polymer · doi:10.1016/s0032-3861(96)00386-2 · Cited by 168
Dai, D., & Fan, M. (2014) · Elsevier eBooks · doi:10.1533/9780857099228.1.3 · Cited by 161
A Review on Antimicrobial Packaging from Biodegradable Polymer Composites
Kamarudin, S. H., Rayung, M., Abu, F., Ahmad, S., Fadil, F., Karim, A. A., Norizan, M. N., Sarifuddin, N., Desa, M. S. Z. M., Basri, M. S. M., et al. (2022) · Polymers · doi:10.3390/polym14010174 · Cited by 146
Self-citationAtiqah, A., Jawaid, M., Ishak, M. R., & Sapuan, S. M. (2017) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1325427 · Cited by 138
Mulinari, D. R., Voorwald, H. J. C., Cioffi, M. O. H., da Silva, M. L. C. P., & Luz, S. M. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.07.028 · Cited by 136
Jute Based Bio and Hybrid Composites and Their Applications
Ashraf, M. A., Zwawi, M., Mehran, M. T., Kanthasamy, R., & Bahadar, A. (2019) · Fibers · doi:10.3390/fib7090077 · Cited by 122
Radoor, S., Karayil, J., Rangappa, S. M., Siengchin, S., & Parameswaranpillai, J. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.27 · Cited by 121
Potential Use of Plant Fibres and their Composites for Biomedical Applications
Namvar, F., Jawaid, M., Tanir, P. M., Mohamad, R., Azizi, S., Khodavandi, A., Rahman, H. S., & Nayeri, M. D. (2014) · BioResources · doi:10.15376/biores.9.3 · Cited by 111
Ibrahim, M. I. J., Sapuan, S. M., Zainudin, E. S., & Zuhri, M. Y. M. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.10.045 · Cited by 109
Nadlene, R., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Yusriah, L. (2016) · Polymer Composites · doi:10.1002/pc.23927 · Cited by 107
Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure
Hänninen, T., Thygesen, A., Mehmood, S., Madsen, B., & Hughes, M. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.01.025 · Cited by 104
Plant fibre-reinforced polymers: where do we stand in terms of tensile properties?
Fortea-Verdejo, M., Bumbaris, E. K., Burgstaller, C., Bismarck, A., & Lee, K. (2017) · International Materials Reviews · doi:10.1080/09506608.2016.1271089 · Cited by 99
Varghese, S. A., Pulikkalparambil, H., Rangappa, S. M., Siengchin, S., & Parameswaranpillai, J. (2020) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2020.100538 · Cited by 99
Thermal degradation behaviour of natural fibres at thermoplastic composite processing temperatures
Thomason, J. L., & Fernández, J. L. R. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109594 · Cited by 89
Using alternative waste coir fibres as a reinforcement in cement-fibre composites
Kochova, K., Gauvin, F., Schollbach, K., & Brouwers, H. J. H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117121 · Cited by 85
Rizwan, M., Gilani, S. R., Durrani, A. I., & Naseem, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.155 · Cited by 83
Woven Kenaf/Kevlar Hybrid Yarn as potential fiber reinforced for anti-ballistic composite material
Jambari, S., Yahya, M. Y., Abdullah, M. R., & Jawaid, M. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-6950-0 · Cited by 75
Rahman, M. M., Afrin, S., Haque, P., Islam, M. M., Islam, M. S., & Gafur, M. A. (2014) · International Journal of Chemical Engineering · doi:10.1155/2014/842147 · Cited by 67
Pineapple crown delignification using low-cost ionic liquid based on ethanolamine and organic acids
de Miranda, R. D. C. M., Neta, J. L. V., Ferreira, L. F. R., Gomes, W. A., do Nascimento, C. S., Gomes, E. D. B., Mattedi, S., Soares, C. M. F., & Lima, Á. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.10.112 · Cited by 67
Cionita, T., Hadi, A. E., Siregar, J. P., Zalinawati, M., Hamdan, M. H. M., Oumer, A. N., Jaafar, J., Irawan, A. P., Rihayat, T., & Fitriyana, D. F. (2021) · Polymers · doi:10.3390/polym13172964 · Cited by 67
Cellulosic Grewia Optiva fibres: Towards chemistry, surface engineering and sustainable materials
Rana, A. K., Potluri, P., & Thakur, V. K. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106059 · Cited by 53
Ionic Liquid Platform for Spinning Composite Chitin–Poly(lactic acid) Fibers
Shamshina, J. L., Zavgorodnya, O., Bertón, P., Chhotaray, P. K., Choudhary, H., & Rogers, R. D. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01554 · Cited by 51
The energetic characterization of pineapple crown leaves
Braga, R. M., Queiroga, T. S., Calixto, G. Q., Almeida, H. N., Melo, D. M. D. A., Melo, M. A. F., Freitas, J. C. D. O., & Curbelo, F. (2015) · Environmental Science and Pollution Research · doi:10.1007/s11356-015-5082-6 · Cited by 50
Natural Fiber Reinforced Composites in the Context of Biodegradability: A Review
Santhosh Kumar, S., & Hiremath, S. S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.11418-3 · Cited by 47
Ren, B., Mizue, T., Koichi, G. O. D. A., et al. (2012) · Composite Structures · doi:10.1016/j.compstruct.2012.06.002 · Cited by 45
Nascimento, L. F. C., Louro, L. H. L., Monteiro, S. N., Gomes, A. V., Marçal, R. L. S. B., Júnior, É. P. L., & Margem, J. I. (2017) · Materials Research · doi:10.1590/1980-5373-mr-2016-0927 · Cited by 37
Unidirectional All-Cellulose Composites from Flax via Controlled Impregnation with Ionic Liquid
Chen, F., Sawada, D., Hummel, M., Sixta, H., & Budtova, T. (2020) · Polymers · doi:10.3390/polym12051010 · Cited by 33
Salwa, H. N., Sapuan, S. M., Mastura, M. T., & Zuhri, M. Y. M. (2020) · Applied Sciences · doi:10.3390/app10227951 · Cited by 33
Compatibilization of biocomposites based on sponge‐gourd natural fiber reinforced poly(lactic acid)
Rahem, Z., Mayouf, I., Guessoum, M., Delaite, C., Douibi, A., & Lallam, A. (2019) · Polymer Composites · doi:10.1002/pc.25338 · Cited by 29
Kamarudin, S. H., Abdullah, L. C., Aung, M. M., & Ratnam, C. T. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/368/1/012011 · Cited by 28
Self-citationEngineering the fibre – matrix interface in natural-fibre composites
Zafeiropoulos, N. E. (2008) · Elsevier eBooks · doi:10.1533/9781845694593.1.127 · Cited by 26
Basri, M. S. M., Mustapha, F. B., Mazlan, N., & Ishak, M. R. (2020) · Polymers · doi:10.3390/polym12112709 · Cited by 26
Kamarudin, S. H., Abdullah, L. C., Aung, M. M., & Ratnam, C. T. (2019) · BioResources · doi:10.15376/biores.14.4.9001-9020 · Cited by 21
Self-citationFurfural production from oil palm frond (OPF) under subcritical ethanol conditions
Mohamad, N., Abd-Talib, N., & Len, K. Y. T. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.01.256 · Cited by 18
Metadata
- Authors
- Kamarudin, S. H., Mohd Basri, M. S., Rayung, M., Abu, F., Ahmad, S., Norizan, M. N., Osman, S., Sarifuddin, N., Desa, M. S. Z. M., Abdullah, U. H., Mohamed Amin Tawakkal, I. S., & Abdullah, L. C.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-09-05
- Volume
- 14
- Issue
- 17
- Pages
- 3698
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4295007526
- Cited by
- 459
- References
- 79
- FWCI
- 23.30
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.