The DOI matches its Crossref record; 64 of the 65 references it cites were found in a registry or an index.
Design of a New Phthalocyanine-Based Ion-Imprinted Polymer for Selective Lithium Recovery from Desalination Plant Reverse Osmosis Waste
Open accessAbstract
In this study, a novel technique is introduced that involves the combination of an ion-imprinted polymer and solid-phase extraction to selectively adsorb lithium ions from reverse osmosis brine. In the process of synthesizing ion-imprinted polymers, phthalocyanine acrylate acted as the functional monomer responsible for lithium chelation. The structural and morphological characteristics of the molecularly imprinted polymers and non-imprinted polymers were assessed using Fourier transform infrared spectroscopy and scanning electron microscopy. The adsorption data for Li on an ion-imprinted polymer showed an excellent fit to the Langmuir isotherm, with a maximum adsorption capacity (Qm) of 3.2 mg·g−1. Comprehensive chemical analyses revealed a significant Li concentration with a higher value of 45.36 mg/L. Through the implementation of a central composite design approach, the adsorption and desorption procedures were systematically optimized by varying the pH, temperature, sorbent mass, and elution volume. This systematic approach allowed the identification of the most efficient operating conditions for extracting lithium from seawater reverse osmosis brine using ion-imprinted polymer–solid-phase extraction. The optimum operating conditions for the highest efficiency of adsorbing Li+ were determined to be a pH of 8.49 and a temperature of 45.5 °C. The efficiency of ion-imprinted polymer regeneration was evaluated through a cycle of the adsorption–desorption process, which resulted in Li recoveries of up to 80%. The recovery of Li from the spiked brine sample obtained from the desalination plant reverse osmosis waste through the ion-imprinted polymer ranged from 62.8% to 71.53%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Regeneration is achieved through a desorption process utilizing low acid concentration solutions, reducing operating costs compared to other IX methods and minimizing environmental impact by reducing chemical waste [59].”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [59]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Chemical modification creates active sites with strong lithium affinity, enabling highly selective separation even in brines with high levels of Na + and Ca + .”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [59]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“These polymers remain efficient even after multiple adsorption/desorption cycles.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [59]
The cited source says what the claim attributes to it.
In the citing paper
“IIPs, such as phthalocyanine-based polymers, selectively adsorb lithium from brines.”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [59]
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“In particular, some inorganic compounds used as adsorbents require special disposal procedures to prevent environmental contamination [59].”
From Pathways to Greener Primary Lithium Extraction for a Really Sustainable Energy Transition: Environmental Challenges and Pioneering Innovations (2024) · cites this paper as [59]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. II. LIQUIDS.1
Langmuir, I. (1917) · Journal of the American Chemical Society · doi:10.1021/ja02254a006 · Cited by 2,350 · cited 5×
“675 obtained for the Freundlich isotherm.”
MethodInfluentialSurveying macrocyclic chemistry: from flexible crown ethers to rigid cyclophanes
Liu, Z., Nalluri, S. K. M., & Stoddart, J. F. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00185a · Cited by 909 · cited 1×
“Several research studies have shown that the utilization of crown ethers as macrocyclic hosts can enhance the stability and selectivity of metal ions when compared to their open-chain counterparts [43,44].”
BackgroundMembrane-based technologies for lithium recovery from water lithium resources: A review
Li, X., Mo, Y., Qing, W., Shao, S., Tang, C. Y., & Li, J. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117317 · Cited by 756 · cited 1×
“Incorporating crown ethers into supported liquid membranes has been reported by certain researchers to achieve the selective transport of Li+ ions [51,52].”
BackgroundExtraction of lithium with functionalized lithium ion-sieves
Xu, X., Chen, Y., Wan, P., Gasem, K., Wang, K., He, T., Adidharma, H., & Fan, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.004 · Cited by 536 · cited 1×
“In recent studies, it has been revealed that the most cost-effective method for lithium recovery is utilizing technology that involves the sorption of lithium using inorganic molecular sieve ion-exchange sorbents [24,25].”
BackgroundElectrochemical Methods for Lithium Recovery: A Comprehensive and Critical Review
Battistel, A., Palagonia, M. S., Brogioli, D., La Mantia, F., & Trócoli, R. (2020) · Advanced Materials · doi:10.1002/adma.201905440 · Cited by 504 · cited 2×
“, [4] arene) have been shown to enhance the selectivity of IIPs for lithium ions [42].”
BackgroundYoon, J., Yang, H., Lee, B., & Yu, W. (2018) · Advanced Materials · doi:10.1002/adma.201704765 · Cited by 503
Nan, J., Han, D., & Zuo, X. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.134 · Cited by 463 · cited 1×
“Other separation processes include solvent extraction [19], precipitation, organic resins, polymeric sorbents, and membrane-dependent processes [20–23].”
BackgroundChitrakar, R., Kanoh, H., Miyai, Y., & Ooi, K. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000911h · Cited by 340 · cited 1×
“However, several challenges remain with the traditional methods for separating lithium ions, such as high energy consumption, inefficient separation, and weak selectivity [26,27].”
BackgroundRecent advances on ion-imprinted polymers
Branger, C., Meouche, W., & Margaillan, A. (2013) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2013.03.021 · Cited by 333 · cited 1×
“The removal of template ions results in increased roughness of the imprinted polymer surface [66].”
BackgroundIon-exchange membrane capacitive deionization: A new strategy for brackish water desalination
Li, H., & Zou, L. (2011) · Desalination · doi:10.1016/j.desal.2011.02.027 · Cited by 305
Research works printed but not linked: 16
- Taniguchi, 2016, Seawater Desalination for Potable Water Supply: A Review, J. Water Env. Technol., 14, 69
- Kim, 2015, A Review of Lithium-ion Battery Recycling Processes, J. Ind. Eng. Chem., 23, 1
- Hwang, 2015, A Review of the Extraction and Utilization of Lithium from Primary and Secondary Sources, J. Ind. Eng. Chem., 29, 1
- Hosseini, 2020, Lithium Recovery from Seawater by Electrospun Nanofibrous Adsorbent: A Review, Chem. Eng. J., 382, 123026
- Lee, 2005, Lithium Recovery from Seawater by Electrolysis, J. Power Sources, 146, 47
- (2023, September 18). Saudi Arabian desal plant recognized with Guinness World Record. Waterworld, 9 April 2021. Available online: https://www.waterworld.com/drinking-water/treatment/press-release/14201071/saudi-arabian-desal-plant-recognized-with-guinness-world-record.
- Burgos, 2020, Lithium Extraction from Seawater: A Review and Technical Assessment of Selected Adsorbents, Sep. Purif. Technol., 245, 116863
- Cui, 2017, Ion-imprinting Technology: Advances and Applications in Separation Science, TrAC Trends Analyt. Chem., 87, 63
- Ema, 2020, Recent Advances in Crown Ether-based Molecularly Imprinted Polymers, Polymers, 12, 2690
- Kumari, 2016, Molecularly Imprinted Polymers: A Cost-effective Alternative to Expensive Receptors for Biomimetic Sensing, Biosens. Bioelectron., 75, 328
- Zhang, 2018, Macrocyclic Crown Ethers: Synthesis, Functionalization, and Applications, Chem. Rev., 118, 10569
- Li, 2020, Development of Crown Ethers-Based Materials for Selective Separation and Extraction of Lithium, J. Ind. Eng. Chem., 82, 10
- Zhou, 2019, Recent Advances in Crown Ethers for Lithium Extraction from Salt Lakes, Sep. Purif. Technol., 226, 366
- Han, 2020, Determination of Lithium in High Salinity Samples by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), Spectrosc. Spect. Anal., 40, 1214
- Yang, 2019, Preparation and Evaluation of Li+ Ion-Imprinted Polymer by Emulsion Polymerization for Selective Separation and Recovery of Li+, Sep. Purif. Technol., 215, 449
- Yang, 2018, Synthesis and Characterization of Li+ Ion-Imprinted Polymers by Suspension Polymerization for Selective Separation and Recovery of Li+, Ind. Eng. Chem. Res., 57, 6356
Cited by
Ruberti, M. (2024) · Sustainability · doi:10.3390/su17010160 · Cited by 35
Applications of crown ether-based materials for enhancing lithium recovery from brines
Yin, X., Xu, P., & Wang, H. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.133093 · Cited by 30
Advances in ion-imprinted polymer technology for rare earth element separation: A review
Liang, B., Zhu, P., Gu, J., Zeng, X., Yuan, W., Hu, H., Huang, L., & Xiao, B. (2025) · Journal of Rare Earths · doi:10.1016/j.jre.2025.12.004 · Cited by 7
Cho, H., Ghoreishian, S. M., Lee, J. W., Choi, S. S., Huh, Y. S., & Ryu, T. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.133931 · Cited by 5
Muslim, D. S., Ghanoum, R., Mohammed, N. N., Diab, N. M. M., Hameed, A., Boyer, T. H., Perreault, F., & Ali, M. E. A. (2026) · Water Environment Research · doi:10.1002/wer.70342 · Cited by 2
Metadata
- Authors
- Jamoussi, B., Chakroun, R., Al-Mur, B. A., Halawani, R. F., Aloufi, F. A., Chaabani, A., & Aljohani, N. S.
- Affiliations
- King Abdulaziz University (SA)
- Department of Environment, Faculty of Environmental Sciences, King Abdulaziz University, Jeddah 21589, Saudi Arabia
- Corresponding author
- Jamoussi, Bassem
- ORCID
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2023-09-21
- Volume
- 15
- Issue
- 18
- Pages
- 3847
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC10537805
- OpenAlex
- W4386914354
- Cited by
- 14
- References
- 65
- Citations by year
- 2026: 9 · 2025: 4 · 2024: 1
- FWCI
- 1.38
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- King Abdulaziz University (G:344-155-1443)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Chemistry › Analytical Chemistry › Analytical chemistry methods development
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Keywords
- ion-imprinted polymer, lithium recovery, reverse osmosis brine, desalination wastewater, solid-phase extraction, selective adsorption, Langmuir isotherm, central composite design, pH and temperature optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of a New Phthalocyanine-Based Ion-Imprinted Polymer for Selective Lithium Recovery from Desalination Plant Reverse Osmosis Waste. https://app.cochat.ai/papers/10.3390/polym15183847
- The paper
- Jamoussi, B., Chakroun, R., Al-Mur, B. A., Halawani, R. F., Aloufi, F. A., Chaabani, A., & Aljohani, N. S. (2023). Design of a New Phthalocyanine-Based Ion-Imprinted Polymer for Selective Lithium Recovery from Desalination Plant Reverse Osmosis Waste. Polymers. https://doi.org/10.3390/polym15183847
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.