Advancing Plastic Recycling: Challenges and Opportunities in the Integration of 3D Printing and Distributed Recycling for a Circular Economy
Open accessThe DOI matches its Crossref record; 235 of the 236 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The concept of the circular economy has emerged as a promising solution to address the mounting concerns surrounding plastic waste and the urgent need for sustainable resource management. While conventional centralized recycling remains a common practice for plastic waste, centralized facilities may prove inadequate in handling the ever-increasing volumes of plastic waste generated globally. Consequently, exploring alternative recycling methods, such as distributed recycling by additive manufacturing, becomes paramount. This innovative approach encompasses actively involving communities in recycling practices and promotes a circular economy. This comprehensive review paper aims to explore the critical aspects necessary to realize the potential of distributed recycling by additive manufacturing. In this paper, our focus lies on proposing schemes that leverage existing literature to harness the potential of distributed recycling by additive manufacturing as an effective approach to plastic waste management. We explore the intricacies of the recycling process, optimize 3D printing parameters, address potential challenges, and evaluate the mechanical properties of recycled materials. Our investigation draws heavily from the literature of the last five years, as we conduct a thorough critical assessment of DRAM implementation and its influence on the properties of 3D printing structures. Through comprehensive analysis, we reveal the potential of recycled materials in delivering functional components, with insights into their performance, strengths, and weaknesses. This review serves as a comprehensive guide for those interested in embracing distributed recycling by additive manufacturing as a transformative approach to plastic recycling. By fostering community engagement, optimizing 3D printing processes, and incorporating suitable additives, it is possible to collectively contribute to a more sustainable future while combatting the plastic waste crisis. As progress is made, it becomes essential to further delve into the complexities of material behavior, recycling techniques, and the long-term durability of recycled 3D printed components. By addressing these challenges head-on, it is feasible to refine and advance distributed recycling by additive manufacturing as a viable pathway to minimize plastic waste, fostering a circular economy and cultivating a cleaner planet for generations to come.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Within this scenario, the use of various polymer combinations and the contamination by food, metal, paper, pigments, and ink complicates the recycling of polymers [51].”
From Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction (2025) · cites this paper as [51]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–236 of 236
Lessard, J., Habert, G., Tagnit‐Hamou, A., & Amor, B. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.1c03074 · Cited by 23 · cited 1×
“It begins with product design in which designers prioritize recyclability by using fewer complex parts and a [149]. economy specialized localized to sustainability support shift strategies, it is possible to reduce waste, conserve resources, mitigate the negative impacts of plastic production and…”
BackgroundVieh�ver, W. (2000) · European Environment · doi:10.1002/1099-0976(200011/12)10:6<277::aid-eet243>3.0.co;2-7 · Cited by 22 · cited 1×
“The remaining plastic production caters to intermediate lifespan products including electrical and electronic goods, furniture, vehicles, and agriculture [2,10,11].”
BackgroundPrinciples of Oxidative Degradation
Zweifel, H. (1998) · Springer eBooks · doi:10.1007/978-3-642-80305-5_1 · Cited by 21 · cited 1×
“This mechanical shear generates significant forces in regions where the polymeric chains are entangled, leading to chain scission [115].”
BackgroundZhao, Y., Mishra, P., Han, F., Liu, X., & Shen, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.031 · Cited by 20
Dong, X., Hu, D., Wang, H., Huang, Y., Long, S., Zhang, G., & Li, X. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108005 · Cited by 20 · cited 1×
“Proper sorting of plastics becomes a Moreover, 3D printing creation of customized and complex designs as well as minimizing material waste during production [168]. crucial step that greatly influences the success of 3D printing with recycled materials [171].”
BackgroundDesign and analysis of shredder machine for e - waste recycling using CATIA
Kumaran, P., Lakshminarayanan, N., Martin, A. V., George, R., & JoJo, J. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/993/1/012013 · Cited by 19
Evaluation of thermal drying for the recycling of flexible plastics
Berkane, I., Aracil, I., & Fullana, A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.05.054 · Cited by 19 · cited 1×
“Common methods for drying include air and vacuum drying at temperatures below the glass transition temperature [204].”
MethodHe, W., Yang, J., Chen, Y., Liu, P., Li, C., Xiong, M., Niu, X., & Li, X. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107510 · Cited by 16
Synyuk, O., Musiał, J., Злотенко, Б. М., & Kulik, T. (2020) · Polymers · doi:10.3390/polym12112725 · Cited by 15
3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive ManufacturingPreprint
Woern, A. L., & Pearce, J. M. (2018) · Preprints.org · doi:10.20944/preprints201811.0087.v1 · Cited by 15
Kang, G., Joung, C., Kim, H., Im, S.-W., Kang, S., Ji, W., & Park, Y. (2022) · Polymer Composites · doi:10.1002/pc.27063 · Cited by 14
Nur‐A‐Tomal, M. S., Pahlevani, F., Handoko, W., Cholake, S. T., & Sahajwalla, V. (2020) · Materials Today Sustainability · doi:10.1016/j.mtsust.2020.100056 · Cited by 13
Mnif, R., & Elleuch, R. (2015) · Matériaux & Techniques · doi:10.1051/mattech/2015056 · Cited by 12 · cited 1×
“One study investigated the reprocessability of high-density polyethylene (HDPE) blends through extrusion molding for multiple cycles [112].”
BackgroundTaufiq, M. J., Mustafa, Z., & Mansor, M. R. (2017) · JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES · doi:10.15282/jmes.11.4.2017.16.0282 · Cited by 11 · cited 1×
“For example, Taufiq et al. [111] conducted a study investigating the mechanical properties and morphology of a polymer blend derived from rejected disposable diapers.”
BackgroundSelecting chemicals for separation of ABS and HIPS in WEEE by froth flotation
Utimura, S. K., Chaves, A. P., Tenório, J. A. S., & Espinosa, D. C. R. (2019) · Polímeros · doi:10.1590/0104-1428.05718 · Cited by 11
Krause, R. M. (2021) · Journal of Environmental Policy & Planning · doi:10.1080/1523908x.2021.1881463 · Cited by 11 · cited 1×
“Governments and businesses are implementing policies and offering incentives to encourage the use of reusable alternatives to single-use plastics, fostering a shift towards sustainability [147,148].”
BackgroundPatra, N. R., & Negi, Y. S. (2022) · Polymer Engineering and Science · doi:10.1002/pen.26022 · Cited by 11
Reiter, M., Miron, V. M., Lämmermann, S., Freudenthaler, P. J., Jerabek, M., & Major, Z. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.08.528 · Cited by 11 · cited 1×
“However, achieving high-quality structures with 3D printing requires tuning process settings [28].”
BackgroundConfigurational mechanics of necking phenomena in engineering thermoplastics
Chudnovsky, A., & Preston, S. (2002) · Mechanics Research Communications · doi:10.1016/s0093-6413(02)00301-4 · Cited by 9 · cited 1×
“This point coincides with the macroscopic plastic yielding, characterized by localized narrowing and uneven deformation, leading to a concentrated area of strain [217].”
BackgroundRecycling Tetrafluoroethylene–Perfluoroalkyl Vinylether Copolymer (PFA) Using Extrusion Process
Romoaldo, C. H., Francisquetti, É. L., Simon, D. A., Ernzen, J. R., & Bischoff, E. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200458 · Cited by 8 · cited 1×
“Through the utilization of recycled plastic and injection molding, this approach has the potential to make a significant difference in waste reduction and promote a more sustainable environment [158].”
MethodGiri, J. P., Patil, A. P., & Prabhu, H. (2018) · Lecture notes in networks and systems · doi:10.1007/978-981-13-1217-5_83 · Cited by 8 · cited 1×
“Therefore, factors such as print speed, print orientation, sample size, layer dimensions and nozzle size might not have a direct impact on the fundamental material properties of the plastic being used in 3D printing [236–238].”
BackgroundDesign and Modeling of Shredding Machine for Recycling Plastic Waste
Jemy, A. N. Q., Octary, A. V., Saptaji, K., Septiani, T. D., Fauziyyah, S. M., Mohammad, R. N., & Djamari, D. W. (2021) · IEEE International Conference on Computing, Engineering and Design (ICCED) · doi:10.1109/icced53389.2021.9664847 · Cited by 7
von Freeden, J., Rodenwaldt, B., & Nebel, D. (2023) · SN Applied Sciences · doi:10.1007/s42452-023-05273-3 · Cited by 7
Pielichowski, K., Njuguna, J., & Majka, T. M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-823023-7.00015-0 · Cited by 7
Ambade, V. V., Rajurkar, S. W., & Awari, G. K. (2023) · AIP conference proceedings · doi:10.1063/5.0162925 · Cited by 7 · cited 1×
“Another factor that needs to be considered is the print orientation, which affects the object’s structural integrity and surface finish [210,211].”
BackgroundPlastics Sustainability: Prospective
Biron, M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-821539-5.00012-4 · Cited by 6
Thermo-mechanical, rheological, and chemical properties of recycled plastics
Takkalkar, P., Jatoi, A. S., Jadhav, A., Jadhav, H., & Nizamuddin, S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85789-5.00002-2 · Cited by 6 · cited 1×
“Numerous studies have investigated the effects of mechanical recycling on the physicochemical and microstructural characteristics of thermoplastics [31,223–227].”
BackgroundHoseini, H., Movahed, S. O., & Jourabchi, S. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02394-5 · Cited by 6
Assessment of Recycled PLA-Based Filament for 3D Printing
Patti, A., Acierno, S., Cicala, G., Zarrelli, M., & Acierno, D. (2021) · International Online Conference on Polymer Science (IOCPS) · doi:10.3390/iocps2021-11209 · Cited by 6 · cited 1×
“Additionally, factors such as print speed, layer height, and cooling settings can have a significant impact on printing quality and may contribute to failed prints [176], which will be discussed in Section 3.4.”
BackgroundInfluentialDimas, T., Peeters, J. R., Eggers, A., & Vanierschot, M. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.02.020 · Cited by 4
Phanthong, P., & Yao, S. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.108432 · Cited by 3
Myasoedova, V. V. (2021) · Polymer Science Series D · doi:10.1134/s1995421221030217 · Cited by 2
Recycled Clothes With Polypropylene-Nanoclay for Industrial Product via Injection Molding
Othman, M. H. D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.11138-5 · Cited by 2
Czarnecka‐Komorowska, D., & Kanciak, W. (2023) · EAI/Springer Innovations in Communication and Computing · doi:10.1007/978-3-031-22719-6_9 · Cited by 2
Thompson, N., & Weaver, J. M. (2022) · ScholarsArchive (Brigham Young University) · Cited by 2
Zainudin, S., Shuaib, N. A., Omar, N. W. Y., & Azmi, A. I. (2021) · International Journal of Modern Manufacturing Technologies · doi:10.54684/ijmmt.2021.13.2.149 · Cited by 1 · cited 1×
“Injection molding is a manufacturing method for producing a wide range of plastic products, including those made from recycled materials [155].”
Background
Research works printed but not linked: 10
- (2023, August 31). Wohlers Report 2016 Published: Additive Manufacturing Industry Surpassed $5.1 Billion—Wohlers Associates. Available online: https://wohlersassociates.com/press-releases/wohlers-report-2016-published-additive-manufacturing-industry/.
- Sanchez, F.A.C., Lanza, S., Boudaoud, H., Hoppe, S., and Camargo, M. (2022, November 30). Polymer Recycling and Additive Manufacturing in an Open Source Context: Optimization of Processes and Methods. Available online: https://www.researchgate.net/publication/318922042.
- Horodytska, O., Cabanes, A., and Fullana, A. (2019). Plastics in the Aquatic Environment-Part I: Current Status and Challenges, Springer International Publishing.
- Czarnecka-Komorowska, D., and Kanciak, W. (2023). EAI International Conference on Management of Manufacturing Systems, Springer International Publishing.
- Wong, J.H., Gan, M.J.H., Chua, B.L., Gakim, M., and Siambun, N.J. (2022). IOP Conference Series: Materials Science and Engineering, IOP Publishing.
- Mahule, 2021, Design and Fabrication of Low Cost Plastic Shredder, Int. J. Res. Eng. Sci. Manag., 4, 4
- Hekkert, M.P., and Worrell, E. (2023, February 23). Sustainable Agriculture View Project Regional Economic and Environmental Impacts of Wind Power Developments: A Case Study of a German Region View Project José Potting. Available online: https://www.researchgate.net/publication/319314335.
- Mejia, E.B., Al-Maqdi, S., Alkaabi, M., and Alhammadi, A. (2023, August 18). Upcycling of HDPE Waste using Additive Manufacturing: Feasibility and Challenges; Upcycling of HDPE Waste using Additive Manufacturing: Feasibility and Challenges. Available online: https://www.researchgate.net/publication/342221344_Upcycling_of_HDPE_Waste_using_Additive_Manufacturing_Feasibility_and_Challenges.
- Al Nabhani, D., Kassab, A., Habbal, O., Mohanty, P., Ayoub, G., and Pannier, C. (2023, January 14–16). Benchmarking the Tensile Properties of Polylactic Acid (PLA) Recycled Through Fused Granule Fabrication Additive Manufacturing. Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, USA.
- Giri, J., Patil, A., and Prabhu, H. (2018). Lecture Notes in Networks and Systems, Springer.
Cited by
Dhali, S. L., Parida, D., Kumar, B., & Bala, K. (2024) · Biotechnology for Sustainable Materials · doi:10.1186/s44316-024-00011-0 · Cited by 143
“Several mechanical and chemical plastic recycling strategies suggest that the recycled products are of substand-ard qualities which limits their usage at a large scale [130].”
BackgroundPotential of recycled PLA in 3D printing: A review
Hasan, M. R., Davies, I. J., Pramanik, A., John, M. B., & Biswas, W. K. (2024) · Sustainable Manufacturing and Service Economics · doi:10.1016/j.smse.2024.100020 · Cited by 145
Georgescu, L., Forțea, C., Antohi, V. M., Balsalobre‐Lorente, D., Zlati, M. L., & Bărbuță‐Mișu, N. (2025) · Environmental Sciences Europe · doi:10.1186/s12302-025-01119-4 · Cited by 127
Enache, A.-C., Grecu, I., & Samoilă, P. (2024) · Materials · doi:10.3390/ma17122991 · Cited by 95
Sheriff, S. S., Yusuf, A. A., Akiyode, O. O., Hallie, E. F., Odoma, S., Yambasu, R. A., Thompson-Williams, K., Asumana, C., Gono, S. Z., & Kamara, M. H. (2025) · Waste Management Bulletin · doi:10.1016/j.wmb.2025.100204 · Cited by 85
Metadata
- Authors
- Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., & Ayoub, G. Y.
- Affiliations
- University of Michigan–Dearborn (US)
- Department of Mechanical Engineering, University of Michigan-Dearborn, Dearborn, MI 48128, USA
- Corresponding author
- Ayoub, Georges Y.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2023-09-25
- Volume
- 15
- Issue
- 19
- Pages
- 3881
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC10575100
- OpenAlex
- W4387056394
- Cited by
- 141
- References
- 232
- Citations by year
- 2026: 44 · 2025: 58 · 2024: 29 · 2023: 10
- FWCI
- 2.70
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- plastic recycling, additive manufacturing, 3D printing, circular economy, plastic waste management, community-based recycling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.