Advancing Plastic Recycling: Challenges and Opportunities in the Integration of 3D Printing and Distributed Recycling for a Circular Economy
Open accessThe DOI matches its Crossref record; 235 of the 236 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The concept of the circular economy has emerged as a promising solution to address the mounting concerns surrounding plastic waste and the urgent need for sustainable resource management. While conventional centralized recycling remains a common practice for plastic waste, centralized facilities may prove inadequate in handling the ever-increasing volumes of plastic waste generated globally. Consequently, exploring alternative recycling methods, such as distributed recycling by additive manufacturing, becomes paramount. This innovative approach encompasses actively involving communities in recycling practices and promotes a circular economy. This comprehensive review paper aims to explore the critical aspects necessary to realize the potential of distributed recycling by additive manufacturing. In this paper, our focus lies on proposing schemes that leverage existing literature to harness the potential of distributed recycling by additive manufacturing as an effective approach to plastic waste management. We explore the intricacies of the recycling process, optimize 3D printing parameters, address potential challenges, and evaluate the mechanical properties of recycled materials. Our investigation draws heavily from the literature of the last five years, as we conduct a thorough critical assessment of DRAM implementation and its influence on the properties of 3D printing structures. Through comprehensive analysis, we reveal the potential of recycled materials in delivering functional components, with insights into their performance, strengths, and weaknesses. This review serves as a comprehensive guide for those interested in embracing distributed recycling by additive manufacturing as a transformative approach to plastic recycling. By fostering community engagement, optimizing 3D printing processes, and incorporating suitable additives, it is possible to collectively contribute to a more sustainable future while combatting the plastic waste crisis. As progress is made, it becomes essential to further delve into the complexities of material behavior, recycling techniques, and the long-term durability of recycled 3D printed components. By addressing these challenges head-on, it is feasible to refine and advance distributed recycling by additive manufacturing as a viable pathway to minimize plastic waste, fostering a circular economy and cultivating a cleaner planet for generations to come.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Within this scenario, the use of various polymer combinations and the contamination by food, metal, paper, pigments, and ink complicates the recycling of polymers [51].”
From Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction (2025) · cites this paper as [51]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360 · cited 1×
“To achieve sustainability, it is crucial to seek a balance between environmental, social, and economic considerations [132].”
BackgroundConceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550 · cited 2×
“Defining the circular economy in precise terms can be challenging due to the many facets of the concept [16,17].”
BackgroundGhisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536 · cited 2×
“It involves creating economic systems that promote sustainable development, job creation, and a fair distribution of wealth and resources [134].”
BackgroundMethodAccumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126 · cited 1×
“…86% of plastic ending up in landfills [4], a substantial volume of plastic waste has accumulated over the last few decades, resulting in waste-management issues as well as the environmental crises of microplastics in marine environments and microplastic ingestion by humans and animals [5,6].”
BackgroundWhat a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050
Kaza, S., Yao, L. C., Bhada-Tata, P., Van Woerden, F., & Levine, D. (2018) · doi:10.1596/978-1-4648-1329-0 · Cited by 6,126 · cited 2×
“0” [15], the world generated 242 million tons of plastic waste in 2016, and this figure is predicted to increase to 460 million tons per year by 2030 if the current trend continues.”
BackgroundCircular economy: The concept and its limitations
Korhonen, J., Honkasalo, A., & Seppälä, J. (2018) · Ecological Economics · doi:10.1016/j.ecolecon.2017.06.041 · Cited by 3,961 · cited 1×
“This includes investing in renewable energy, sustainable agriculture, eco-friendly transportation, and circular economy principles to achieve a more sustainable future [136,137].”
BackgroundHahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873 · cited 1×
“These two mechanisms are in competition with each other, and their prevalence is influenced by factors such as polymer structure, composition, initial molecular weight, and processing temperature [35,114].”
BackgroundMechanical Behavior of Materials
Meyers, M. A., & Chawla, K. K. (2008) · Cambridge University Press eBooks · doi:10.1017/cbo9780511810947 · Cited by 3,376
Murray, A., Skene, K., & Haynes, K. (2017) · Journal of Business Ethics · doi:10.1007/s10551-015-2693-2 · Cited by 3,328 · cited 1×
“This includes investing in renewable energy, sustainable agriculture, eco-friendly transportation, and circular economy principles to achieve a more sustainable future [136,137].”
BackgroundMechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276 · cited 4×
“These two mechanisms are in competition with each other, and their prevalence is influenced by factors such as polymer structure, composition, initial molecular weight, and processing temperature [35,114].”
BackgroundInfluentialPlastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201 · cited 7×
“Tertiary recycling focuses on the recovery of chemical constituents from plastic scrap, while quaternary recycling harnesses the energy content of scrap plastic to generate steam and electricity [2].”
BackgroundMethodInfluentialAdditive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889 · cited 1×
“By enabling recycling to occur locally, DRAM simplifies supply chain systems and logistics [21,22].”
BackgroundGregory, M. R. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0265 · Cited by 1,852 · cited 1×
“…86% of plastic ending up in landfills [4], a substantial volume of plastic waste has accumulated over the last few decades, resulting in waste-management issues as well as the environmental crises of microplastics in marine environments and microplastic ingestion by humans and animals [5,6].”
Background3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732 · cited 1×
“These communities are becoming essential participants in the effort to incorporate recycled waste into their printing materials [26].”
BackgroundMechanical Recycling of Packaging Plastics: A Review
Schyns, Z. O. G., & Shaver, M. P. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202000415 · Cited by 1,643 · cited 3×
“[30] Recycling of waste from polymer materials: An overview of the recent works.”
BackgroundInfluentialCircular economy as an essentially contested concept
Korhonen, J., Nuur, C., Feldmann, A., & Birkie, S. E. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.111 · Cited by 1,568 · cited 2×
“Defining the circular economy in precise terms can be challenging due to the many facets of the concept [16,17].”
BackgroundGenovese, A., Acquaye, A. A., Figueroa, A., & Koh, S. C. L. (2017) · Omega · doi:10.1016/j.omega.2015.05.015 · Cited by 1,502 · cited 1×
“Plastic waste poses a significant environmental threat due to its slow biodegradability and persistent presence in the ecosystem [141].”
BackgroundThe Concept of Sustainable Economic Development
Barbier, E. B. (1987) · Environmental Conservation · doi:10.1017/s0376892900011449 · Cited by 1,174 · cited 1×
“Social sustainability focuses on promoting social justice, equity, and inclusion [133].”
BackgroundAwaja, F., & Pavel, D. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.02.005 · Cited by 1,045 · cited 2×
“Secondly, the degradation of the coating itself adds to the deterioration of the plastic material [98].”
BackgroundMeasuring circular economy strategies through index methods: A critical analysis
Elia, V., Gnoni, M. G., & Tornese, F. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.196 · Cited by 892 · cited 1×
“Achieving sustainability requires collaboration among governments, businesses, and individuals to develop and implement sustainable policies, technologies, and practices [135].”
BackgroundPeterson, J. D., Vyazovkin, S., & Wight, C. A. (2001) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g · Cited by 774 · cited 1×
“Peterson et al. [122] conducted a study that revealed the initiation of thermal degradation through random chain scission in the absence of oxygen.”
BackgroundChallenges and strategies for effective plastic waste management during and post COVID-19 pandemic
Vanapalli, K. R., Sharma, H. B., Ranjan, V. P., Samal, B., Bhattacharya, J., Dubey, B. K., & Goel, S. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141514 · Cited by 731
Managing Plastic Waste─Sorting, Recycling, Disposal, and Product Redesign
Lange, J.-P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05013 · Cited by 637 · cited 1×
“X-ray technology is also utilized to sort plastics based on their elemental composition, which is particularly useful for identifying and separating PVC containers due to their high chlorine content [35,93,94].”
BackgroundPatrício Silva, A. L., Prata, J. C., Walker, T. R., Campos, D., Duarte, A. C., Soares, A. M. V. M., Barcelò, D., & Rocha-Santos, T. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.140565 · Cited by 585
Recycling of waste from polymer materials: An overview of the recent works
Hamad, K., Kaseem, M., & Deri, F. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.09.025 · Cited by 537 · cited 2×
“[31] Mechanical recycling: Compatibilization of mixed thermoplastic wastes.”
BackgroundPolyethylene Terephthalate (PET) Bottle-to-Bottle Recycling for the Beverage Industry: A Review
Benyathiar, P., Kumar, P., Carpenter, G., Brace, J., & Mishra, D. K. (2022) · Polymers · doi:10.3390/polym14122366 · Cited by 516 · cited 1×
“Studies have explored various additives, processing parameters, and types of rPET waste to enhance the properties of injection-molded rPET, demonstrating the potential for sustainable solutions and value-added product creation in addressing the plastic waste issue [159].”
BackgroundHonarvar, F., & Varvani-Farahani, A. (2020) · Ultrasonics · doi:10.1016/j.ultras.2020.106227 · Cited by 489 · cited 1×
“Based on the specific requirements of the application, the community can develop a similar system tailored to their needs, further improving the process control of 3D printing within a community recycling center and enhancing the reliability and efficiency of their printing operations [214].”
BackgroundMagnetic Extraction of Microplastics from Environmental Samples
Grbic, J., Nguyen, B., Guo, E., You, J. B., Sinton, D., & Rochman, C. M. (2019) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.8b00671 · Cited by 487
Polymer Weathering: Photo-Oxidation
Feldman, D. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021148205366 · Cited by 432 · cited 1×
“UV radiation, through photophysical and photochemical processes, along with the presence of oxygen and water, causes oxidative and hydrolytic effects on the polymers [129].”
BackgroundThe effects of behavior and attitudes on drop-off recycling activities
Sidique, S. F., Lupi, F., & Joshi, S. V. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2009.07.012 · Cited by 427
Quality concepts for the improved use of recycled polymeric materials: a review
Vilaplana, F., & Karlsson, S. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700393 · Cited by 414 · cited 1×
“[34] Mechanical and chemical recycling of solid plastic waste.”
BackgroundSchwarz, A. E., Ligthart, T. N., Godoi Bizarro, D., De Wild, P., Vreugdenhil, B., & van Harmelen, T. (2021) · Waste Management · doi:10.1016/j.wasman.2020.12.020 · Cited by 411 · cited 1×
“This model replaces the linear economy approach known as the “take-make-dispose” model [134,139].”
MethodCruz Sanchez, F. A., Boudaoud, H., Camargo, M., & Pearce, J. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121602 · Cited by 410 · cited 4×
“…circulated within the economy, aligning with the principles of environmental preservation and social well-being. circular promotes A promising development in polymer recycling involves the integration of additive manufacturing facilities with relatively smaller-sized plastic extruders [21].”
BackgroundInfluentialMechanical recycling: Compatibilization of mixed thermoplastic wastes
Maris, J., Bourdon, S., Brossard, J.-M., Cauret, L., Fontaine, L., & Montembault, V. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.11.001 · Cited by 404 · cited 5×
“Compatibilization techniques can enhance the properties of mixed plastic waste, making mechanical recycling feasible [32].”
BackgroundMethodInfluentialLay, M., Thajudin, N. L. N., Hamid, Z. A. A., Rusli, A., Abdullah, M. K., & Shuib, R. K. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107341 · Cited by 393 · cited 1×
“Notably, the tensile strength, elastic modulus, elongation at break, and impact strength of 3D printed samples are significantly lower than those of injection molded samples [235].”
BackgroundA circular economy approach to plastic waste
Payne, J., McKeown, P., & Jones, M. D. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.05.014 · Cited by 385
Why is recycling of postconsumer plastics so challenging?
Vogt, B. D., Stokes, K. K., & Kumar, S. K. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00648 · Cited by 385 · cited 1×
“X-ray technology is also utilized to sort plastics based on their elemental composition, which is particularly useful for identifying and separating PVC containers due to their high chlorine content [35,93,94].”
Background3D printing filament as a second life of waste plastics—a review
Mikula, K., Skrzypczak, D., Izydorczyk, G., Warchoł, J., Moustakas, K., Chojnacka, K., & Witek-Krowiak, A. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10657-8 · Cited by 382 · cited 1×
“[37] Polymers 2023 , 15 , 3881 8 of 45 The focus of this study is to explore key themes within the six stages (recovery, preparation, compounding, feedstock, printing, and quality) of the distributed recycling by additive manufacturing chain proposed.”
BackgroundThermal degradation of polymeric materials
(1994) · Additives for Polymers · doi:10.1016/0306-3747(94)90200-3 · Cited by 342 · cited 1×
“When plastics are exposed to higher temperatures during the melting process, thermal degradation can occur, leading to the breaking of the polymeric chain’s weakest bonds and causing a reduction in the compound’s molecular weight [119].”
BackgroundKhalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314 · cited 1×
“However, a major concern arises from the fact that most plastic produced in the last 60 years is not biodegradable and, consequently, can take decades to decompose [1–3].”
BackgroundCompatibilization of Polymer Blends
Utracki, L. A. (2002) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450800601 · Cited by 297 · cited 1×
“In such cases, the blends may exhibit the presence of large particles from the less abundant component, uneven distribution, and poor adhesion to the surrounding matrix [106].”
BackgroundKreiger, M., & Pearce, J. M. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400093k · Cited by 295 · cited 2×
“Moreover, 3D printing allows for the creation of customized and complex designs as well as minimizing material waste during production [167].”
BackgroundResearch progress for plastic waste management and manufacture of value-added products
Pan, D., Su, F., Liu, C., & Guo, Z. (2020) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-020-00190-0 · Cited by 276
Degradation of polymer blends: A brief review
La Mantia, F. P., Morreale, M., Botta, L., Mistretta, M. C., Ceraulo, M., & Scaffaro, R. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.07.011 · Cited by 268 · cited 1×
“The varying degradation rates among the constituent polymers can impact the overall degradation behavior during recycling [109].”
BackgroundDoshi, M., Mahale, A., Kumar Singh, S., & Deshmukh, S. (2022) · Materials Today: Proceedings · doi:10.1016/j.matpr.2021.10.003 · Cited by 256
Polymer ageing: physics, chemistry or engineering? Time to reflect
White, J. R. (2006) · Comptes Rendus. Chimie · doi:10.1016/j.crci.2006.07.008 · Cited by 255 · cited 1×
“For instance, the interaction between oxygen and the polymer can result in a specific type of degradation known as thermal oxidation [121].”
BackgroundPlastics as a materials system in a circular economy
Bucknall, D. G. (2020) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2019.0268 · Cited by 255 · cited 2×
“…focuses on mitigating environmental damage and pollution, the circular economy aims to address the underlying causes of environmental degradation [19]. which primarily focuses on mitigating environmental damage and pollution, the circular economy aims to address the underlying causes of…”
BackgroundDegradation and Recycling of Films Based on Biodegradable Polymers: A Short Review
Scaffaro, R., Maio, A., Sutera, F., Gulino, E., & Morreale, M. (2019) · Polymers · doi:10.3390/polym11040651 · Cited by 254
Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid
Anderson, I. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0054 · Cited by 248 · cited 1×
“Anderson conducted a comparative study on 3D printed parts using virgin polylactic acid (PLA) and Anderson conducted a comparative study on 3D printed parts using virgin polylactic acid (PLA) and recycled PLA [241]. recycled PLA [240].”
MethodMechanical reprocessing of polyolefin waste: A review
Yin, S., Tuladhar, R., Shi, F., Shanks, R. A., Combe, M., & Collister, T. (2015) · Polymer Engineering & Science · doi:10.1002/pen.24182 · Cited by 246
Processability and mechanical properties of extensively recycled high density polyethylene
Oblak, P., Gonzalez-Gutierrez, J., Zupančič, B., Aulova, A., & Emri, I. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.01.012 · Cited by 239
Recycled polypropylene blends as novel 3D printing materials
Zander, N. E., Gillan, M., Burckhard, Z., & Gardea, F. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.11.009 · Cited by 239 · cited 2×
“The aim is to mend the polymer chains that may have broken during melt processing due to chain scissions [195].”
BackgroundThe Discourse of the Middle Ground: Citizen Shell Commits to Sustainable Development
Livesey, S. M. (2002) · Management Communication Quarterly · doi:10.1177/0893318902153001 · Cited by 235 · cited 1×
“The remaining plastic production caters to intermediate lifespan products including electrical and electronic goods, furniture, vehicles, and agriculture [2,10,11].”
BackgroundFused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties
Woern, A. L., Byard, D. J., Oakley, R. B., Fiedler, M. J., Snabes, S. L., & Pearce, J. M. (2018) · Materials · doi:10.3390/ma11081413 · Cited by 233 · cited 1×
“The granules are heated and melted by passing through a screw extruder, after which the molten material is extruded through an extrusion nozzle to build the desired object [163].”
BackgroundZhong, S., & Pearce, J. M. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.023 · Cited by 232 · cited 2×
“Additive manufacturing, commonly known as 3D printing, presents a promising solution for integrating plastics into the circular economy and recycling plastic waste [162].”
BackgroundSemi-crystalline feedstock for filament-based 3D printing of polymers
Vaes, D., & Van Puyvelde, P. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101411 · Cited by 231 · cited 1×
“Consequently, our focus will be on investigating these mechanisms, aiming to enhance our comprehension of the potential degradation processes that could occur in recycled 3D printed components [239].”
BackgroundHuang, S., Wang, H., Ahmad, W., Ahmad, A., Ivanovich Vatin, N., Mohamed, A. M., Deifalla, A. F., & Mehmood, I. (2022) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph19084556 · Cited by 230
Plastic Waste Management: A Review of Existing Life Cycle Assessment Studies
Alhazmi, H., Almansour, F. H., & Aldhafeeri, Z. (2021) · Sustainability · doi:10.3390/su13105340 · Cited by 225
Shamsuyeva, M., & Endres, H.-J. (2021) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2021.100168 · Cited by 223
Neo, E. R. K., Yeo, Z., Low, J. S. C., Goodship, V., & Debattista, K. (2022) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2022.106217 · Cited by 222
Kazemi, M., Faisal Kabir, S., & Fini, E. H. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105776 · Cited by 221 · cited 1×
“The accumulation of plastic waste and its disposal in landfills or incineration contribute to environmental pollution and greenhouse gas emissions, exacerbating climate change [153].”
BackgroundLifecycle assessment and economic evaluation of recycling: A case study
Craighill, A. L., & Powell, J. C. (1996) · Resources, Conservation and Recycling · doi:10.1016/0921-3449(96)01105-6 · Cited by 218 · cited 1×
“As an illustration, Craighill and Powell [14] highlight that PET plastics generated in Britain are often exported to centralized recycling facilities in the Netherlands and Ireland for recycling, reflecting the challenges posed by transporting lightweight plastic waste over long distances.”
BackgroundWu, X., Li, J., Yao, L., & Xu, Z. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118732 · Cited by 217
Polymer Recycling in Additive Manufacturing: an Opportunity for the Circular Economy
Shanmugam, V., Das, O., Neisiany, R. E., Babu, K., Singh, S., Hedenqvist, M. S., Berto, F., & Ramakrishna, S. (2020) · Materials Circular Economy · doi:10.1007/s42824-020-00012-0 · Cited by 216 · cited 1×
“[36] 3D printing filament as a second life of waste plastics a review.”
BackgroundHowson, P. (2020) · Marine Policy · doi:10.1016/j.marpol.2020.103873 · Cited by 208
The social contribution of the circular economy
Valencia, M., Bocken, N. M. P., Loaiza, C., & Jaeger, S. D. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137082 · Cited by 208
Recycled polyethylene terephthalate as a new FFF feedstock material
Zander, N. E., Gillan, M., & Lambeth, R. H. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.007 · Cited by 207
Contamination in plastic recycling: influence of metals on the quality of reprocessed plastic
Eriksen, M. K., Pivnenko, K., Olsson, M. E., & Astrup, T. F. (2018) · Waste Management · doi:10.1016/j.wasman.2018.08.007 · Cited by 201 · cited 2×
“Eriksen et al. [100] explored the presence of metals in recycled plastic waste and found that metal concentrations increased after the recycling process, although they remained within acceptable limits for food safety [100].”
BackgroundLinear, Graft, and Beyond: Multiblock Copolymers as Next-Generation Compatibilizers
Self, J. L., Zervoudakis, A. J., Peng, X., Lenart, W. R., Macosko, C. W., & Ellison, C. J. (2022) · JACS Au · doi:10.1021/jacsau.1c00500 · Cited by 194 · cited 1×
“For a thorough understanding, interested readers can refer to [247].”
BackgroundPolypropylene chain scissions and molecular weight changes in multiple extrusion
González-González, V. A., Neira-Velázquez, G., & Angulo-Sánchez, J. L. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00233-9 · Cited by 191 · cited 1×
“Additionally, an increasing number of recycling process cycles have been found to decrease the average molecular weight of the polymer chains, affecting their behavior, and influencing the melt flow properties of the recycled material [228–232].”
BackgroundMazhandu, Z. S., Muzenda, E., Mamvura, T. A., Belaid, M., & Nhubu, T. (2020) · Sustainability · doi:10.3390/su12208360 · Cited by 189
Quantification and evaluation of plastic waste in the United States
Milbrandt, A., Coney, K., Badgett, A., & Beckham, G. T. (2022) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2022.106363 · Cited by 189 · cited 1×
“With a staggering 86% of plastic ending up in landfills [4], a substantial volume of plastic waste has accumulated over the last few decades, resulting in waste-management issues as well as the environmental crises of microplastics in marine environments and microplastic ingestion by humans and…”
BackgroundNovel trends in plastic waste management
Idumah, C. I., & Nwuzor, I. C. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1468-2 · Cited by 187
Browning, S., Beymer-Farris, B., & Seay, J. R. (2021) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2021.100682 · Cited by 187 · cited 1×
“In these areas, the collection and disposal of plastic waste is further complicated by weak policies and a shortage of resources [92].”
BackgroundShen, L., & Worrell, E. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-396459-5.00013-1 · Cited by 180 · cited 1×
“These factors can lead to a reduction in the average molecular weight and mechanical properties of the polymer [104].”
BackgroundAssessment of Environmental Biodegradation of Synthetic Polymers
Andrady, A. L. (1994) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321799408009632 · Cited by 179 · cited 1×
“However, a major concern arises from the fact that most plastic produced in the last 60 years is not biodegradable and, consequently, can take decades to decompose [1–3].”
BackgroundSantander, P., Cruz Sanchez, F. A., Boudaoud, H., & Camargo, M. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104531 · Cited by 177
Rahimizadeh, A., Kalman, J., Fayazbakhsh, K., & Lessard, L. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107101 · Cited by 169 · cited 1×
“Therefore, [193] used a laser micrometer with an accuracy of ± 2 µ m to monitor the filament diameter during extrusion.”
MethodDefinitions of the circular economy: Circularity matters
Figge, F., Thorpe, A. S., & Gutberlet, M. (2023) · Ecological Economics · doi:10.1016/j.ecolecon.2023.107823 · Cited by 169 · cited 1×
“By incorporating all the Rs into the circular economy, society can significantly reduce its environmental impact and promote sustainable practices for future generations [145].”
BackgroundMechanochemical Degradation and Recycling of Synthetic Polymers
Zhou, J., Hsu, T., & Wang, J. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202300768 · Cited by 167
Thermal and mechanical degradation during polymer extrusion processing
Capone, C., Di Landro, L., Inzoli, F., Penco, M., & Sartore, L. (2007) · Polymer Engineering & Science · doi:10.1002/pen.20882 · Cited by 166 · cited 1×
“By subjecting the material to similar processing conditions in terms of temperature and duration, but varying the mechanical stresses, distinct variations in molecular weight were observed, which were detected through changes in melt viscosity [117].”
MethodLubongo, C., & Alexandridis, P. (2022) · Recycling · doi:10.3390/recycling7020011 · Cited by 165 · cited 1×
“Black plastics have been identified as a hindrance to efficient sorting [97,98].”
BackgroundNiyommaneerat, W., Suwanteep, K., & Chavalparit, O. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136203 · Cited by 165 · cited 1×
“The concept of a circular economy is important for achieving sustainability, as it focuses on reducing waste and maximizing resource efficiency, leading to a more robust and sustainable future [138].”
BackgroundReich, M. J., Woern, A. L., Tanikella, N. G., & Pearce, J. M. (2019) · Materials · doi:10.3390/ma12101642 · Cited by 164 · cited 1×
“Proper sorting of plastics becomes a Moreover, 3D printing creation of customized and complex designs as well as minimizing material waste during production [168]. crucial step that greatly influences the success of 3D printing with recycled materials [171].”
BackgroundA comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA
Lanzotti, A., Martorelli, M., Maietta, S., Gerbino, S., Penta, F., & Gloria, A. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.02.030 · Cited by 162 · cited 2×
“Anderson conducted a comparative study on 3D printed parts using virgin polylactic acid (PLA) and Anderson conducted a comparative study on 3D printed parts using virgin polylactic acid (PLA) and recycled PLA [241]. recycled PLA [240].”
BackgroundMethodMechanical recycling of polylactide, upgrading trends and combination of valorization techniques
Badia, J. D., & Ribes-Greus, A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.005 · Cited by 161 · cited 1×
“[33] Quality concepts for the improved use of recycled polymeric materials: A review.”
BackgroundDorigato, A. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.02.005 · Cited by 160
Botelho, G., Queirós, A., Liberal, S., & Gijsman, P. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00088-x · Cited by 156 · cited 1×
“Thermal degradation in PET has also been observed [123,124].”
BackgroundMoisture-induced changes in the mechanical behavior of 3D printed polymers
Banjo, A. D., Agrawal, V., Auad, M. L., & Celestine, A. N. (2022) · Composites Part C Open Access · doi:10.1016/j.jcomc.2022.100243 · Cited by 156 · cited 1×
“During the reprocessing of polymers, moisture is another factor that contributes to degradation and leads to a decrease in molecular weight and durability [126].”
BackgroundRusso, I., Confente, I., Scarpi, D., & Hazen, B. T. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.044 · Cited by 152
Taghavi, N., Udugama, I. A., Zhuang, W., & Baroutian, S. (2021) · Biotechnology Advances · doi:10.1016/j.biotechadv.2021.107731 · Cited by 151 · cited 2×
“…the need for long-distance Policymakers and businesses must prioritize sustainability concerns and integrate circular economy principles into their strategies to support the shift towards a circular economy for plastic [152]. long-distance transportation centralized recycling facilities [150].”
BackgroundHow will additives shape the future of plastics?
Pfaendner, R. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.10.017 · Cited by 150 · cited 3×
“This difference arises due to structural variations in the plastic, the presence of stabilizer residues from the initial application, and loose policies and standards [243].”
BackgroundInfluentialPlasticity of semicrystalline polymers
Bartczak, Z., & Galeski, A. (2010) · Macromolecular Symposia · doi:10.1002/masy.201050807 · Cited by 150 · cited 1×
“Both these crystalline block segments and the interlinking amorphous regions adjust their orientation to align with the direction of maximum stretch, known as the principal stretch direction [219].”
BackgroundWoern, A. L., McCaslin, J. R., Pringle, A. M., & Pearce, J. M. (2018) · HardwareX · doi:10.1016/j.ohx.2018.e00026 · Cited by 149 · cited 1×
“Moreover, the filament must be free of contaminants such as dust and particles [205].”
BackgroundWorrell, E., & Reuter, M. A. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-396459-5.00001-5 · Cited by 147
Designing Compatibilizers To Reduce Interfacial Tension in Polymer Blends
Lyatskaya, Y., Gersappe, D., Gross, N. A., & Balazs, A. C. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp952422e · Cited by 146 · cited 1×
“Such an understanding is crucial for the development of effective and affordable compatibilizers [108].”
BackgroundRaffa, P., Coltelli, M., Savi, S., Bianchi, S., & Castelvetro, V. (2011) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2011.10.007 · Cited by 145 · cited 1×
“It is important to consider that some chain extenders might exhibit limited thermal stability, posing risks during multiple recycling cycles [248].”
BackgroundPlastic waste management, a matter for the ‘community’
Drzyzga, O., & Prieto, A. (2019) · Microbial Biotechnology · doi:10.1111/1751-7915.13328 · Cited by 144
Recent developments in the thermal degradation of polystyrene—A review
Guyot, A. (1986) · Polymer Degradation and Stability · doi:10.1016/0141-3910(86)90052-2 · Cited by 141 · cited 1×
“High temperatures and shear stresses cause chain scission, reducing polymer chain length [221,222].”
BackgroundPolymer degradation: a short review
Vohlídal, J. (2021) · Chemistry Teacher International · doi:10.1515/cti-2020-0015 · Cited by 140
A review article on FDM process parameters in 3D printing for composite materials
Patel, R., Desai, C. R., Kushwah, S., & Mangrola, M. H. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.02.385 · Cited by 139 · cited 2×
“Another factor that needs to be considered is the print orientation, which affects the object’s structural integrity and surface finish [210,211].”
BackgroundPlastic yielding of semicrystalline polymers affected by amorphous phase
Różański, A., & Gałęski, A. (2012) · International Journal of Plasticity · doi:10.1016/j.ijplas.2012.07.008 · Cited by 137 · cited 2×
“The amorphous thermoplastics featuring a network of randomly organized and entan-gled polymer chains [216], exhibit an isotropic behavior.”
BackgroundGreen fab lab applications of large-area waste polymer-based additive manufacturing
Byard, D. J., Woern, A. L., Oakley, R. B., Fiedler, M. J., Snabes, S. L., & Pearce, J. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.006 · Cited by 134 · cited 1×
“Community-scale recycling centers can benefit from cost-effective and accessible shredding systems, such as the open-source plastic granulator, which can be built by members of the local community with expertise in mechanical and electrical fabrication [202].”
BackgroundVidakis, N., Petousis, M., Maniadi, A., Koudoumas, E., Vairis, A., & Kechagias, J. D. (2020) · Sustainability · doi:10.3390/su12093568 · Cited by 132 · cited 1×
“…explored various recycling approaches for acrylonitrile-butadiene-styrene [192], polyamide [166], polypropylene [190], high-density polyethylene [191], and polyethylene terephthalate glycol [243]. investigations examined the impact of thermomechanical processing on the mechanical, thermal, and…”
BackgroundVidakis, N., Petousis, M., Tzounis, L., Maniadi, A., Velidakis, E., Mountakis, N., & Kechagias, J. D. (2021) · Materials · doi:10.3390/ma14020466 · Cited by 130 · cited 3×
“It also helps conserve resources by reusing plastic, reducing the need for new plastic production and the associated energy consumption [165].”
BackgroundRonkay, F., Molnar, B., Gere, D., & Czigany, T. (2021) · Waste Management · doi:10.1016/j.wasman.2020.09.029 · Cited by 129 · cited 1×
“Comparative analysis with virgin plastics indicates that recycled plastic products exhibit comparable properties, highlighting the potential for effective recycling of marine plastic waste and the significance of improved waste management strategies in marine environments [160].”
BackgroundCircular Economy: Questions for Responsible Minerals, Additive Manufacturing and Recycling of Metals
Giurco, D., Littleboy, A., Boyle, T., Fyfe, J., & White, S. (2014) · Resources · doi:10.3390/resources3020432 · Cited by 128 · cited 2×
“Instead of single-use, plastics could be given new life through recycling to make use of the embodied energy already spent in production and distribution of the plastic [7,8].”
BackgroundAlexandre, A., Sanchez, F. A. C., Boudaoud, H., Camargo, M., & Pearce, J. M. (2020) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2019.0195 · Cited by 128 · cited 1×
“Consistent with our calculations, Alexandre et al., have indicated that the production costs of fused granular fabrication pellets can be efficiently reduced to less than $1 per kilogram of material [177].”
Poly (ethylene terephthalate) thermo-mechanical and thermo-oxidative degradation mechanisms
Romão, W., Franco, M. F., Corilo, Y., Eberlin, M. N., Spinacé, M. A. S., & Paoli, M. D. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.05.017 · Cited by 127 · cited 1×
“Thermal degradation in PET has also been observed [123,124].”
BackgroundEnabling a circular economy for chemicals in plastics
Aurisano, N., Weber, R., & Fantke, P. (2021) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2021.100513 · Cited by 123 · cited 1×
“The The circular economy prioritizes the circularity of resource fl ow and aims to prevent the loss of materials from the system [18]. economy prioritizes the circularity of resource flow and aims to prevent the loss of materials from the system [18].”
BackgroundIntegrating carbon fiber reclamation and additive manufacturing for recycling CFRP waste
Liu, W., Huang, H., Zhu, L., & Liu, Z. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108808 · Cited by 121 · cited 3×
“Furthermore, recycling can create new markets for recycled plastic materials, promoting economic diversification and generating new business opportunities [166].”
BackgroundGardas, B. B., Raut, R. D., & Narkhede, B. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.01.113 · Cited by 119
Madhu, N. R., Erfani, H., Jadoun, S., Amir, M., Thiagarajan, Y., & Chauhan, N. P. S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10048-y · Cited by 117 · cited 1×
“[38]”
Quality control issues in 3D-printing manufacturing: a review
Wu, H., & Chen, T. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2017-0031 · Cited by 116 · cited 1×
“Wu and Chen conducted an analysis using cause-and-effect analysis [208] to identify factors contributing to poor print quality, which are summarized in Figure 8.”
MethodRecycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing
Zander, N. E., Park, J. H., Boelter, Z. R., & Gillan, M. (2019) · ACS Omega · doi:10.1021/acsomega.9b01564 · Cited by 113
Vidakis, N., Petousis, M., Tzounis, L., Grammatikos, S., Porfyrakis, E., Maniadi, A., & Mountakis, N. (2021) · Materials · doi:10.3390/ma14051162 · Cited by 113 · cited 1×
“However, a third recycling process had a negative impact on the short-beam strength, leading to decreased strength and increased variability in the results [242]. terephthalate glycol [242].”
BackgroundDistributed Recycling of Post-Consumer Plastic Waste in Rural Areas
Kreiger, M. A., Anzalone, G. C., Mulder, M., Glover, A. G., & Pearce, J. M. (2013) · MRS Proceedings · doi:10.1557/opl.2013.258 · Cited by 112 · cited 1×
“Over the past decade, the concept of distributed recycling by additive manufacturing (DRAM) has garnered considerable attention in academic literature [200].”
BackgroundEffects of Fluids on the Deformation, Strength and Durability of Polymeric Composites – An Overview
Weitsman, Y., & Elahi, M. M. E. (2000) · Mechanics of Time-Dependent Materials · doi:10.1023/a:1009838128526 · Cited by 111 · cited 1×
“Moisture causes swelling in the amorphous phase, leading to residual hygroscopic stresses and degradation through hydrolysis [127].”
BackgroundVidakis, N., Petousis, M., Tzounis, L., Maniadi, A., Velidakis, E., Mountakis, N., Papageorgiou, D., Liebscher, M., & Mechtcherine, V. (2020) · Sustainability · doi:10.3390/su13010159 · Cited by 109 · cited 2×
“Sorting waste and ensuring its proper recycling has always been a challenge due to contamination issues [29,189].”
BackgroundBrouwer, M., Picuno, C., Thoden van Velzen, E. U., Kuchta, K., De Meester, S., & Ragaert, K. (2019) · Waste Management · doi:10.1016/j.wasman.2019.09.012 · Cited by 108
Efficient Plastic Recycling and Remolding Circular Economy Using the Technology of Trust–Blockchain
Khadke, S., Gupta, P., Rachakunta, S., Mahata, C., Dawn, S., Sharma, M., Verma, D., Pradhan, A., Krishna, A. M. S., Ramakrishna, S., et al. (2021) · Sustainability · doi:10.3390/su13169142 · Cited by 108
Thermal characterization of recycled polymer for additive manufacturing applications
Boparai, K. S., Singh, R., Fabbrocino, F., & Fraternali, F. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.09.009 · Cited by 107 · cited 1×
“Sorting waste and ensuring its proper recycling has always been a challenge due to contamination issues [29,188].”
BackgroundBarford, A., & Ahmad, S. R. (2021) · Circular Economy and Sustainability · doi:10.1007/s43615-021-00056-7 · Cited by 106
Vehicle routing for the eco-efficient collection of household plastic waste
Bing, X., de Keizer, M., Bloemhof‐Ruwaard, J. M., & van der Vorst, J. G. A. J. (2014) · Waste Management · doi:10.1016/j.wasman.2014.01.018 · Cited by 105 · cited 2×
“…areas where a significant volume of waste is generated, daily household These vehicles are equipped with specialized equipment to collect, compact, and transport waste to designated waste management facilities. waste collection using specialized vehicles has proven to be an effective method [89].”
BackgroundSeparation of plastic wastes using froth flotation – An overview
Kökkılıç, O., Mohammadi-Jam, S., Chu, P., Marion, C., Yang, Y., & Waters, K. E. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2022.102769 · Cited by 103
Dertinger, S., Gallup, N., Tanikella, N. G., Grasso, M., Vahid, S., Foot, P. J. S., & Pearce, J. M. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.104810 · Cited by 102 · cited 2×
“It enables the transformation of plastic waste into new products, reducing the amount of waste generated and the reliance on raw materials, energy, and water typically required in traditional manufacturing processes [164].”
BackgroundIacovidou, E., Velenturf, A. P. M., & Purnell, P. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.07.344 · Cited by 99 · cited 1×
“This cross-contamination compromises the quality of the recycled material, rendering it less valuable and limiting its potential applications [101].”
BackgroundHamad, K., Kaseem, M., & Déri, F. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-5179-8 · Cited by 98 · cited 1×
“Another study examined the rheological and mechanical properties of a polymer blend consisting of PLA and PS, prepared using a single screw extruder [113].”
BackgroundRahmatabadi, D., Soltanmohammadi, K., Aberoumand, M., Soleyman, E., Ghasemi, I., Baniassadi, M., Abrinia, K., Bodaghi, M., & Baghani, M. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200568 · Cited by 98 · cited 1×
“While it is technically possible to Furthermore, some of these difficult-to-recycle plastics can present safety and regulatory concerns, particularly if they release hazardous fumes or byproducts during the recycling and printing processes [173].”
BackgroundChaudhari, U. S., Lin, Y., Thompson, V. S., Handler, R. M., Pearce, J. M., Caneba, G., Muhuri, P., Watkins, D., & Shonnard, D. R. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08622 · Cited by 93 · cited 1×
“…these materials E ff ectively recycling polymers for 3D printing presents a signi fi cant challenge, requiring a thorough understanding of which materials can be recycled without compromising mechanical properties [54]. recycling such materials may not be feasible or would be financially irrelevant.”
BackgroundThermal degradation of polystyrene—I. Chain scission at low temperatures
Cameron, G. G., & Kerr, G. P. (1968) · European Polymer Journal · doi:10.1016/0014-3057(68)90052-9 · Cited by 91 · cited 1×
“High temperatures and shear stresses cause chain scission, reducing polymer chain length [221,222].”
BackgroundBalwada, J., Samaiya, S., & Mishra, R. P. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.01.102 · Cited by 91 · cited 2×
“Waste Collection and Sorting for Recycling E ff ective management of plastic waste requires tailored waste collection methods based on di ff erent types of waste and population densities [88].”
BackgroundMethodGibovic, D., & Bikfalvi, A. (2021) · Recycling · doi:10.3390/recycling6020029 · Cited by 91
A review of laser-induced breakdown spectroscopy for plastic analysis
Liu, K., Tian, D., Li, C., Li, Y., Yang, G., & Ding, Y. (2018) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2018.11.025 · Cited by 88
Spectroscopy: A promising tool for plastic waste management
Adarsh, U. K., Kartha, V. B., Santhosh, C., & Unnikrishnan, V. K. (2022) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2022.116534 · Cited by 88
Zhang, Y., Jiang, H., Bian, K., Wang, H., & Wang, C. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.148345 · Cited by 87
Vidakis, N., David, C., Petousis, M., Sagris, D., & Mountakis, N. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.105171 · Cited by 87 · cited 1×
“Layer height, printing speed, extrusion rate, and temperature settings are important factors in 3D printing [209].”
BackgroundVidakis, N., Petousis, M., & Maniadi, A. (2021) · Recycling · doi:10.3390/recycling6010004 · Cited by 86 · cited 1×
“These Vidakis et al. explored various recycling approaches for acrylonitrile-butadiene-styrene [192], polyamide [166], polypropylene [190], high-density polyethylene [191], and polyethylene terephthalate glycol [243]. investigations examined the impact of thermomechanical processing on the…”
BackgroundLaser induced breakdown spectroscopy for plastic analysis
Zeng, Q., Sirven, J., Gabriel, J. P., Tay, C. Y., & Lee, J. (2021) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2021.116280 · Cited by 84
Hart, K. R., Frketic, J. B., & Brown, J. R. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.011 · Cited by 83 · cited 1×
“In the reviewed literature, the most common filament diameter used for 3D printers is 1.75 mm, with tolerance levels ranging from +/ − 0.04 [194] to 0.1 mm [192].”
BackgroundInfluentialRepair Cafés and Precious Plastic as translocal networks for the circular economy
Spekkink, W., Rödl, M. B., & Charter, M. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135125 · Cited by 79
Plastic Waste Management: Current Status and Weaknesses
Horodytska, O., Cabanes, A., & Fullana, A. (2019) · The handbook of environmental chemistry · doi:10.1007/698_2019_408 · Cited by 78
R, A. A., & Thomas, S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816006-0.00001-3 · Cited by 77 · cited 1×
“The interactions between the components can lead to desired property combinations and improved overall performance [105].”
BackgroundRestabilization – 30 years of research for quality improvement of recycled plastics review
Pfaendner, R. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110082 · Cited by 73 · cited 3×
“A recent review examined the importance of stabilizers in relation to the level of aging and oxidation in polymers, known as predamage [245].”
BackgroundInfluentialAdditive manufacturing of recycled plastics: Strategies towards a more sustainable future
Wu, H., Mehrabi, H. A., Karagiannidis, P., & Naveed, N. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.130236 · Cited by 72 · cited 1×
“Moreover, the integration of additive manufacturing in DRAM opens up possibilities for producing complex structures, enabling innovative approaches to open-loop recycling [23].”
BackgroundAlzerreca, M., Paris, M., Boyron, O., Orditz, D., Louarn, G., & Correc, O. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.06.012 · Cited by 63 · cited 1×
“The presence of contaminants and microparticles has been reported to contribute to a reduction in creep resistance and fatigue properties of the recycled plastics [234].”
BackgroundRecycling and restabilization of polymers for high quality applications. An Overview
Pfaendner, R., Herbst, H., Hoffmann, K., & Sitek, F. (1995) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1995.052320113 · Cited by 61 · cited 2×
“By strategically selecting and utilizing appropriate additives, the properties of recycled polymers can be optimized, promoting their effective reuse and contributing to a more sustainable approach to plastic waste management [244].”
BackgroundIdentification of post-consumer plastics using laser-induced breakdown spectroscopy
Junjuri, R., Zhang, C., Barman, I., & Gundawar, M. K. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.03.012 · Cited by 61
Investigations on the influence of multiple extrusion on the degradation of polyolefins
Schweighuber, A., Felgel-Farnholz, A., Bögl, T., Fischer, J., & Buchberger, W. W. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109689 · Cited by 60 · cited 1×
“[118] provided significant insights into the degradation mechanisms of polyolefins during multiple extrusions using a twin-screw compounder.”
BackgroundNicolau, J. L., Stadlthanner, K. A., Andreu, L., & Font, X. (2022) · Journal of Retailing and Consumer Services · doi:10.1016/j.jretconser.2022.102908 · Cited by 59 · cited 2×
“Governments and businesses are implementing policies and offering incentives to encourage the use of reusable alternatives to single-use plastics, fostering a shift towards sustainability [147,148].”
BackgroundThe Development of Efficient Contaminated Polymer Materials Shredding in Recycling Processes
Flizikowski, J., Kruszelnicka, W., & Macko, M. (2021) · Polymers · doi:10.3390/polym13050713 · Cited by 57 · cited 1×
“Even when the resulting agglomerates or crumbs may not be suitable for direct further processing, they can be mixed with plastic flakes for extrusion [85].”
BackgroundSchneevogt, H., Stelzner, K., Yılmaz, B., Abali, B. E., Klunker, A., & Völlmecke, C. (2021) · Composites and Advanced Materials · doi:10.1177/26349833211000063 · Cited by 57 · cited 1×
“To address be further discussed in Section 4 [169,170]. points among different polymers.”
BackgroundFemtosecond laser-induced breakdown spectroscopy studies for the identification of plastics
Junjuri, R., & Gundawar, M. K. (2019) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c9ja00102f · Cited by 54
Гу, Ф., Hall, P., & Miles, N. J. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.028 · Cited by 51
Chen, X., Kroell, N., Wickel, J., & Feil, A. (2021) · Waste Management · doi:10.1016/j.wasman.2021.01.015 · Cited by 51
Design of an In-Process Quality Monitoring Strategy for FDM-Type 3D Printer Using Deep Learning
Sampedro, G. A., Agron, D. J. S., Amaizu, G. C., Kim, D., & Lee, J. (2022) · Applied Sciences · doi:10.3390/app12178753 · Cited by 51 · cited 1×
“A study has proposed the use of sensors and machine learning algorithms to prevent nozzle clogging, achieving an impressive prediction accuracy rate of 97.2% for the future state of the 3D print [213].”
BackgroundInfluentialCusano, I., Campagnolo, L., Aurilia, M., Costanzo, S., & Grizzuti, N. (2023) · Materials · doi:10.3390/ma16093358 · Cited by 51
Jiang, H., Zhang, Y., Bian, K., Wang, H., & Wang, C. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.107834 · Cited by 49
Morphology of undeformed and deformed polyethylene lamellar crystals
Gałęski, A., Bartczak, Z., Kazmierczak, T., & Šlouf, M. (2010) · Polymer · doi:10.1016/j.polymer.2010.10.004 · Cited by 48 · cited 1×
“With further applied force, the crystalline phase starts to separate into distinct crystalline blocks [218].”
BackgroundManomaivibool, P., & Vassanadumrongdee, S. (2012) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2012.08.014 · Cited by 47 · cited 1×
“These centers incentivize residents to recycle their plastic waste by providing rewards in the form of useful items, household goods, or vouchers for local stores [91].”
BackgroundAn Additive Manufacturing Solution to Produce Big Green Parts from Tires and Recycled Plastics
Domingues, J., Marques, T. M. G., Mateus, A., Carreira, P., & Malça, C. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.08.028 · Cited by 47 · cited 1×
“To address be further discussed in Section 4 [169,170]. points among different polymers.”
BackgroundItim, B., & Philip, M. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.04.004 · Cited by 46 · cited 1×
“Additionally, an increasing number of recycling process cycles have been found to decrease the average molecular weight of the polymer chains, affecting their behavior, and influencing the melt flow properties of the recycled material [228–232].”
BackgroundSaneie, R., Abdollahi, H., Ghassa, S., Azizi, D., & Chelgani, S. C. (2022) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-022-00493-0 · Cited by 46
Post-Consumer Waste Recycling and Optimal Production
Damanhuri, E. (2012) · InTech eBooks · doi:10.5772/2642 · Cited by 45
Chen, S., Zhang, Y., Guo, C., Zhong, Y., Wang, K., & Wang, H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.280 · Cited by 45
Zhang, X., Гу, Ф., Xie, J., Zhang, C., Fu, J., & Zhao, P. (2019) · Waste Management · doi:10.1016/j.wasman.2019.03.008 · Cited by 45
Huang, P., & Peng, H. (2021) · Sustainability · doi:10.3390/su131911085 · Cited by 45 · cited 1×
“Additionally, injection molding reduces waste by reusing plastic that would otherwise end up in landfills or oceans [157].”
BackgroundBorkar, A., Hendlmeier, A., Simon, Ž., Randall, J. D., Stojcevski, F., & Henderson, L. C. (2022) · Polymer Composites · doi:10.1002/pc.26550 · Cited by 45
Simulation of Sustainable Manufacturing Solutions: Tools for Enabling Circular Economy
Khan, A. A., & Abonyi, J. (2022) · Sustainability · doi:10.3390/su14159796 · Cited by 45 · cited 2×
“The 6 Rs framework shown in Figure 4 includes Reduce, Reuse, Recycle, Repair, Refuse, and Rethink, while the 9 Rs framework expands to include Rs such as Refurbish, Remanufacture, Repurpose, or Re-cover [142–144].”
BackgroundMethodvan Straten, B. H., van der Heiden, D. R., Robertson, D., Riekwel, C., Jansen, F. W., van der Elst, M., & Horeman, T. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129121 · Cited by 43
Mihelčič, M., Oseli, A., Huskić, M., & Perše, L. S. (2022) · Polymers · doi:10.3390/polym14245438 · Cited by 43 · cited 1×
“In another recent investigation [246], the incorporation of a stabilizing additive into recycled polypropylene greatly enhanced its performance.”
Background3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
Woern, A. L., & Pearce, J. M. (2018) · Inventions · doi:10.3390/inventions3040078 · Cited by 43 · cited 1×
“Advancements in open-source technology and the availability of pelletizer choppers or open-source granulators offer feasible solutions for the local community to create granules of the appropriate size without the need to produce filament for 3D printers [207].”
BackgroundShredder machine for plastic recycling: A review paper
Wong, J. H., Gan, M. J. H., Chua, B. L., Gakim, M., & Siambun, N. J. (2022) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1217/1/012007 · Cited by 43
The effect of multiple extrusion passes during recycling of high density polyethylene
Zahavich, A. T. P., Latto, B., Takács, E., & Vlachopoulos, J. (1997) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199721)16:1<11::aid-adv2>3.0.co;2-m · Cited by 42 · cited 1×
“Numerous studies have investigated the effects of mechanical recycling on the physicochemical and microstructural characteristics of thermoplastics [31,223–227].”
BackgroundHashim, U. R., Jumahat, A., Jawaid, M., Dungani, R., & Alamery, S. F. (2020) · Polymers · doi:10.3390/polym12112621 · Cited by 42 · cited 1×
“Simultaneously, UV rays from sunlight can accelerate the degradation process by initiating photo-degradation, breaking down chemical bonds in the polymer material and leading to a gradual loss of physical properties [131].”
BackgroundOn the brink of a recycling revolution?
Carey, J. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1620655114 · Cited by 41 · cited 1×
“Carbon black pigments, for example, can block spectroscopic scanning and reduce the efficiency of sorting [96].”
BackgroundMumbach, G. D., Cunha, R. S., Machado, R. A. F., & Bolzan, A. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.05.021 · Cited by 41
Meyer, T. K., Tanikella, N. G., Reich, M. J., & Pearce, J. M. (2020) · Sustainable materials and technologies · doi:10.1016/j.susmat.2020.e00169 · Cited by 41 · cited 1×
“Variations in melting points, viscosities, and flow characteristics can affect printability, leading to issues such as warping, poor layer adhesion, and surface finish problems [174].”
BackgroundLuan, Y., Huang, B., Chen, L., Wang, X., Ma, Y., Yin, M., Song, Y., Liu, H., Ma, X., Zhang, X., et al. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.116829 · Cited by 39 · cited 1×
“Replacing single-use plastics with environmentally friendly alternatives, such as reusable metal or bamboo straws and refillable glass or stainless-steel water bottles, can significantly reduce waste [146].”
BackgroundAllara, D. L. (1975) · Environmental Health Perspectives · doi:10.1289/ehp.751129 · Cited by 37 · cited 1×
“Oxygen reacts with polymer chains, forming oxygenated groups in a phenomenon known as photo-oxidation, resulting in the gradual degradation of polymers [130].”
BackgroundZhang, Y., Li, C., Wang, L., & Wang, H. (2020) · Waste Management · doi:10.1016/j.wasman.2020.05.009 · Cited by 36
Rubber toughened recycled polyethylene terephthalate for material extrusion additive manufacturing
Zander, N. E., & Boelter, Z. R. (2020) · Polymer International · doi:10.1002/pi.6079 · Cited by 36 · cited 2×
“In the reviewed literature, the most common filament diameter used for 3D printers is 1.75 mm, with tolerance levels ranging from +/ − 0.04 [194] to 0.1 mm [192].”
BackgroundInfluentialPodsiadły, B. J., Skalski, A., Rozpiórski, W., & Słoma, M. (2021) · Applied Sciences · doi:10.3390/app11156946 · Cited by 35 · cited 1×
“Therefore, factors such as print speed, print orientation, sample size, layer dimensions and nozzle size might not have a direct impact on the fundamental material properties of the plastic being used in 3D printing [236–238].”
BackgroundInfluence of recycling and contamination on structure and transport properties of polypropylene
Incarnato, L., Scarfato, P., Acierno, D., Milana, M. R., & Feliciani, R. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12168 · Cited by 33 · cited 1×
“Moreover, particularly in scenarios involving contaminants and microparticles, only a limited number of studies have delved into the implications of recycling on thermoplastics [233].”
BackgroundMolding polycarbonate: Moisture degradation effect on physical and chemical properties
Long, T. S., & Sokol, R. (1974) · Polymer Engineering and Science · doi:10.1002/pen.760141202 · Cited by 32 · cited 1×
“The effects of moisture degradation on polycarbonate molding were studied in [128].”
BackgroundMistretta, M. C., Fontana, P., Ceraulo, M., Morreale, M., & Mantia, F. P. L. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.01.002 · Cited by 32 · cited 1×
“For instance, Mis-tretta et al. [110] demonstrated the positive impact of specific compatibilizers in enhancing the photo-resistance of polymer blends.”
BackgroundKravchenko, M., Pigosso, D. C. A., & McAloone, T. C. (2020) · NordDesign Conference (NordDesign) · doi:10.35199/norddesign2020.4 · Cited by 31 · cited 1×
“Instead of single-use, plastics could be given new life through recycling to make use of the embodied energy already spent in production and distribution of the plastic [7,8].”
BackgroundNiaounakis, M. (2014) · Elsevier eBooks · doi:10.1016/b978-0-323-26698-7.00002-7 · Cited by 29 · cited 2×
“While mechanical forces are not the sole catalysts, they greatly accelerate the degradation process, collaborating with other environmental factors such as temperature, UV radiation, and humidity [116].”
Du, Y., Zhang, Y., Jiang, H., Li, T., Luo, M., Wang, L., Wang, C., & Wang, H. (2020) · Waste Management · doi:10.1016/j.wasman.2020.09.006 · Cited by 29
Investigation of Recycled and Coextruded PLA Filament for Additive Manufacturing
Sasse, J., Pelzer, L., Schön, M., Ghaddar, T., & Hopmann, C. (2022) · Polymers · doi:10.3390/polym14122407 · Cited by 29 · cited 1×
“This can lead to issues such as inadequate layer adhesion, stringing, and clogging, which can compromise the quality of the print [175].”
BackgroundNylén, E.-J. A., & Salminen, J. M. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.06.029 · Cited by 28 · cited 2×
“…recyclability by using fewer complex parts and a higher percentage of the same plastic to enhance recycling e ffi ciency and e ff ectiveness [150]. higher percentage Establishing a supply chain that prioritizes recycling is also crucial for a circular economy of plastics. of the same…”
BackgroundDi, L., & Yang, Y. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.132427 · Cited by 28 · cited 1×
“To address this issue, it is crucial to integrate polymers into the circular economy, which involves reducing production and consumption, promoting reuse, recycling, and recovery cycles [154].”
BackgroundQuelal, O. M., Velázquez-Martí, B., & Gisbert, A. F. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15611-w · Cited by 27
Sustainability of Municipal Solid Waste Management
El‐Haggar, S. M. (2007) · Elsevier eBooks · doi:10.1016/b978-012373623-9/50007-1 · Cited by 26
Wei, B., Yang, S., & Wang, Q. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5289 · Cited by 26 · cited 1×
“It was often concluded that which consist of both polymers and aluminum [172].”
BackgroundPolypropylene Post-Consumer Recyclate Compounds for Thermoforming Packaging Applications
Freudenthaler, P. J., Fischer, J., Liu, Y., & Lang, R. W. (2023) · Polymers · doi:10.3390/polym15020345 · Cited by 26 · cited 1×
“A key advantage lies in the ability to carefully select appropriate materials and optimize the thermoforming process, thereby yielding trays with superior stiffness tailored to meet specific requirements [161].”
BackgroundOpen Source Waste Plastic Granulator
Ravindran, A., Scsavnicki, S., Nelson, W., Gorecki, P., Franz, J., Oberloier, S., Meyer, T. K., Barnard, A. R., & Pearce, J. M. (2019) · Technologies · doi:10.3390/technologies7040074 · Cited by 25
Mechanical properties of recycled polymers
Mantia, F. P. L. (1999) · Macromolecular Symposia · doi:10.1002/masy.19991470116 · Cited by 24 · cited 1×
“While reprocessing at high temperatures leads to significant thermal degradation, even lower reprocessing temperatures can induce degradation in polymers susceptible to mechanical degradation [220].”
BackgroundUrbanic, J., Hedrick, R. W., & Burford, C. G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9392-8 · Cited by 24 · cited 1×
“Moreover, controlling the ambient humidity is also important to ensure the print quality and success [212].”
BackgroundSmall circles: The role of physical distance in plastics recycling
Havas, V., Falk‐Andersson, J., & Deshpande, P. C. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.154913 · Cited by 24 · cited 1×
“…approach fosters the development of robust and transparent local recycling systems that are be tt er equipped to meet the unique needs of individual communities [20]. robust and transparent local recycling systems that are better equipped to meet the unique needs of individual communities [20].”
Background
Research works printed but not linked: 10
- (2023, August 31). Wohlers Report 2016 Published: Additive Manufacturing Industry Surpassed $5.1 Billion—Wohlers Associates. Available online: https://wohlersassociates.com/press-releases/wohlers-report-2016-published-additive-manufacturing-industry/.
- Sanchez, F.A.C., Lanza, S., Boudaoud, H., Hoppe, S., and Camargo, M. (2022, November 30). Polymer Recycling and Additive Manufacturing in an Open Source Context: Optimization of Processes and Methods. Available online: https://www.researchgate.net/publication/318922042.
- Horodytska, O., Cabanes, A., and Fullana, A. (2019). Plastics in the Aquatic Environment-Part I: Current Status and Challenges, Springer International Publishing.
- Czarnecka-Komorowska, D., and Kanciak, W. (2023). EAI International Conference on Management of Manufacturing Systems, Springer International Publishing.
- Wong, J.H., Gan, M.J.H., Chua, B.L., Gakim, M., and Siambun, N.J. (2022). IOP Conference Series: Materials Science and Engineering, IOP Publishing.
- Mahule, 2021, Design and Fabrication of Low Cost Plastic Shredder, Int. J. Res. Eng. Sci. Manag., 4, 4
- Hekkert, M.P., and Worrell, E. (2023, February 23). Sustainable Agriculture View Project Regional Economic and Environmental Impacts of Wind Power Developments: A Case Study of a German Region View Project José Potting. Available online: https://www.researchgate.net/publication/319314335.
- Mejia, E.B., Al-Maqdi, S., Alkaabi, M., and Alhammadi, A. (2023, August 18). Upcycling of HDPE Waste using Additive Manufacturing: Feasibility and Challenges; Upcycling of HDPE Waste using Additive Manufacturing: Feasibility and Challenges. Available online: https://www.researchgate.net/publication/342221344_Upcycling_of_HDPE_Waste_using_Additive_Manufacturing_Feasibility_and_Challenges.
- Al Nabhani, D., Kassab, A., Habbal, O., Mohanty, P., Ayoub, G., and Pannier, C. (2023, January 14–16). Benchmarking the Tensile Properties of Polylactic Acid (PLA) Recycled Through Fused Granule Fabrication Additive Manufacturing. Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, USA.
- Giri, J., Patil, A., and Prabhu, H. (2018). Lecture Notes in Networks and Systems, Springer.
Cited by
Dhali, S. L., Parida, D., Kumar, B., & Bala, K. (2024) · Biotechnology for Sustainable Materials · doi:10.1186/s44316-024-00011-0 · Cited by 143
“Several mechanical and chemical plastic recycling strategies suggest that the recycled products are of substand-ard qualities which limits their usage at a large scale [130].”
BackgroundPotential of recycled PLA in 3D printing: A review
Hasan, M. R., Davies, I. J., Pramanik, A., John, M. B., & Biswas, W. K. (2024) · Sustainable Manufacturing and Service Economics · doi:10.1016/j.smse.2024.100020 · Cited by 145
Georgescu, L., Forțea, C., Antohi, V. M., Balsalobre‐Lorente, D., Zlati, M. L., & Bărbuță‐Mișu, N. (2025) · Environmental Sciences Europe · doi:10.1186/s12302-025-01119-4 · Cited by 127
Enache, A.-C., Grecu, I., & Samoilă, P. (2024) · Materials · doi:10.3390/ma17122991 · Cited by 95
Sheriff, S. S., Yusuf, A. A., Akiyode, O. O., Hallie, E. F., Odoma, S., Yambasu, R. A., Thompson-Williams, K., Asumana, C., Gono, S. Z., & Kamara, M. H. (2025) · Waste Management Bulletin · doi:10.1016/j.wmb.2025.100204 · Cited by 85
Metadata
- Authors
- Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., & Ayoub, G. Y.
- Affiliations
- University of Michigan–Dearborn (US)
- Department of Mechanical Engineering, University of Michigan-Dearborn, Dearborn, MI 48128, USA
- Corresponding author
- Ayoub, Georges Y.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2023-09-25
- Volume
- 15
- Issue
- 19
- Pages
- 3881
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC10575100
- OpenAlex
- W4387056394
- Cited by
- 141
- References
- 232
- Citations by year
- 2026: 44 · 2025: 58 · 2024: 29 · 2023: 10
- FWCI
- 2.70
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- plastic recycling, additive manufacturing, 3D printing, circular economy, plastic waste management, community-based recycling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.