CoChat

A Novel Polytetrahydrofuran-Based Shape Memory Polyurethane Enhanced by Polyglycolide-Block-Polytetrahydrofuran-Block-Polyglycolide Copolymer

Open access

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index; 1 of the 9 sources its claims cite were checked for support.

Abstract

Compared with material lacking the block polymer, the polyurethane systems containing the PGA-PTHF-PGA block polymer showed excellent mechanical properties and temperature-responsive shape memory, with conceptual experiments indicating potential medical applications in vascular and wound repair.

Overview

CoChat Summary

TL;DR

A series of crosslinked polyurethanes (PU-GT) were prepared from PGA-PTHF-PGA triblock copolymer, PTHF homopolymer, glycerol, and HDI, giving temperature-responsive shape memory behavior based on PTHF crystallization/melting. PU-GT-50 showed the best combination of mechanical and shape memory performance and was tested in conceptual vascular and wound-repair experiments.

Key findings

  • PTHF in PU-GT crystallized during cooling at −11.5~2.6 °C, and PTHF crystallite melting temperatures were 24.0~26.9 °C; WAXD indicated a small amount of PGA crystallized in PU-GT films.
  • Mechanical properties improved with PGA-PTHF-PGA: PU-GT-100 tensile strength was 2.0 ± 0.5 MPa, while PU-GT-50 reached 35.6 ± 3.4 MPa; maximum elongation at break was 1043 ± 18% for PU-GT-33, and PU-GT-100 had approximately 917 ± 33%.
  • Shape memory: PU-GT-100 had the highest shape fixity at 99.8 ± 0.3% and shape recovery at 92.9 ± 4.6%; PU-GT-0 had much lower fixity at 22.8 ± 6.5%. PU-GT-50 temporary shape was fixed at −20 °C and recovered at 37 °C within 30 s.
  • L929 cell viability remained well above 70%, meeting ISO 10993-5 requirements; PU-GT-50/SA bilayer adhesion on pig skin was 19.4 ± 0.4 kPa, and conceptual experiments suggested potential for vascular and wound repair.

Methods

  • PGA-PTHF-PGA triblock copolymer was synthesized by ring-opening polymerization using PTHF as macro-initiator; PU-GT polyurethanes were prepared by one-pot synthesis with PGA-PTHF-PGA, PTHF, glycerol, and HDI. Samples were named PU-GT-x, where x was the molar ratio of PTHF homopolymer in the polymer diols.
  • Characterization included 1H NMR, GPC, FTIR, non-isothermal DSC, WAXD, tensile testing per ASTM D1708, U-bend shape memory tests, pig-skin adhesion tests, and L929 cytotoxicity by CCK8.
  • Tensile tests were repeated five times and averaged; adhesion values were averaged from at least three samples; shape fixity and recovery were calculated from measured angles using the paper’s equations.

Limitations

  • The paper does not include a dedicated limitations section. It describes the biomedical demonstrations as “conceptual experiments” and uses in vitro simulated models, including a latex tube to simulate damaged blood vessel and pig skin for wound repair.
  • Evident from the text: no in vivo biocompatibility, degradation, or long-term implantation data are reported; cytotoxicity is limited to L929 cells, and wound/vascular repair is only simulated in vitro.
  • Evident from the text: PGA melting was difficult to observe in PU-GT by DSC because of low PGA content, and PTHF diffraction was not observed at room temperature, so some crystalline features were inferred from limited WAXD/DSC evidence.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/polym16243610

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 The synthesis of PU-GT polyurethane. (a) 1H NMR spectra of PTHF and PGA-PTHF-PGA. (b) GPC curves of PTHF and PGA-PTHF-PGA. (c) Synthetic route. (d) FTIR curves (3700–550 cm−1) of PU-GT polyurethanes with different compositions. (e) FTIR curves (1800–1600 cm−1).
Figure 1 The synthesis of PU-GT polyurethane. (a) 1H NMR spectra of PTHF and PGA-PTHF-PGA. (b) GPC curves of PTHF and PGA-PTHF-PGA. (c) Synthetic route. (d) FTIR curves (3700–550 cm−1) of PU-GT polyurethanes with different compositions. (e) FTIR curves (1800–1600 cm−1).CC BY · PubMed Central
Figure 2 Crystallization behaviors of PU-GT polyurethanes with different compositions. (a) DSC curves of non-isothermal crystallization at a rate of 10 °C/min from 230 °C to −40 °C. (b) The subsequent heating curves at a rate of 10 °C/min from −40 °C to 230 °C. (c) Thermal properties obtained from the non-isothermal DSC analysis; Tm, PTHF is the melting temperature of PTHF component during the heating process, Tc, PTHF is the crystallization temperature of PTHF component during the cooling process, ΔHc, PTHF is the exothermic enthalpy of PTHF component obtained from non-isothermal DSC analysis, and ΔHm, PTHF is the fusion enthalpy of PTHF obtained from the heating process. (d) WAXD results of different PU-GT polyurethanes.
Figure 2 Crystallization behaviors of PU-GT polyurethanes with different compositions. (a) DSC curves of non-isothermal crystallization at a rate of 10 °C/min from 230 °C to −40 °C. (b) The subsequent heating curves at a rate of 10 °C/min from −40 °C to 230 °C. (c) Thermal properties obtained from the non-isothermal DSC analysis; Tm, PTHF is the melting temperature of PTHF component during the heating process, Tc, PTHF is the crystallization temperature of PTHF component during the cooling process, ΔHc, PTHF is the exothermic enthalpy of PTHF component obtained from non-isothermal DSC analysis, and ΔHm, PTHF is the fusion enthalpy of PTHF obtained from the heating process. (d) WAXD results of different PU-GT polyurethanes.CC BY · PubMed Central
Figure 3 The tensile properties of PU-GT polyurethanes with different compositions. (a) Representative strain–stress curves, (b) tensile breaking strength, (c) elongation at break, and (d) toughness. Each experiment was repeated five times, and (a) was plotted from the most representative results. The average of the five sets of test results was calculated to obtain (b–d), and the error bars indicate the standard deviation of each set of data from the average.
Figure 3 The tensile properties of PU-GT polyurethanes with different compositions. (a) Representative strain–stress curves, (b) tensile breaking strength, (c) elongation at break, and (d) toughness. Each experiment was repeated five times, and (a) was plotted from the most representative results. The average of the five sets of test results was calculated to obtain (b–d), and the error bars indicate the standard deviation of each set of data from the average.CC BY · PubMed Central
Figure 4 Shape memory behavior of PU-GT polyurethanes. (a) The shape fixity ratio (Rf) and (b) the shape recovery ratio (Rr). (c) Digital photographs showing the shape memory behavior of PU-GT-50. (d) Illustration of the shape memory behavior of PU-GT polyurethane.
Figure 4 Shape memory behavior of PU-GT polyurethanes. (a) The shape fixity ratio (Rf) and (b) the shape recovery ratio (Rr). (c) Digital photographs showing the shape memory behavior of PU-GT-50. (d) Illustration of the shape memory behavior of PU-GT polyurethane.CC BY · PubMed Central
Figure 5 Biocompatibility of the PU-GT polyurethane. (a) Cell proliferation and (b) viability of L929 osteoblast-like cells cultured with PU-GT polyurethane. (c) Illustration of the potential application of PU-GT-50 as vascular repair materials. (d) The structure of PU-GT-50/SA. (e) Adhesion experiment. (f) Shape memory behavior of the double-layer PU-GT polyurethane, showing the permanent shape, the temporary shape after the crystallization at 0 °C, and the restored permanent shape after melting at 37 °C. (g) Illustration of the potential application as wound dressing of PU-GT-50/SA.
Figure 5 Biocompatibility of the PU-GT polyurethane. (a) Cell proliferation and (b) viability of L929 osteoblast-like cells cultured with PU-GT polyurethane. (c) Illustration of the potential application of PU-GT-50 as vascular repair materials. (d) The structure of PU-GT-50/SA. (e) Adhesion experiment. (f) Shape memory behavior of the double-layer PU-GT polyurethane, showing the permanent shape, the temporary shape after the crystallization at 0 °C, and the restored permanent shape after melting at 37 °C. (g) Illustration of the potential application as wound dressing of PU-GT-50/SA.CC BY · PubMed Central

Verification

Claims the paper makes

1 Valid · 0 Not valid · 6 Not checked · 69 Own results and interpretations

45 more claims

Create a free account to see all 76 claims and to verify the 1 reference still open.

See all claims — free account
  • It may state two separate claims as one. 22
  • Probably not a substantial claim. 5

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Metadata

Authors
Li, X., Mao, L., Li, W., Wu, H., Dai, S., Xiao, R., Huang, J., Liu, G., Yang, K., Bu, W., Jiang, N., Gan, Z., & Ning, Z.
Affiliations
  • State Key Laboratory of Organic-Inorganic Composite Materials (CN)
  • State Key Laboratory of Organic-Inorganic Composites, Beijing Laboratory of Biomedical Materials, College of Life Science and Technology, Beijing University of Chemical Technology, Beijing 100029, China
  • Zhejiang Shuren University (CN)
  • Chinese Academy of Sciences (CN)
Corresponding author
  • Yang, Keda
  • Ning, Zhenbo
Venue
Polymers
Publisher
MDPI AG
Published
2024-12-23
Volume
16
Issue
24
Pages
3610
ISSN
2073-4360 (ISSN-L)
OpenAlex
W4405722647
Cited by
1
References
36
Citations by year
2026: 1
FWCI
0.11
Type
journal article
Language
en
Open access
Locations
  • Polymers (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
the National Natural Science Foundation of China (51973010, 52033001, 51603005)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords
shape memory polyurethane, polytetrahydrofuran, block copolymers, temperature-responsive materials, hexamethylene diisocyanate, mechanical properties, vascular repair, wound healing, medical applications

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.