Rheological, Morphological and Mechanical Studies of Sustainably Sourced Polymer Blends Based on Poly(Lactic Acid) and Polyamide 11
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The objective of this study was to gain a deep understanding of composition and compatibilization effects on the properties of entirely sustainably sourced polymer blends based on polylactide (PLA) and polyamide 11 (PA11). Generally, PLA cannot challenge regular commodity polymers due to its weak thermo-mechanical properties and its poor elongation properties. With this work, however, we present a promising route to overcome these drawbacks in order to enhance the processability of PLA: blending the polymer with various compositions of other ductile biopolymers such as PA11, as well as mixing PLA/PA11 blends with various amounts of a chain extender, Joncryl ADR®-4368, containing reactive epoxy functions, in a laboratory-scale twin-screw extruder. The effects on the rheological, morphological and mechanical properties were investigated. Results showed that a “self compatibilization” between PLA and PA11 chains can occur but it was found to be insufficient, contrary to recent work reported in the literature. The role of Joncryl as a compatibilizer for the PLA/PA11 system has been demonstrated by the significant decrease of particle size and interfacial tension as well as the improvement of ductile properties. Moreover, a new relaxation peak appeared in the relaxation spectrum, indicating the generation of a copolymer at the polymer-polymer interface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707 · cited 1×
“Among these sustainably sourced polymers, polylactide (PLA) has proven to be the most attractive and useful choice since it has a good cost structure, the best availability and excellent transparency [4].”
BackgroundLarge-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941 · cited 1×
“Most industrial PLAs are linear thermoplastic polymers that are biocompatible, resorbable and biodegradable under industrial composting conditions [5,6].”
BackgroundAl-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906 · cited 4×
“The reaction mechanisms between PLA/PA11/GMA were supported by the literature and confirmed by FTIR in our previous work [17,36].”
BackgroundResultSelf-citationNew polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Biodegradation of poly(lactic acid) and its nanocomposites
Fukushima, K., Abbate, C., Tabuani, D., Gennari, M., & Camino, G. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.07.001 · Cited by 368
Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0774-2 · Cited by 240
Self-citation
Cited by
Chemical Modification and Foam Processing of Polylactide (PLA)
Standau, T., Zhao, C., Murillo Castellón, S., Bonten, C., & Altstädt, V. (2019) · Polymers · doi:10.3390/polym11020306 · Cited by 210
“Moreover, complex viscosity as a function of angular frequency and steady viscosity as a function of shear rate are also increased due to the increased number of chain entanglements in modified PLA, which is typically correlated to the concentration of chemical modifier [123,124,139,145,147,148,150,183].”
BackgroundDing, Y., Lu, B., Wang, P., Wang, G., & Ji, J. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.11.012 · Cited by 188
Nam, B., & Son, Y. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49011 · Cited by 24
Salehiyan, R., Song, H. Y., Soleymani Eil Bakhtiari, S., Hyun, K., Nofar, M., Shyha, I., & Sun, D. (2026) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c04772 · Cited by 3
Metadata
- Authors
- Walha, F., Lamnawar, K., Maazouz, A., & Jaziri, M.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2016-02-26
- Volume
- 8
- Issue
- 3
- Pages
- 61
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2285836523
- Cited by
- 113
- References
- 7
- FWCI
- 3.63
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rheological, Morphological and Mechanical Studies of Sustainably Sourced Polymer Blends Based on Poly(Lactic Acid) and Polyamide 11. https://app.cochat.ai/papers/10.3390/polym8030061
- The paper
- Walha, F., Lamnawar, K., Maazouz, A., & Jaziri, M. (2016). Rheological, Morphological and Mechanical Studies of Sustainably Sourced Polymer Blends Based on Poly(Lactic Acid) and Polyamide 11. Polymers. https://doi.org/10.3390/polym8030061
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.