The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Fractional Factorial Design Study for the Extraction of Cannabinoids from CBD-Dominant Cannabis Flowers by Supercritical Carbon Dioxide
Open accessAbstract
The optimization of the supercritical fluid extraction (SFE) of cannabinoids, using supercritical carbon dioxide (scCO2), was investigated in a fractional factorial design study. It is hypothesized that four main parameters (temperature, pressure, dry flower weight, and extraction time) play an important role. Therefore, these parameters were screened at predetermined low, medium, and high relative levels. The density of scCO2 was used as a factor for the extraction of cannabinoids by changing the pressure and temperature. The robustness of the mathematical model was also evaluated by regression analysis. The quantification of major (cannabidiol (CBD), cannabidiolic acid (CBDA), delta 9-tetrahydrocannabinol (Δ9-THC), delta 8-tetrahydrocannabinol (Δ8-THC), and delta 9-tetrahydrocannabinol acid (THCA-A)) and minor (cannabidivann (CBDV), tetrahydrocannabivann (THCV), cannabigerolic acid (CBG), cannabigerol (CBGA), cannabinol (CBN), and cannabichomere (CBC)) cannabinoids in the scCO2 extract was performed by RP-HPLC analysis. From the model response, it was identified that long extraction time is a significant parameter to obtain a high yield of cannabinoids in the scCO2 extract. Higher relative concentrations of CBD(A) (0.78 and 2.41% w/w, respectively) and THC(A) (0.084 and 0.048% w/w, respectively) were found when extraction was performed at high relative pressures and temperatures (250 bar and 45 °C). The higher yield of CBD(A) compared to THC(A) can be attributed to the extract being a CBD-dominant cannabis strain. The study revealed that conventional organic solvent extraction, e.g., ethanol gives a marginally higher yield of cannabinoids from the extract compared to scCO2 extraction. However, scCO2 extraction generates a cleaner (chlorophyll-free) and organic solvent-free extract, which requires less downstream processing, such as purification from waxes and chlorophyll.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“the use of co-solvents in SFE often implies a lower selectivity of the extraction process, resulting in extracts with higher concentrations of waxes and chlorophyll, which in turn requires more downstream processing for extract purification depending on the desired application [80].”
From Supercritical Carbon Dioxide Technology for Recovering Valuable Phytochemicals from Cannabis sativa L. and Valorization of Its Biomass for Food Applications (2023) · cites this paper as [80]
In the citing paper
“Qamar et al. [80], when evaluating the influence of extraction time on SFE optimization by fractional factorial design, found that the use of long extraction times (180 min) was a determining factor for higher cannabinoid extraction yields.”
From Supercritical Carbon Dioxide Technology for Recovering Valuable Phytochemicals from Cannabis sativa L. and Valorization of Its Biomass for Food Applications (2023) · cites this paper as [80]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Span, R., & Wagner, W. (1996) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555991 · Cited by 5,049 · cited 5×
“Span, R.; Wagner, W.”
BackgroundInfluentialCarotenoid extraction methods: A review of recent developments
Saini, R. K., & Keum, Y.-S. (2018) · Food Chemistry · doi:10.1016/j.foodchem.2017.07.099 · Cited by 857
Experimental design in chromatography: A tutorial review
Hibbert, D. B. (2012) · Journal of Chromatography B · doi:10.1016/j.jchromb.2012.01.020 · Cited by 449 · cited 1×
“The factorial design is frequently used for the screening of different processing parameters in experiments, especially for the improvement of extraction efficiency and chromatographic separations; the most effective procedure is to evaluate the main contributing factors [15] because, theoretically, the number of expe…”
MethodExtraction with environmentally friendly solvents
Płotka-Wasylka, J., Rutkowska, M., Owczarek, K., Tobiszewski, M., & Namieśnik, J. (2017) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2017.03.006 · Cited by 383 · cited 1×
“SFE is considered a greener technique because of its low impact on the environment, and it does not require the use of hazardous organic solvents [13].”
BackgroundExperimental design of supercritical fluid extraction – A review
Sharif, K. M., Rahman, M. M., Azmir, J., Mohamed, A., Jahurul, M. H. A., Sahena, F., & Zaidul, I. S. M. (2014) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.10.003 · Cited by 311 · cited 2×
“the interactions of the testing materials, and in-depth fluid dynamics, it is considered a black box design [14].”
BackgroundMethodGallego, R., Bueno, M., & Herrero, M. (2019) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2019.04.030 · Cited by 292 · cited 1×
“In addition, SFE is also used to extract the bioactive components and essential oils on a pilot scale [10,11].”
MethodSupercritical fluid extraction of seed oils – A short review of current trends
Ahangari, H., King, J. W., Ehsani, A., & Yousefi, M. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.02.066 · Cited by 264 · cited 1×
“In addition, SFE is also used to extract the bioactive components and essential oils on a pilot scale [10,11].”
MethodBaron, E. P. (2018) · Headache: The Journal of Head and Face Pain · doi:10.1111/head.13345 · Cited by 251
A Primer on Experiments with Mixtures
Cornell, J. A. (2011) · Wiley Series in Probability and Statistics · doi:10.1002/9780470907443 · Cited by 199
Hazekamp, A. (2018) · Medical Cannabis and Cannabinoids · doi:10.1159/000489287 · Cited by 188
Research works printed but not linked: 1
- Verpoorte, 2010, Supercritical fluid extraction of cannabis: Experiments and modelling of the process design, J. Supercrit. Fluids, 52, 1
Cited by
Delta‐8 tetrahydrocannabinol: a scoping review and commentary
LoParco, C. R., Rossheim, M. E., Walters, S. T., Zhou, Z., Olsson, S. E., & Sussman, S. Y. (2023) · Addiction · doi:10.1111/add.16142 · Cited by 84
de Aguiar, A. C., Vardanega, R., Viganó, J., & Silva, E. K. (2023) · Molecules · doi:10.3390/molecules28093849 · Cited by 51
“Additionally, the use of co-solvents in SFE often implies a lower selectivity of the extraction process, resulting in extracts with higher concentrations of waxes and chlorophyll, which in turn requires more downstream processing for extract purification depending on the desired application [80].”
BackgroundA short review of supercritical fluid extraction of plant extracts
Mohammadi, M. A., Safavizadeh, V., Yousefi, M., & Hosseini, S. M. (2024) · Journal of Food Measurement & Characterization · doi:10.1007/s11694-024-02440-x · Cited by 39
“SFE of hemp extract due to its cannabinoids is already popular in USA, Canada, Australia, and Europe [107–110].”
Altunay, N., Tüzen, M., Lanjwani, M. F., & Mogaddam, M. R. A. (2022) · Journal of Food Composition and Analysis · doi:10.1016/j.jfca.2022.104791 · Cited by 36
Phytocannabinoids: Pharmacological effects, biomedical applications, and worldwide prospection
Siqueira, A. L. G. D. B., Cremasco, P. V. V., Bahú, J. O., da Silva, A. P., de Andrade, L. R. M., González, P., Crivellin, S., Concha, V. O. C., Krambeck, K., Lodi, L., et al. (2023) · Journal of Traditional and Complementary Medicine · doi:10.1016/j.jtcme.2023.08.006 · Cited by 33
Progress in the analysis of phytocannabinoids by HPLC and UPLC (or UHPLC) during 2020–2023
Nahar, L., Chaiwut, P., Sangthong, S., Theansungnoen, T., & Sarker, S. D. (2024) · Phytochemical Analysis · doi:10.1002/pca.3374 · Cited by 23
Meta‐analysis and review of cannabinoids extraction and purification techniques
Song, Y., Fürtös, A., Fuoco, D., Boumghar, Y., & Patience, G. S. (2022) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.24786 · Cited by 21
Silva, E. M. P., Vitiello, A., Miro, A., & Ribeiro, C. J. A. (2025) · Pharmaceuticals · doi:10.3390/ph18060786 · Cited by 21
Synthesis of graphene/silica composites and its removal efficiency of methylene blue dye from water
Rind, I. K., Sarı, A., Tüzen, M., Lanjwani, M. F., & Saleh, T. A. (2023) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2023.111507 · Cited by 16
Oanh, D. T. Y., Hiền, L. T. M., Duyen, N. K., Hiếu, N. H., & Dao, D. T. A. (2023) · Vietnam Journal of Chemistry · doi:10.1002/vjch.202300109 · Cited by 15
Optimization of Supercritical Carbon Dioxide Fluid Extraction of Medicinal Cannabis from Quebec
Boumghar, H., Sarrazin, M., Banquy, X., Boffito, D. C., Patience, G. S., & Boumghar, Y. (2023) · Processes · doi:10.3390/pr11071953 · Cited by 14
Charles, A. P. R., Chen, B., & Rao, J. (2024) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2024.2436130 · Cited by 14
“For instance, Qamar et al. (2022) extracted CBD from hemp flowers using SC–”
Calmanti, R., Selva, M., & Perosa, A. (2025) · ACS Agricultural Science & Technology · doi:10.1021/acsagscitech.4c00462 · Cited by 10
Plyduang, T., Monton, C., Maneewattanapinyo, P., & Suksaeree, J. (2025) · Sustainable Chemistry for Climate Action · doi:10.1016/j.scca.2025.100137 · Cited by 10
Waste from hemp essential oil production: How distillation methods shape the byproducts value
Spinozzi, E., Boldrini, L., Ferrati, M., Betti, E., Ricciutelli, M., Zheljazkov, V. D., Dall’Acqua, S., Sut, S., Cespi, M., Petrelli, R., et al. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.121094 · Cited by 9
Nuchtavorn, N., Leanpolchareanchai, J., Visansirikul, S., & Bunsupa, S. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24097870 · Cited by 8
“Thus, factorial design studies are information-rich techniques capable of analyzing analytical data obtaining valid results [22].”
BackgroundRonie, M. E., Prihanto, A. A., Aziz, A. H. A., Sarjadi, M. S., Mokhtar, R. A. M., Putra, N. R., Salim, M. S., Zainol, M. K., & Mamat, H. (2025) · Food and Humanity · doi:10.1016/j.foohum.2025.100963 · Cited by 4
Supercritical Technology Applied to Food, Pharmaceutical, and Chemical Industries
Santana, Á. L. (2024) · Processes · doi:10.3390/pr12050861 · Cited by 3
“Qamar and coworkers [41] employed the half-fractional factorial design to select the best conditions for the SC-CO 2 extraction of cannabis flowers and found that the optimal conditions were 45 ◦ C, 250 bar, and 180 min.”
MethodSupercritical Fluid Extraction
Santana, Á. L., Chañi-Paucar, L. O., Veggi, P. C., Viganó, J., & Meireles, M. A. A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-36340-5.00010-8 · Cited by 2
Two-level non-regular fractional factorial designs for public health studies
Chang, M.-C., & Wong, W. K. (2026) · BMC Medical Research Methodology · doi:10.1186/s12874-026-02784-6 · Cited by 1
“…an example is Pandis et al., [2] who discussed subset of the factor level combinations from a full factorial design to make an inference; an example is Qamar et al., [7] where the goal was to extract cannabinoids from cannabis flowers by a carbon dioxide process using a fractional factorial design.”
Development of Bioactive Cannabis Extracts Through Optimization of Green Supercritical Fluid Process
Boumghar, H. (2023) · PolyPublie (École Polytechnique de Montréal) · Cited by 1
Collett, C. (2023) · K-State Research Exchange (Kansas State University)
Cvetanov, A., Bogevski, K., Maksimova, V., & Janevik-Ivanovska, E. (2026) · Journal of Agriculture and Plant Sciences · doi:10.46763/japs2624123c
Examples of supercritical carbon dioxide extraction transition from laboratory to industry
Lukić, I., & Skala, D. U. (2026) · Supercritical fluid science and technology · doi:10.1016/b978-0-443-33534-1.00007-2
Aplicaciones terapeúticas y técnicas de extracción de canabinoides
Brondo, R. A. D., Marines, L. R., Reimers, E. A. L., Zúñiga1, J. L. D. L. P., Cepeda1, L. F., & Fuentes, J. A. G. (2026) · Journal of BioProcess and Chemical Technology (JBCT) · doi:10.68038/n65kwj95
Metadata
- Authors
- Qamar, S., Torres, Y. J. M., Parekh, H. S., & Falconer, J. R.
- Affiliations
- The University of Queensland (AU)
- School of Clinical Sciences, Queensland University of Technology, Brisbane, QLD 4000, Australia
- Corresponding author
- Qamar, Sadia
- Falconer, James Robert
- Venue
- Processes
- Publisher
- MDPI AG
- Published
- 2022-01-03
- Volume
- 10
- Issue
- 1
- Pages
- 93
- ISSN
- 2227-9717 (ISSN-L)
- OpenAlex
- W4206269745
- Cited by
- 21
- References
- 25
- Citations by year
- 2026: 3 · 2025: 5 · 2024: 4 · 2023: 7 · 2022: 2
- FWCI
- 1.31
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Processes (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Australian Government
- University of Queensland (QLD 4072)
- Topics
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Phase Equilibria and Thermodynamics
- Health Sciences › Medicine › Pharmacology (medical) › Cannabis and Cannabinoid Research
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Toxicology › Forensic Toxicology and Drug Analysis
- Keywords
- supercritical CO2 extraction, cannabinoids, cannabis flower, extraction parameter optimization, fractional factorial design, cannabidiol, cannabidiolic acid, tetrahydrocannabinol, extraction time, extraction pressure and temperature, extraction yield
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.